MT Files?
-
The file is one of my most commonly used tools. A MT without a file really puts me off buying it.
As for all the gunk, I either rub it with a rag or clear it with an old toothbrush.
-
Yep it's a deal breaker for me if it's not got a file, and as for cleaning it, just a bit for soapy water and a scotch pad if it's really bad :)
-
Agreed, a toothbrush works best for cleaning. I also much prefer a file that has the teeth running all the way to the tip of the file blade.

-
I use mine to sharpen garden tools and diamond end on knives and fish hooks,us stainless steel or brass brushes to clean up,I've even used the end of the file as a big flat screwdriver.
-
I use mine all the time for sharpening in the field when camping or rescueing. I also use it on my firesteel.
-
@Leatherman123 said:
So, do any of you actually use the file found on MTs and SAKs? I have never really had a need for one. Oh, and when you do use it- how do you take all the crap out of it?Even though I may not use a multitool file very often, I greatly value having a file available on multis carried outdoors.
I see having that file as incredibly important for emergency repair and survival situations.
A file has an amazing capability that no other implement on a multi can really provide: to cut through metal.
The ability to cut metal could be absolutely crucial in various survival scenarios.
.
-
Can't argue with that :)
-
I clean my files on a rag, if it's really gunked up I'll use a wire brush.
I use the file for smoothing rough edges in metal and plastic after Dremeling them for the most part, and light sawing of small things.
-
A file is one of those things I like to have on a multitool as well as scissors. I prefer the LM diamond file.
-
I have always used files of every shape and size for sharpening or smoothingdown things, so if I can put one in my pocket and carry it around without hurting myself :D I think that it's great. I usually use a file cleaner when mine gets dirty. All it is is a short wired, wire brush and it gets all the crud out :D It is a really big plus on a multi and I don't know if I would have a regular sized MT without a file ;)
-
For me, the file/metal saw is one of the most essential multi implements. I use it a lot for mundane maintenance repair stuff but what ringzero said is the real reason I like to have it on my tools.
I see having that file as incredibly important for emergency repair and survival situations.
A file has an amazing capability that no other implement on a multi can really provide: to cut through metal.
-
So, do any of you actually use the file found on MTs and SAKs? I have never really had a need for one. Oh, and when you do use it- how do you take all the crap out of it?
A file has an amazing capability that no other implement on a multi can really provide: to cut through metal.
The ability to cut metal could be absolutely crucial in various survival scenarios.
I'm very curious about this potential use. I remember about 25 years ago as a kid I tried to saw through some hunk of metal with my Vic Champion's file without much success. It removed much of the small teeth on that file.
What kinds of metal or objects can the LM and Vic files go through well?
-
So, do any of you actually use the file found on MTs and SAKs? I have never really had a need for one. Oh, and when you do use it- how do you take all the crap out of it?
A file has an amazing capability that no other implement on a multi can really provide: to cut through metal.
The ability to cut metal could be absolutely crucial in various survival scenarios.
I'm very curious about this potential use. I remember about 25 years ago as a kid I tried to saw through some hunk of metal with my Vic Champion's file without much success. It removed much of the small teeth on that file.
What kinds of metal or objects can the LM and Vic files go through well?
I've cut aluminum tubing using the file on my old LM PST and would say it cut it fairly well.
Aluminum is a likely material that you might need to cut in a survival situation:
-aircraft skin
-small boat skin
-pack frame
-tent poleSteel won't cut as easily, but you might well end up in a situation where you'd have no choice but to try cutting steel:
-control cables
-electric winch cable
-padlock haspIf prisoners can file through steel bars to escape, I'd think a decent file should go through a steel cable or padlock hasp - if you have patience to keep at it.
.
-
It would take *hours * to get through a padlock with a file...and in a few *minutes * I could find something to break the lock with, or just "get in" another way:D
The field repairs that ringzero mentioned like sawing through a pack frame or tent pole to make something else are more reasonable uses for a file I think.
-
@Corrugated said:
It would take *hours * to get through a padlock with a file...and in a few *minutes * I could find something to break the lock with, or just "get in" another way:DThe field repairs that ringzero mentioned like sawing through a pack frame or tent pole to make something else are more reasonable uses for a file I think.
Yeah Corrugated, you're right about padlocks.
I thought of that issue right after I posted. Padlock manufacturers brag on their packaging about using extra-hard steel highly resistant to cutting.
Steel cables were a better example. A multi file should cut through a steel cable of reasonable diameter - say a control cable or a winch cable. If you really needed to cut the cable and had the patience to keep at it, I think it would work.
.
-
For the files to cut through steel, it's got to be made of a significantly harder steel!
-
@ultimaonliner said:
For the files to cut through steel, it's got to be made of a significantly harder steel!Files are made of harder steel: they have a higher Rockwell number than blades, screwdrivers, etc.
Generally speaking, making steel harder also makes it more susceptible to breaking under torsional loads, impacts, etc.
That's why manufacturers use a lower Rockwell number steel for the screwdrivers, canopener, etc.
.
-
for me,file is more important than woodsaw.but scissors and screwdriver are most important. :)
-
I use the file once and a while, I prefer the wave file but I carry the wingman more. I want to put a better file on the wingman but have no clue how to get a better file without spending some serious $$$. For now though it's those two.
Sent from my SM-G900V using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login