Show your slip joint's thread!
-
Oh,and I've got a Buck 373 :D
-
:D
-
I heard something drop through the letterbox and saw this guy running away. I'm pretty sure he's not my usual postman. ;)

-

I quite like the size of the second blade. It's just a touch bigger than the small Vic blade.
Sent via just taaap it in... just taaap it in... give it a little tappy... tap tap taparoo.
-
That's a nice knife.
that's us mobile, eh.
-
Taken from BF: http://www.bladeforums.com/forums/showthread.php/1128952-The-good-stuff…-Delrin-amp-Stagalon/page2
Some information on Derlin"Delrin is an acetal thermoplastic resin (PolyOxy-Methylene or POM) which has a semi-crystalline structure, is machinable, and possesses excellent strength and dimensional stability, high lubricity (low friction characteristics), and good wear resistance.
Dupont’s advent of Delrin came about from their post-WWII search for wider applications of their popular nylon. When Department director Frank McGrew and their chemists in the Polychemical department searching for a plastic replacement for metals first came across the formaldehyde derivative which we now know as “Delrin”, they named it “synthetic stone”. This was circa 1952. It took another four years of development to refine the process for production and in 1956 they were granted the patent for Delrin. Another four years and twenty million dollars was invested in a facility to manufacture Delrin, and in 1960 the plant in West Virginia opened and began large scale production with a twenty million pound annual capacity.
After a total fifty million dollar investment, Dupont cited patent disputes and competition for shallow profits on the material. Bad for Dupont, but a boon for the knife industry as Delrin quickly became a premier handle material for many companies, Schrade and Camillus included. Nearly fifty years later, Delrin is still an important material in the cutlery industry.
Along with the properties of Delrin already mentioned, another very important one exists which makes this plastic such a winner for knife handles. It can not only be colored as a base material, but it can be dyed after molding to add accent colors. This is what gives “Staglon” it’s stag appearance, and “Genuine sawcut Delrin” it’s sawn bone appearance.
After the Delrin handles are molded, sprues and gates (sometimes called runners) trimmed, they had to be dyed. Two heated dye tanks are used, one brown for OT covers, and an additional black for the UH covers. The tanks were heated to 180 degrees, far below the melt temperature of Delrin. but hot enough for the dye to penetrate the surface and set. I am not familiar enough with this particular dye to tell you what the color base material and mordant are, but most dyes (as with most paints) have mineral base ingredients. A mordant is a chemical (usually acid or alkali) which acts as a penetrating agent and carrier solution. Like the vinegar used with Easter egg dyes. In this case, it could well have another type of mordant.
The covers were dumped into the first dye vat and an operator stirred the parts every few minutes to prevent the parts from streaking from dry spots, and weakened dye, or contact with the vat. They also occasionally lifted some parts with the stir paddle to check the color. If the dye was fresh, time in the dye tank was about 25 minutes. When the dye was weakened from use, dying times were extended by the operator to compensate, until they judged the dye needed replacement.
This whole operation was dependent upon the judgement of the operator. When the parts reached the desired color, they were removed from the dye vat with a shovel and are placed in a basket in the rinse tank. After rinsing clean, the basket was lifted and drained, and the parts spread on a drying table. Ours in the machine shop are perforated stainless with reversible air flow for updraft heated air, or downdraft cool air, depending on the part.
At this point, the covers would be a uniform dark brown color. For the UH covers, they went from the brown dye (approx. 15 min, or until the proper reddish brown color is achieved) then to the rinse, then to the black dye tank for another 10 minutes or so, depending on dye strength. They were again rinsed, and went to the drying tables.
The fact that Delrin takes and holds dyes so well made the material a good substitute for celluloid handles of ad specialty knives also. A heated die was pressed onto the handle over a dye tape, scoring the handle and filling the impression with dye. In 1975, the resident Schrade artist, a very talented man by the name of Frank Giogianni, bored with the commercial art he created for packaging, logos, and commercial ad knives, presented Henry Baer for his consideration a cream Delrin handled scrimshaw knife of his own design. Baer enthusiastically approved and the commercial art became creative decorative art and the popular Scrimshaw series was born." -
-
@ducttapetech said:
That's a nice knife.that's us mobile, eh.
Cheers!
I know it's not exactly a subtle design, but I like it, especially the bright green colour. :D@RamoN said:
Ok now you made me order one, hope you are happy

It is sure to bring you good luck. It's plastered with shamrocks and horseshoes! :D -
Schrade 833UH, arrived today, as a replacement for my last UH staglon knife.
Good condition, with what looks the original grinds, one tiny scratch on the staglon, some rust on the springs. The main spring is nicely centred but the secondary one touches the liners.
It will be cleaned properly later and the rust will be treated.



-
Nice Schrade. I have a stockman from this era, but much prefer the jack pattern. Your Staglon looks much more realistic than mine, with a more "burnt" look.
-
I don't know; the previous one I had had a nicer staglon. This one looks a bit bleached, a bit pale. Maybe because the other one was more used it had achieved a nicer, more natural look.
-
@dks said:
I don't know; the previous one I had had a nicer staglon. This one looks a bit bleached, a bit pale. Maybe because the other one was more used it had achieved a nicer, more natural look.Possibly. All I know is that mine looks like smurf compared to that one, like it sat out in the sun too long. ;)
-
Very nice, dks.
I don't have an Uncle Henry in my collection yet..... -
@jerseydevil said:
Very nice, dks.
I don't have an Uncle Henry in my collection yet.....They are available but there seems to be a lot of bad ones around too. Make sure you check it first. $20-$30 should get you a good used one.
There are some new, old USA, ones too which should be the best option, though their prices are a bit high. -
Just a heads up for anybody intersted in getting GEC slipjoint knives; They have produced a reasonably price offering, which comes in a variety of nice colours/materials that should be good as a general use, penknife style, knife for most people.
It is a good knife for someone that wants to get a GEC for not too much money. It is also small so that you can carry it easily. (I am not buying one yet but that is my loss..) 1095 carbon steel (i.e. it may rust)Here are some pictures:




-


After reading through a thread in BF I realised that I did not have an Ettrick knife:
"The Ettrick is a very traditional Sheffield pattern, which some claim goes back to the 1700’s. It’s name comes from the Scottish Ettrick Valley, where it was used by sheep farmers. It is a sort of Swayback Wharncliffe, but classic Ettricks have the blade set so that the whole knife (when open) forms a sort of lazy ‘S’. They may also appear to have a blade which is shorter than the length of the handle might suggest."http://www.bladeforums.com/forums/showthread.php/1119303-What-is-the-Definition-of-Ettrick
The knife is lower cost, working knife, made in Sheffield by A. Wright and son.
The overall quality of my sample is pretty good . Nicely polished brass bolsters, centred blade, nice looking wood, smooth hidden pins. There is a bit of grit in the pivot and the pull is stronger than I like but still reasonable.There are other more expensive models too made by various makers. This,however, is a working knife so you do not need to spend too much on one.


Similar ergonomic handle...

-
Nice ettrick

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
