Knife re-handling project.
-
Me thinks it wasn't an MT.
-
Well what the bloody hell is it

-
A spirit.
-
A crunch
-
I don't wan't Ryan's sausage thanks! >:(
-
looks like it's coming along nice Roadie! it looks like fun too

I am slightly confused (what a surprise huh!) why would you drill the holes
before you glued one slab on? isn't that asking for un-straight/problems?if one slab was glued to the tang first (and set) "then" you drilled your
holes through it (through the tang first), wouldn't they be perfect then?!
me if I'm nuts :D -
@WhichDawg said:
looks like it's coming along nice Roadie! it looks like fun too
I am slightly confused (what a surprise huh!) why would you drill the holes
before you glued one slab on? isn't that asking for un-straight/problems?if one slab was glued to the tang first (and set) "then" you drilled your
holes through it (through the tang first), wouldn't they be perfect then?!
me if I'm nuts :DNot necessarily. The blade is only a couple of mm thick so that would be all the guidance you have for the drill which isn't enough really (unless you have a pillar drill, in which case you wont have any problems!) And once the first hole was done i slipped a pin in it to stop it moving then moved onto the 3rd one and pinned that. The only problem you might have is with the alignment of the front of the slabs. But a liberal application of gaffer tape stopped any movement of that during the drilling process.
Hope that makes sense :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login