New Victorinox Delemont Collection (Wenger)
-
Looks like I will have to get a few different models when they come to market.
-
@Marius said:
I think that only Evo scales were still in production at Wenger before this. The classic scales were discontinued long time before.The Classic line was still listed on both the 2012 European and North America catalogs.
The 2013 Herbertz catalog I posted in the Wenger topic, lists the Classic line, also.
So, I would say that, at least in Europe, the classic scales were pretty much in production and available. -
I think that only Evo scales were still in production at Wenger before this. The classic scales were discontinued long time before.
The Classic line was still listed on both the 2012 European and North America catalogs.
The 2013 Herbertz catalog I posted in the Wenger topic, lists the Classic line, also.
So, I would say that, at least in Europe, the classic scales were pretty much in production and available.Where, Basilio? Here? ->
@basilio said:
I found a 2013 catalog from the Germany company Herbertz, a knife company from Solingen which also distributes other knives brands.
Wenger is one of those.
I found in their 2013 catalog two interesting models I was not aware.
The first is a Evowood 14 with the scales not in walnut but <u>pear</u> (if I translates correctly Birnenholz).
The second is a Junior model with EvoWood scales, named JuniorWood 11.
The catalog is interesting because it has also the three Ranger models with orange scales.
I'll try to scan it all.As I wrote, I think (as in I do not know for sure) that the classic scales (on 85mm and 130mm) were discontinued already. I did not research the subject but all new such Wenger SAKs that I saw for quite a while being available in the stores that I frequent were all Evo style. I did not see a new (not NOS, obvious from packaging as well) classic style scaled for quite some time.
If they were not, great. It could also be remaining stock being sold while the models in discussion being no longer produced.
By the way, the little wood lip being present on the Pear EvoWood and missing on the United Woods and recent EvoWoods suggests that those Pear may be in fact a short NOS run now being liquidated as it would be a 'new' model.
-
Vic omitted not only the Giant, but also the mini-Giants: RangerGrip 88 (Rescue I) & 95 (Rescue II). These have (had?) the basic tools most used in one package: a good set of pliers, wood saw, metal file/saw, flat head screwdrivers, awl, & Phillips.
They also dropped the 90 (Handyman), a somewhat more compact version of the Rescues.
O how the mighty have fallen! -
Many thanks Tim !
I still do not understand why they could not have produced these exact models (with the changes) with the Wenger branding, sold through the Victorinox sales network. ???
-
I do have a Wenger 2013 catalog from Switzerland and it does still have the Classic line, although obviously the Evo scales are more prevelent. I have not scanned it because it is in prestine condition. I've not even really looked at it in any detail because the information was available for the most part on-line. I don't want to crease the binding I want to keep it as new as possible right now, and there is not a shortage of information on recent models. I'm hoping to find another copy so I can scan it and preserve it as it is historically significant in the SAK world. I hope I can find one.
I suspect the Classic scales have not been manufactured for a while, but I think Wenger was probably making new knives with them as demand required using their inventory of scales. So technically the models were still in production. Most retailers though did migrate to the Evo Scales where the models were more plentiful, colorful, and as a differentiator in the market. This is why the Classic models did not appear especially in North America. It is very likely that the Classic line had not been imported into North America for a while except on 65mm.
-
Am I the only one who likes the contoured scales? Most people like the classic?
One thing I do not like is the contoured scales with the rubber inserts. Looks like all the rangers have those too... Oh well as long as they are still making them I can still make alox scales for them anyhow.
-
@Syph007 said:
Am I the only one who likes the contoured scales? Most people like the classic?One thing I do not like is the contoured scales with the rubber inserts. Looks like all the rangers have those too... Oh well as long as they are still making them I can still make alox scales for them anyhow.
For me it really depends on the model whether I think the evo-scales work for me. I really like the EvoWood scales, sort of the best of both worlds, slim but contoured. I also really like EvoGrip scales, but I'm not confident the rubber inserts will hold up. If Vic continues to make these I may use my EvoGrips more as I know I'll be able to get replacement scales.
I think the Evo scales suit the large Ranger series, but if you've used the original rangers, especially those with 3 layers or less, you will see the original scales were quite well suited to these knives I think. Now on a Ranger 95 I think the EvoGrip Scales are the perfect match. I've come to appreciate the Evo on the Ranger 50, they work very well.
-
Thanks for sharing

-
@marduk said:
Vic omitted not only the Giant, but also the mini-Giants: RangerGrip 88 (Rescue I) & 95 (Rescue II). These have (had?) the basic tools most used in one package: a good set of pliers, wood saw, metal file/saw, flat head screwdrivers, awl, & Phillips.
They also dropped the 90 (Handyman), a somewhat more compact version of the Rescues.
O how the mighty have fallen!Too bad to hear that

I like that Rescue couple 88 & 95 too

-
Tim, Thanks for the 2014 catalog scans. :) I'm surprised they do not put it on-line and save us all the trouble.
I'm particularly glad to see two knives remain the Clipper (now the Clip) and the S17. With respect to to the 0.6463.US2 NAIL CLIP 580 [65MM) I see in the celidor scaled version that the photo shows the classic scales modified for the Victorinox implements whereas the line drawings show the evolution scales. Unfortunately, I do not see the airline friendly version with screwdriver instead of blade. That is also useful for other areas where there might be checkpoints although I do not know how it would do for courts, amusement parks, and sporting events. I did travel with one. Questions one way, no comment the other.
I am particularly looking forward to the 2.3913.SEUS2 EVOLUTION S17 [85MM]. As the successor to my first SAK, a 1 17 01 Wenger, it has always been a favorite. I could argue either way on the small blade/fingernail file but the latter is useful and the 85mm blade is smaller to begin with. Although as a can opener I do not have a strong preference, and the Wenger style sharp point can opener can have alternated uses, I do prefer the Victorinox style for the added utility with Philips screws. Similarly although the Wenger style reamer does have some uses (and might have more with squared edges versus polished), I far prefer the Victorinox style reamer/awl. It is a great size for a travel knife, checked if by air, and I think it will have added utility with the revised implements. I plan on buying it.
...now if they come out with a Huntsman with locking blade and locking screwdriver/cap lifter, I'll need that too. :D

