Detron's love and rablings of his Victorinox Technologist (Cyber-Yeoman)
-
@ianbalgobin said:
Looks Great!
I'm really digging my own Cyber-Yeoman, and I too didn't like the name. I suppose I'll start calling it the Technologist as well.
The only things I miss are the small blade, and the regular openers layer, I've never tried using the combo tool as a can opener.
it is harder to open a can with the combo tool, but how often is that a task? I also miss the small blade, but it is a give and take to get what you want.
-
If only it had pliers.

-
If only it had pliers.

That's why I keep my Leatherman Skeletool in my pocket too. I like playing with the pliers on my Cyberool 34, but they may be a bit too small.
the Vic pliers are very capable, if working on the right sized items, inside a computer, they are excellent. the Squirt pliers are similar in size, so I am covered there.
I have an XLT, if I put everything into this mod, then I would have another XLT, I chose something simi-small, that I would be willing to carry at all times.
I love the Champion, except it does not have the Cybertool layer, same issue with the SwissChamp.
I love my CT41, but it lacks the mag glass.This was my personal choice for a mod, the only thing I contemplated adding was a newer file, but I was not willing to sacrifice a Champion just for the one tool.
-
That's a cool mod! The only thing I would change is to put a Wenger wrench across from the mag glass because the philips driver is a little redundant. Or maybe a victorinox light except those aren't very good.
-
@Nhoj said:
That's a cool mod! The only thing I would change is to put a Wenger wrench across from the mag glass because the philips driver is a little redundant. Or maybe a victorinox light except those aren't very good.good idea, except a) did not have a Wenger wrench, b) if I did have a SAK with one, that would be really driving the cost of this SAK up.
as far as redundant, I do not think so, the inline phillips is larger and stronger than the bits, so to me it is my my #2 phillips, while the bit driver has smaller phillips drivers. I agree some would skip it, for me, it is appreciated. If I have a large tight screw, then the inline phillips get the task, smaller precision work, bit driver to the rescue
-
That's a cool mod! The only thing I would change is to put a Wenger wrench across from the mag glass because the philips driver is a little redundant. Or maybe a victorinox light except those aren't very good.
good idea, except a) did not have a Wenger wrench, b) if I did have a SAK with one, that would be really driving the cost of this SAK up.
as far as redundant, I do not think so, the inline phillips is larger and stronger than the bits, so to me it is my my #2 phillips, while the bit driver has smaller phillips drivers. I agree some would skip it, for me, it is appreciated. If I have a large tight screw, then the inline phillips get the task, smaller precision work, bit driver to the rescue
Good point, I haven't handled a cybertool so I could see that the bits might be a little small.
-
That's a cool mod! The only thing I would change is to put a Wenger wrench across from the mag glass because the philips driver is a little redundant. Or maybe a victorinox light except those aren't very good.
good idea, except a) did not have a Wenger wrench, b) if I did have a SAK with one, that would be really driving the cost of this SAK up.
as far as redundant, I do not think so, the inline phillips is larger and stronger than the bits, so to me it is my my #2 phillips, while the bit driver has smaller phillips drivers. I agree some would skip it, for me, it is appreciated. If I have a large tight screw, then the inline phillips get the task, smaller precision work, bit driver to the rescue
Good point, I haven't handled a cybertool so I could see that the bits might be a little small.
handle one
go ahead, handle one
might be surprised. Ask @Sawman he finally got one -
That's a cool mod! The only thing I would change is to put a Wenger wrench across from the mag glass because the philips driver is a little redundant. Or maybe a victorinox light except those aren't very good.
good idea, except a) did not have a Wenger wrench, b) if I did have a SAK with one, that would be really driving the cost of this SAK up.
as far as redundant, I do not think so, the inline phillips is larger and stronger than the bits, so to me it is my my #2 phillips, while the bit driver has smaller phillips drivers. I agree some would skip it, for me, it is appreciated. If I have a large tight screw, then the inline phillips get the task, smaller precision work, bit driver to the rescue
Good point, I haven't handled a cybertool so I could see that the bits might be a little small.
handle one
go ahead, handle one
might be surprised. Ask @Sawman he finally got oneI want one but they are lots of $$$ and with the new Delemont collection coming out those are next on my list
-
Awesome moid! GigaHz did a great job.
You should put the small torx bit in the driver when not in use; easier to open than with that flat head :) -
Very nice

-
Love it - great custom and the name is spot on.
Those rods have they been taken from a existing SAK or are they new?
-
I was being slightly facetious with the pliers comment. ::) but seriously this is a nice SAK.
Makes me want to pull apart my 2nd CT34 and my Yeoman-Mechanic and perhaps a Wenger with the wrench and build a bladeless toolbox SAK.
-
-
Why did you opt to keep the inline philips when you added the bit driver? Seems like you could have used/found another tool that would not be a duplicate!
Love the Cyber-Yeoman but just wondered!

-
@sir_mike said:
Why did you opt to keep the inline philips when you added the bit driver? Seems like you could have used/found another tool that would not be a duplicate!Love the Cyber-Yeoman but just wondered!

as far as redundant, I do not think so, the inline phillips is larger and stronger than the bits, so to me it is my my #2 phillips, while the bit driver has smaller phillips drivers. I agree some would skip it, for me, it is appreciated. If I have a large tight screw, then the inline phillips get the task, smaller precision work, bit driver to the rescue
the best analogy I have is I would not drive 16 penny nails with a peen hammer. the bit driver phillips bits may be technically large enough, but I like the in-line phillips for big jobs, like construction screws in wood. the bit driver can easily handle machine screws where the screw is set into a machined hole, but I do not want to trust it on higher torque items.
ALSO it was hard enough for me to send three SAKs to slaughter to get this Technologist made, I could not (nor did I have) another to send. Even if I had had another, I think I would still have kept the inline phillips.
I think many people would have dropped the phillips, and I can see that as a good call, but not for me.
-
Why did you opt to keep the inline philips when you added the bit driver? Seems like you could have used/found another tool that would not be a duplicate!
Love the Cyber-Yeoman but just wondered!

as far as redundant, I do not think so, the inline phillips is larger and stronger than the bits, so to me it is my my #2 phillips, while the bit driver has smaller phillips drivers. I agree some would skip it, for me, it is appreciated. If I have a large tight screw, then the inline phillips get the task, smaller precision work, bit driver to the rescue
the best analogy I have is I would not drive 16 penny nails with a peen hammer. the bit driver phillips bits may be technically large enough, but I like the in-line phillips for big jobs, like construction screws in wood. the bit driver can easily handle machine screws where the screw is set into a machined hole, but I do not want to trust it on higher torque items.
ALSO it was hard enough for me to send three SAKs to slaughter to get this Technologist made, I could not (nor did I have) another to send. Even if I had had another, I think I would still have kept the inline phillips.
I think many people would have dropped the phillips, and I can see that as a good call, but not for me.
Okay, I can see it now that you explained it. It makes sense. Initially I was thinking if it was me, I would probably drop the inline but now, not so much! :D
-
I compared thickness to other SAKs I have. this has the same thickness as my Troubleshooter (which would have been a great name, but was taken)
I put plus scales on my troubleshooter, so the measurement was plus scales against plus scales.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login