Farmer saw replacement
-
It looks like it'll be the 93mm solo method.
I'll give Amazon a hit & have a play with one.
http://www.amazon.co.uk/gp/product/B000MLXVHG/sr=8-1/qid=1391344019/ref=olp_product_details?ie=UTF8&me=&qid=1391344019&seller=&sr=8-1I saw the vid by "Iowa Guy" where he used the scissor backspring from his donor knife but I wasn't too keen on having a hook on the back of an alox farmer.
-
Using a Solo spring has a few catches.
First of all you won't have a rest for the scissors' blades. The stopping position is defined by the spot where the scissors' handle touches the spring when folded.
Second, you won't have enough snap to get that "factory feeling". To achieve this you'll have to "reshape" the spring by bending it using a hammer and a vice.However, it's possible to make it work perfectly using a Solo spring if you consider the points above.
By the way, keep in mind that you will have to drill out the pivot hole of the 91mm scissors since it's 2.5mm in diameter, where 93mm Alox uses 3.0mm.
-
Thanks for the advice crackout, I've just been pricing the "donor" knives I'm going to need to create my ideal SAK which would be a 93mm alox with scissors, side by side openers & inline philips driver which I'm hoping to create out of my black alox farmer.
So far it's come to £72.Alox Solo for backspring
Pioneer for extra opener backspring
Explorer for scissors & inline philips.As I'm unable to source any threaded barrels in the UK I'll have to teach myself the art of peening! :ahhh
All this will have to be put on hold now however as I've just had word that I'm due into hospital tommorrow (they finally found a bed) & I'll be out of action for a couple of months.
-
Best of luck with your hospital trip Dave.
Back to the SAKs,the way those numbers are adding up,it might just work out for you to have a chat with Syph

-
@kirk13 said:
Best of luck with your hospital trip Dave.Back to the SAKs,the way those numbers are adding up,it might just work out for you to have a chat with Syph

You might have a good point there!
By the time I rig myself out with a drill press, drill bits, vice, hammers etc I'm going to be well over the £100 mark.
Considering that an Explorer already has the tools I need, another alternative would be to try & locate an Appalachian Trail, Coast or other cheapo with alox scales & try fitting them to the Explorer! -
I've spoken to Syph about getting an Alox Explorer or something similar made up,and while I found his price to be very fair,for what is effect a bespoke knife,it was more than I could justify spending.
But if you take into account the risk of screwing up a first,or even second attempt,then you'll end up saving money!
Oh,and in case anybody thinks I'm being mean with reference to Syph's prices,the most I've paid for any fixed blade or folder has been about £50, and unless there's a major windfall,I can't see that changing :D
-
my 91mm Alox Explorer. Handmade scales... old style ribbed rather than checkered.
<a href="http://s1309.photobucket.com/user/Peter_Thorpe/media/20130104_225125_zps0444c160.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20130104_225125_zps0444c160.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
These were made without machine tools like a mill. Only drill press to drill the holes. and that could have been done with a steady hand and a cordless drill. Other than that it was hacksaw and files.
It's doable if you have the time and patience.
I should have gone for a hidden 4th pin... -
@PTRSAK said:
my 91mm Alox Explorer. Handmade scales... old style ribbed rather than checkered.<a href="http://s1309.photobucket.com/user/Peter_Thorpe/media/20130104_225125_zps0444c160.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20130104_225125_zps0444c160.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
These were made without machine tools like a mill. Only drill press to drill the holes. and that could have been done with a steady hand and a cordless drill. Other than that it was hacksaw and files.
It's doable if you have the time and patience.
I should have gone for a hidden 4th pin...You're giving me ideas now!
I'm going to have the next 4 weeks lying in a bed to decide what to do so hopefully I'll come up with something.
I think you're right about hiding the 4th pin, I'll see what happens once I master the dark art of peening! -
Best of luck with your hospital trip Dave.
Back to the SAKs,the way those numbers are adding up,it might just work out for you to have a chat with Syph

You might have a good point there!
By the time I rig myself out with a drill press, drill bits, vice, hammers etc I'm going to be well over the £100 mark.
Considering that an Explorer already has the tools I need, another alternative would be to try & locate an Appalachian Trail, Coast or other cheapo with alox scales & try fitting them to the Explorer!Why not make some scales out of brass or sheet aluminum that'll fit the Explorer? The back tools will be an added bonus.
-
Best of luck with your hospital trip Dave.
Back to the SAKs,the way those numbers are adding up,it might just work out for you to have a chat with Syph

You might have a good point there!
By the time I rig myself out with a drill press, drill bits, vice, hammers etc I'm going to be well over the £100 mark.
Considering that an Explorer already has the tools I need, another alternative would be to try & locate an Appalachian Trail, Coast or other cheapo with alox scales & try fitting them to the Explorer!Why not make some scales out of brass or sheet aluminum that'll fit the Explorer? The back tools will be an added bonus.
The more I've been thinking about it the more I'm leaning to the idea of an Explorer with brass scales.
It would seem criminal to take an Explorer apart just to get the scissors & philips driver from it for a 93mm mod! -
I've done a few knives with brass scales too, they do end up noticeably heavier than standard or aluminium scales, but they do look nice.
<a href="http://s1309.photobucket.com/user/Peter_Thorpe/media/20130113_202418_zps758f8185.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20130113_202418_zps758f8185.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@PTRSAK said:
I've done a few knives with brass scales too, they do end up noticeably heavier than standard or aluminium scales, but they do look nice.<a href="http://s1309.photobucket.com/user/Peter_Thorpe/media/20130113_202418_zps758f8185.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20130113_202418_zps758f8185.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Forgot you did the steampunk ones. They do look very cool.
I agree on the brass, everytime I start a fancy project and go with brass, the scales alone feel so heavy I give up and go back to aluminum or titanium for weight reasons. Ti is so nice and light.
-
@PTRSAK said:
I've done a few knives with brass scales too, they do end up noticeably heavier than standard or aluminium scales, but they do look nice.<a href="http://s1309.photobucket.com/user/Peter_Thorpe/media/20130113_202418_zps758f8185.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20130113_202418_zps758f8185.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Very nice! I really like those!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