-
@Syph007 said:
Am I the only one who likes the contoured scales? Most people like the classic?One thing I do not like is the contoured scales with the rubber inserts. Looks like all the rangers have those too... Oh well as long as they are still making them I can still make alox scales for them anyhow.
Well, I like all of them, each on its own way ...
:D -
Vic omitted not only the Giant, but also the mini-Giants: RangerGrip 88 (Rescue I) & 95 (Rescue II). These have (had?) the basic tools most used in one package: a good set of pliers, wood saw, metal file/saw, flat head screwdrivers, awl, & Phillips.
They also dropped the 90 (Handyman), a somewhat more compact version of the Rescues.
O how the mighty have fallen!Too bad to hear that

I like that Rescue couple 88 & 95 too

86, 88 and 95 were never production models. THey were limited editions made for the Bulgarian Mountain Rescue Service (88 and 95) and a Russian forum forum.Guns.ru (86 EastRanger) all in limited series of 500. MTO was contacted by the Russians for the EastRanger also.
Here's the thread on it. --> Wenger East Ranger Project: Poll!!!
-
It will be interesting to see if the 2014 Catalog for Switzerland or other major markets have models that are different than those for North America.
I'm liking the Evo 28, S101, EvoGrip S101. I'm very surprised that I don't see a Ranger 50 model, I would have bet money that they would offer that one. I'm sad that there are no rangers with Metal Files/Saws.
I'm pretty sure we can expect some special editions in the future, and maybe just a little cross border shopping like for the Evo14 Pear Wood.
-
Vic omitted not only the Giant, but also the mini-Giants: RangerGrip 88 (Rescue I) & 95 (Rescue II). These have (had?) the basic tools most used in one package: a good set of pliers, wood saw, metal file/saw, flat head screwdrivers, awl, & Phillips.
They also dropped the 90 (Handyman), a somewhat more compact version of the Rescues.
O how the mighty have fallen!Too bad to hear that

I like that Rescue couple 88 & 95 too

86, 88 and 95 were never production models. THey were limited editions made for the Bulgarian Mountain Rescue Service (88 and 95) and a Russian forum forum.Guns.ru (86 EastRanger) all in limited series of 500. MTO was contacted by the Russians for the EastRanger also.
Here's the thread on it. --> Wenger East Ranger Project: Poll!!!
I'm somehow acknowledged with that

but I've seen them in the Czech R. and its surroundings in the past,
and I was let's say close to start "purchase project",
when arose some housekeeping issues, comp issues ...
:ahhh
Anyway, no panic here, it's still on the wish list,
and sooner or later ... will come a time when
:D -
Sweet Tim, thanks for posting this up.
OK So I don't know to much about Wenger knifes apart from the early history - I made a decison when I first started that Vic's were the knifes for me and that I would only collect them. Not because I didn't like the Wenger knifes, it was more that there are a tone I want to get on the Vic side of things, and do I really want to collections?
Plus if I started looking to in-depth at the Wenger knifes I knew I would want them all ........
I am now SCREWED - I want them all :face palm: - Also gutted I did not look at Wenger knifes sooner!!!!! -
First on my list is an Nail Clip wood
. -
@kkokkolis said:
I see Vic can opener and awl and the rest are Wenger's. Very rational!I remember that some said the Wenger **corkscrew **was more prone to bend out of shape than the Vic corkscrew.
Can anyone tell what corkscrew is being used in the Delemont Line ?
Anyone feel that the Wenger corkscrew really is "softer" ? -
I see Vic can opener and awl and the rest are Wenger's. Very rational!
I remember that some said the Wenger **corkscrew **was more prone to bend out of shape than the Vic corkscrew.
Can anyone tell what corkscrew is being used in the Delemont Line ?
Anyone feel that the Wenger corkscrew really is "softer" ?I used a Wenger corkscrew extensively and never bent one.
-
Vic omitted not only the Giant, but also the mini-Giants: RangerGrip 88 (Rescue I) & 95 (Rescue II). These have (had?) the basic tools most used in one package: a good set of pliers, wood saw, metal file/saw, flat head screwdrivers, awl, & Phillips.
They also dropped the 90 (Handyman), a somewhat more compact version of the Rescues.
O how the mighty have fallen!Too bad to hear that

I like that Rescue couple 88 & 95 too

86, 88 and 95 were never production models. THey were limited editions made for the Bulgarian Mountain Rescue Service (88 and 95) and a Russian forum forum.Guns.ru (86 EastRanger) all in limited series of 500. MTO was contacted by the Russians for the EastRanger also.
Here's the thread on it. --> Wenger East Ranger Project: Poll!!!
I suspect that the 88, 95, & the 86 may very well have been production models. I believe more than just 500 were issued. All 3 were produced both with & w/o special markings. The 88 & 95 are still advertised at the Wenger shop in Bulgaria as is the East Ranger w/o printing on the blade.
-
Sad to see no setup of two blade, scissors and cap lifter/large screw driver, can opener/small screw driver.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login