LM Charge TTi - mod ideas
-
Glad the pen solution worked for you. Those multipen refills are great.

I've thought about adding the hole for the corkscrew attachment but I think the Charge/Wave handle is quite a bit thinner than the corkscrew attachment point on the Swisstool/Spirit. And there are the blade safety locks inside the handle on the oposite side you could damage/would have to remove in order to drill the hole there.
What Juice parts would you like to use? Not sure about the size of the pivot hole, never had one apart. And keep in mind you can't use too long tools inside the handles as you have to leave space for the pliers to close.
-
@enki_ck said:
Glad the pen solution worked for you. Those multipen refills are great.
I've thought about adding the hole for the corkscrew attachment but I think the Charge/Wave handle is quite a bit thinner than the corkscrew attachment point on the Swisstool/Spirit. And there are the blade safety locks inside the handle on the oposite side you could damage/would have to remove in order to drill the hole there.
mhh ... you might have a point. I've found this , mounted to the charge . Might give this a go sometime.
@enki_ck said:
What Juice parts would you like to use? Not sure about the size of the pivot hole, never had one apart. And keep in mind you can't use too long tools inside the handles as you have to leave space for the pliers to close.I was thinking about the cross screwdriver, but I might actually got for a second large bit driver. A bit useless since I keep all my bits in my pocket in any case, but I can't really think about other useful tools to add. Maybe a LED or USB but I don't think there's enough room.
About the rebar, I just heard (talked to a leatherman vendor here) the Rebar is about 40$ in the US. Is this true, and if so, would somebody be willing to buy me one and send it to Belgium ?
-
Try posting a topic in our Tools needed forum for the Rebar. Maybe one of our US members can help you with reshipping it.
-
Ok, i've bit the bullet and bought a rebar.

So now comes the question to what tools i carry over from the rebar. I'm rather interested in the x screwdriver instead of the small bit driver, will that work ?
Another question. I know normal hex bits can be ground down to fit the LM bit holder, but has anybody tried to make some double sided bits (such as standard LM bits) ?
-
The thickness of the Phillips driver and the small bit driver are different I'm afraid. The small bit driver is the same thickness as the can opener


The large bit driver and the Phillips are the same thickness.
I don't know of anyone that's ground down a double ended bit, it would be a lot of grinding. You know the Leatherman bit extender will take a regular 1/4" bit?
-
@Cupboard said:
The thickness of the Phillips driver and the small bit driver are different I'm afraid. The small bit driver is the same thickness as the can openerThe large bit driver and the Phillips are the same thickness.
Damn ... Guess i'll have to figure something else out.
@Cupboard said:
I don't know of anyone that's ground down a double ended bit, it would be a lot of grinding. You know the Leatherman bit extender will take a regular 1/4" bit?I know, but i would like to avoid lugging around another piece of metal.
-
Sorry :(
You might be able to do a DIY one by grinding a large flat driver?
-
ok guys, My rebar arrived the other day and I went ahead and replaced the plier head :D
Took me half an hour with the help of a couple of multitools i have laying around. Man the rebar's screws are a pain to get out but i succeeded in the end

The next thing i did was replace the charge scissors with the rebar awl. Unfortunately there's two things that don't go as foreseen with this mod.
- The awl is loose when closed -> not a clue how to solve this.
- The charge doesn't close completely. -> Guess i can solve this by removing some material from the top of the awl
Any suggestions ?
-
In order to see which tool (or tools) are causing the fouling issues, open them all up and then close them one by one until you find the culprit(s).
Have you tried tightening the screw up any more? The Rebar awl and the scissors are the same thickness so unless you're missing some washers there shouldn't be a problem.
ISTR someone grinding a bit off the awl but I can't remember who or when. It's pretty easy to grind the LM tools if you're careful. I've used a Dremel fake thing which wasn't great and a bench grinder which was nice and quick and did a good job.
-
I think it was Metro that took a bit off the awl, for the blue nose wave?
My one fitted as is because I took the blade locks out.
Also the placement maybe, it could be sitting on the lock stop tab thing.<a href="http://www.flickr.com/photos/drjohnzoidberg/12374875324/" target="_blank" rel="noopener noreferrer"><img src="http://farm4.staticflickr.com/3727/12374875324_1041100416.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
A colleague of mine had a belt grinder at work, so i took half a mm off the top of the awl and now it fits perfectly. Happy camper now :D
The only thing is the finish is now sanded instead of the normal, shot peened, finish ? Can I get this finish with simple household tools ?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login