SAK... Why???
-
The Swisschamp and the CT41 are the same size. But you will lose the fish scaler and mag/phillips layer. But will gain the bit driver. Its great for all kinds of stuff. Not just for 'puters.
Here's a pic of a Ct34.


that's us mobile
-
Lose the fish scaler/ french fry spear?!?! HERESY!!!

-
The biggest shortfall of the SAK's IMO. They completely lack of single hand access. Not to mention if your nails are short or you bite them. It's very difficult to open.
-
Received this in the mailbox today.... :D

-
@Dale said:
The biggest shortfall of the SAK's IMO. They completely lack of single hand access. Not to mention if your nails are short or you bite them. It's very difficult to open.I agree, but someday I'll make OHO blades to use with liner locks. :D
Once I made a single layer alox electrician solo with a thumbstud.


-
The biggest shortfall of the SAK's IMO. They completely lack of single hand access. Not to mention if your nails are short or you bite them. It's very difficult to open.
I agree, but someday I'll make OHO blades to use with liner locks. :D
Once I made a single layer alox electrician solo with a thumbstud.


+1 Holler at me when you start mass producing.
-
-
The only thing I don't like about the Spirit is my compulsive need to wipe my fingerprints off the shiny surface after I've handed it. :D
-
Hail to the King!
Swisstool is even more "tankish" but this loves to be on the go and thus it gets a lot of use. That's the Spirit! -
Received this in the mailbox today.... :D

Whatdaya think?
Whatdaya think?It's definately the prettiest MT I've ever held. The worlmanship is awesome.
Isn't it though? I have mine here at the computer currently, so I've been fiddling with it after seeing your pic ;)
-
My main issue with swisstools is that they just look too prety to use, even the ones with coloured handles. So i just polish/clean them.
-
-
My main issue with swisstools is that they just look too prety to use, even the ones with coloured handles. So i just polish/clean them.
I use mine a lot. But I now have a backup in case the user gets damaged. :D
I didn't think I'd want to use my swisstools with them being so polished, but I had no problem once in hand. These really are the top MT IMO however the OHO is a real convenience.
-
Anyone besides myself wonder why they haven't upgraded their steel to S30V?
-
Who says S30V is an upgrade?
Harder? Maybe. Hold an edge better? Maybe.
More corrosion resistant? unlikely. Easier to resharpen, very unlikely.
More likely to fracture than bend? Most probably.
It's all give-and-take, and I think Victorinox has settled on the steels that give it the properties it desires most (within the constraints of cost).
-
@Lynn LeFey said:
Who says S30V is an upgrade?Harder? Maybe. Hold an edge better? Maybe.
More corrosion resistant? unlikely. Easier to resharpen, very unlikely.
More likely to fracture than bend? Most probably.
It's all give-and-take, and I think Victorinox has settled on the steels that give it the properties it desires most (within the constraints of cost).
Very true, but S30V is THE top rated steel available these days.
-
@Lynn LeFey said:
Who says S30V is an upgrade?
Harder? Maybe. Hold an edge better? Maybe.
More corrosion resistant? unlikely. Easier to resharpen, very unlikely.
More likely to fracture than bend? Most probably.
It's all give-and-take, and I think Victorinox has settled on the steels that give it the properties it desires most (within the constraints of cost).
Very true, but S30V is THE top rated steel available these days.
I ran a thread querying exotic steels on pocket knives a few weeks back,and generally speaking most folks with every day needs found a 440 steel to be just fine! Admittedly there are jobs where something like S30V,or rust resistant steels are justified,but the majority of SAK owners and users are neither fanboys,nor heavy users. The bulk of SAKs live quiet lives in handbags and rucksacks,gloveboxes and trouser pockets,quietly coming to the rescue,but otherwise spend their time Clark Kent-ing.
There just hasn't been the need to upgrade!
-
@Lynn LeFey said:
Who says S30V is an upgrade?
Harder? Maybe. Hold an edge better? Maybe.
More corrosion resistant? unlikely. Easier to resharpen, very unlikely.
More likely to fracture than bend? Most probably.
It's all give-and-take, and I think Victorinox has settled on the steels that give it the properties it desires most (within the constraints of cost).
Very true, but S30V is THE top rated steel available these days.
I ran a thread querying exotic steels on pocket knives a few weeks back,and generally speaking most folks with every day needs found a 440 steel to be just fine! Admittedly there are jobs where something like S30V,or rust resistant steels are justified,but the majority of SAK owners and users are neither fanboys,nor heavy users. The bulk of SAKs live quiet lives in handbags and rucksacks,gloveboxes and trouser pockets,quietly coming to the rescue,but otherwise spend their time Clark Kent-ing.
There just hasn't been the need to upgrade!
I can see your point & agree to a point. I mean who really needs a can opener made of S30V?
But I'm leaning toward the Multi tool venue of the SAK line.. Like the Spirit, SwissTool Etc. Arguably these are premier MT's in their venue. Not bashing 440 or anything like that. But they sure aren't giving these things away. Even Leatherman has incorporated S30V into their "Juice" tools. I'm simply stating when paying premier prices for MT's shouldn't premier metals be used?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login