Leatherman PST chronology project
-
Oh really? I'll have to check mine out again to make sure I just didn't miss some very faint date codes. Cool PST you got there anyway
Is this your first PST? -
@Monrogue said:
Oh really? I'll have to check mine out again to make sure I just didn't miss some very faint date codes. Cool PST you got there anyway
Is this your first PST?Yes, it is my first ever. in the mid to late 90's I had a few Gerbers here and there, but this is my first PST. My first Leatherman was a Kick in 2008 or so. (Never used) and then I bought a Surge in the Summer. the Surge did it for me, I was hooked. (I still have that Kick, not a bad MT)
-
Oh really? I'll have to check mine out again to make sure I just didn't miss some very faint date codes. Cool PST you got there anyway
Is this your first PST?Yes, it is my first ever. in the mid to late 90's I had a few Gerbers here and there, but this is my first PST. My first Leatherman was a Kick in 2008 or so. (Never used) and then I bought a Surge in the Summer. the Surge did it for me, I was hooked. (I still have that Kick, not a bad MT)
Ah...so do you like it? I find them interesting, and there's just something about the classic, tools on the inside look that I like :D
-
Oh really? I'll have to check mine out again to make sure I just didn't miss some very faint date codes. Cool PST you got there anyway
Is this your first PST?Yes, it is my first ever. in the mid to late 90's I had a few Gerbers here and there, but this is my first PST. My first Leatherman was a Kick in 2008 or so. (Never used) and then I bought a Surge in the Summer. the Surge did it for me, I was hooked. (I still have that Kick, not a bad MT)
Ah...so do you like it? I find them interesting, and there's just something about the classic, tools on the inside look that I like :D
I do like them.
-
Here is my 2nd PST info bought early 1996, as my first PST bought in 1993 was stolen. I actually lost this one once at Edson Range Camp Pendleton, CA in 2000 during the Crucible (one of many). Got it back 2 or 3 cycles later from a Field Hat who remembered seeing my last name on it.
Does your PST have:
• Rivets or knurled screws? Knurled
• Lanyard attachment?
• (Old) small diameter or (new) large diameter plier pivot? Small
• LEATHERMAN alone cast into plier pivot? Or with USA? Or TOOL? LEATHERMAN with USA
• A hard wire cutter notch? No
• Handles stamped with what? (see pictures in next post for examples) LEATHERMAN(R) TOOL US REG TM 1325473 PORTLAND OR
• Inch ruler only, or inch/metric? inch/metric
• Date codes? 1195/1195
• Drop point knife blade or clip point? (saber?) clip point
• Knife blade tang stamped LEATHERMAN alone? Or with USA? Or JAPAN? LEATHERMAN with USA
• Screwdrivers: pivot-in or pivot-out? pivot-in -
Just won a rare PST on fleabay.
From looking at the seller's single photo it is:
Japanese PST
with a (small) lanyard attachment,
no "Pocket Survival Tool" or "Portland OR",
in nice condition (well the handles look OK, it wasn't opened so I won't know about the components until I get it).According to the seller it has
hollow rivets :D and
US PAT 4238862 :D,
with just "leatherman" stamped on the knife tang.So maybe a version 4 but with hollow rivets from v3 ?
-
Nice find!

Sent from my iPhone 5 using Tapatalk
-
Yes that does sound like an unusual combination. Congrats!

-
Greg does it have large font LEATHERMAN on one handle?
-
@David said:
Greg does it have large font LEATHERMAN on one handle?Yep, also "US PAT 4238862", "(R) tool" in smaller font (no "Portland OR"), while the other handle is blank (so no "Pocket Survival Tool", which is why I thought it might be a version 4 even though it has hollow rivets).
Have a look (you'll need to zoom in to see any details):
-
Okay I remember that one now. I have a couple of those if you'd like I can post some pics for you to study and
over while you wait. :) -
Here ya go buddy. These could give you an idea of what you have coming. The only difference is the can opener. The one on the left in pic three has the older left hand cut. I consider these to be transitional models of the riveted PST. :)
-
This one arrived today
:) -
Grandpa PST.

-
-
Nice one David

-
Thank you everyone! I've been after one of these oldies for a while. I pasted on one a couple years ago because it had a name engraved on it.and A dealer won it cheap and when he relisted it it sold for $300+ if I remember correctly. This seller had both pics of the back side. where you couldn't see the etched baled and blank handles except for the Pat#. His BIN price was high enough no one jumped on it. I'm not sure how I came across it as it was not listed as a PST, Tool, or Pocket Survival Tool. It was listed as a Leatherman utility knife. after asking some questions I bought it and hoped they were truthful. They were so now i finally have one. :)
-
@David said:
Thank you everyone! I've been after one of these oldies for a while. I pasted on one a couple years ago because it had a name engraved on it.and A dealer won it cheap and when he relisted it it sold for $300+ if I remember correctly. This seller had both pics of the back side. where you couldn't see the etched baled and blank handles except for the Pat#. His BIN price was high enough no one jumped on it. I'm not sure how I came across it as it was not listed as a PST, Tool, or Pocket Survival Tool. It was listed as a Leatherman utility knife. after asking some questions I bought it and hoped they were truthful. They were so now i finally have one. :)Congratulations !!!!

Some of my best finds have been with listings with odd titles (that reduces the competition). So these "white whales" are out there, you just have to keep looking (and hoping you find them first
). I'll keep looking ...... -
Here's the info on my brand new BO PST:
Rivets or knurled screws? Knurled
• Lanyard attachment? Yes
• (Old) small diameter or (new) large diameter plier pivot? Small
• LEATHERMAN alone cast into plier pivot? Or with USA? Or TOOL? LEATHERMAN with USA
• A hard wire cutter notch? No
• Handles stamped with what? (see pictures in next post for examples) LEATHERMAN(R) TOOL US REG TM 1325473 PORTLAND OR
• Inch ruler only, or inch/metric? inch/metric
• Date codes? 0893/0993
• Drop point knife blade or clip point? (saber?) Saber I think
• Knife blade tang stamped LEATHERMAN alone? Or with USA? Or JAPAN? LEATHERMAN with USA
• Screwdrivers: pivot-in or pivot-out? pivot-in -
Here's the info on my brand new BO PST: (just like Monrogue's)
Rivets or knurled screws? Knurled
• Lanyard attachment? Yes
• (Old) small diameter or (new) large diameter plier pivot? Small
• LEATHERMAN alone cast into plier pivot? Or with USA? Or TOOL? LEATHERMAN with USA
• A hard wire cutter notch? No
• Handles stamped with what? (see pictures in next post for examples) LEATHERMAN(R) TOOL US REG TM 1325473 PORTLAND OR
• Inch ruler only, or inch/metric? inch/metric
• Date codes? 0893/NONE
• Drop point knife blade or clip point? (saber?) Saber I think
• Knife blade tang stamped LEATHERMAN alone? Or with USA? Or JAPAN? LEATHERMAN with USA
• Screwdrivers: pivot-in or pivot-out? pivot-in
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login