NEW Leatherman SURGE owners club.
-
@CanadianLMfan said:
It'll probably fall right through my pocket.
You need some better jeans. ;)
-
I have a Surge with full extras that used to be a user, until I got my Swisstool Spirit and realized how a highest standard quality multitool feels like. So I'm not thrilled by the new Surge, unless it is more robust and has less play and rattle.
So, those that have used both, is the new one better and with lower manufacture tolerances? -
Don't have a old surge to compare but I am pretty happy with the new one once I got use to its weight.
Sounds like I must get my hands on the swisstool to try it out. -
I is much improved. Tight and smooth. Not a swisstool quality but the biggest issues have been fixed,no jamming, no rattle.
-
It'll probably fall right through my pocket.

You need some better jeans. ;)
Yes I do. :P
-
@kkokkolis said:
I have a Surge with full extras that used to be a user, until I got my Swisstool Spirit and realized how a highest standard quality multitool feels like. So I'm not thrilled by the new Surge, unless it is more robust and has less play and rattle.
So, those that have used both, is the new one better and with lower manufacture tolerances?Per your suggest, I went to store to handle Swisstool and did some research.
You are correct, Swisstool is perfectly built, superior fit and finish, I will definitely purchase one in future.
But I still prefer the New Surge over Swisstool for the following reasons.- OHO blades.
- Outside quick access saw and scissors.
- Heavy duty strong pliers with replaceable wire cutter. (in case they are damaged)
- Adaptable Bits
- Adaptable & easily replaceable saw blades and file. (in case they are damaged and wore out)
I am under the impression of the Swisstool has larger selection of tools but not not necessary heavier duty.
(many of its tools are exactly same as other SAK)
Even-though all tools are accessible from outside, but they are slower and harder to deploy (finger nail required).
I would see myself spend a little longer to navigate through its two mass groups of tools to locate the one I need.
And its boxy profile looks a little boring.Just my own opinion
-
One more thing about the new surge. Until now my I handled it around my girlfriend and coworkers who are quite used to me and my toys.
But this beast can be really intimidating... When you whip the surge out (mine is smooth enough for me to flip it open butterfly knife style) you can see proper WTF looks at peoples faces. The size, new plier head and the shine of the steel really makes an impression, and not always positive. -
@kkokkolis said:
is the new one better and with lower manufacture tolerances?I have 2 of the old ones, and 1 of the new versions (black oxide), and I would say they are all the same in the fit/finish/tolerances department. Great for their intended purpose of actually being used as MTs (and I would characterize the Surge F&F as excellent), but still not nearly as smooth as its Swiss competitor.
-
That is a nice Surge there! :)

-
For those still crying about no Eyeglass Screwdriver on New Surge.
-
@Lam.Kampfer said:
For those still crying about no Eyeglass Screwdriver on New Surge.+1

-
Absolutely brilliant idea. As I have the small bit in my bit kit I used it once or twice in a pinch by holding it with the pliers. But it's a pain to use it that way, you have solved my problem :)
Please write to leatherman with this idea, also post it in the mod squad. Many people sacrifice the small driver for other tools, but with your solution all you need is to drill a small hole with dremel somewhere on the tool to accomodate the bit. -
@Lam.Kampfer said:
For those still crying about no Eyeglass Screwdriver on New Surge.So simple in just putting the eyeglass driver bit in the slot where the belt/lanyard clip goes in with the spring lock holding it in place. No need for any drilling or anything and just removing it and putting it back in the bit card when done. I just tried it with my Wave and it works just as well.
-
By "drill a hole in any tool" I meant that you can do this even on mt without the pocket clip slot. Like rebar or wingman.
-
For those still crying about no Eyeglass Screwdriver on New Surge.
So simple in just putting the eyeglass driver bit in the slot where the belt/lanyard clip goes in with the spring lock holding it in place. No need for any drilling or anything and just removing it and putting it back in the bit card when done. I just tried it with my Wave and it works just as well.
Exactly, no modification.
Fine for driving small screws, but not for poking or drilling. -
@BigMatt said:
By "drill a hole in any tool" I meant that you can do this even on mt without the pocket clip slot. Like rebar or wingman.Depending on how much torque you would need to tighten an eyeglass screw, the tension on the Rebar locking tab should be strong enough to hold the bit and tighten/loosen a tiny screw. Just tried it with my Rebar and it held enough to loosen and then tighten a screw on a pair of sunglasses. :D
You're right though, on a Wingman/Sidekick there isn't a locking tab, hole, or any slot to slide the eyeglass driver bit into. :(
On another note, I'm going to have to make a trip over to the Army Exchange to see if they got any New Surge BO versions in. Haven't seen any New Surge (SS or BO) at the Navy Exchange yet. :o
-
DIY file / saw blade sleeve -> </topic/50191
-
I am still very pissed about they did not fix the pock clip issue.
-
I love the new surge
. so much better for a few reasons i even started edcing it in my back pocket. My old surge rattled even with the blade ex-changer empty. If I picked the tool up and let one side hang down it would open a tiny bit it wasn't bad or faulty and didn't ruin function. But I have handled other LM tools with nice tight lock ups and solid construction not a hint of change jangle. plus the end caps looked over tightened and warped.This Updated Surge is fantastic its build solid all my old concerns are addressed and i got less BO rub off than my first one. Now if they would make a better pocket clip that didn't wobble in the surge they would have covered all bases for everyone. I didn't mind they ditched the little eye glass driver i always figured if you dropped that tool on your glasses it would smash them any way.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
