Detron's love and rablings of his Victorinox Technologist (Cyber-Yeoman)
-
Why did you opt to keep the inline philips when you added the bit driver? Seems like you could have used/found another tool that would not be a duplicate!
Love the Cyber-Yeoman but just wondered!

as far as redundant, I do not think so, the inline phillips is larger and stronger than the bits, so to me it is my my #2 phillips, while the bit driver has smaller phillips drivers. I agree some would skip it, for me, it is appreciated. If I have a large tight screw, then the inline phillips get the task, smaller precision work, bit driver to the rescue
the best analogy I have is I would not drive 16 penny nails with a peen hammer. the bit driver phillips bits may be technically large enough, but I like the in-line phillips for big jobs, like construction screws in wood. the bit driver can easily handle machine screws where the screw is set into a machined hole, but I do not want to trust it on higher torque items.
ALSO it was hard enough for me to send three SAKs to slaughter to get this Technologist made, I could not (nor did I have) another to send. Even if I had had another, I think I would still have kept the inline phillips.
I think many people would have dropped the phillips, and I can see that as a good call, but not for me.
Okay, I can see it now that you explained it. It makes sense. Initially I was thinking if it was me, I would probably drop the inline but now, not so much! :D
-
I compared thickness to other SAKs I have. this has the same thickness as my Troubleshooter (which would have been a great name, but was taken)
I put plus scales on my troubleshooter, so the measurement was plus scales against plus scales.
-
I like the inline driver very much so that would be a keeper for me too. I think the bit driver being 1/8 bits? serves for exactly what you say, more precise usage. I too would go with 1 blade and add a plier layer if it were my custom. I keep looking at my Swisschamp and ask myself what would I strip away and add??? I like your custom very much especially in the line of work you are in.
-
@Aloha007 said:
I like the inline driver very much so that would be a keeper for me too. I think the bit driver being 1/8 bits? serves for exactly what you say, more precise usage. I too would go with 1 blade and add a plier layer if it were my custom. I keep looking at my Swisschamp and ask myself what would I strip away and add??? I like your custom very much especially in the line of work you are in.you hit on a good point, each person's custom is just that THEIR CUSTOM, custom to their needs or desires.
I would not mind adding pliers or a file to mine, but then it is huge again. and there is always a Charge on my hip, and a squirt on my keys.
-
That's what I am thinking! If you get too many tools on it, you might as well use a MT. I would keep it to 3-4 layers max, I think! :D
-
@sir_mike said:
That's what I am thinking! If you get too many tools on it, you might as well use a MT. I would keep it to 3-4 layers max, I think! :Dmy perfect setup is a MT a SAK (84,85,91, or 93 mm) and a keychain tool.
I would rather have a great complimentary pair (trio if you count the key chain tool) than one "do it all" tool, so to me personally, having pliers on my SAK is not as important as it is to others. the same is true of a file.
with that said, my technologist is a medium size that is a balance of size and capabilities tailored for my desires and needs.
-
one of the main reasons I prefer a pair is very simple.
have you ever dropped a tool of any sort over the side of the boat, or into any place where you cannot get it back?
well, I have, the navy showed me how irretrievable an item can become in about 2 seconds. though I might never have this problem again, the thought haunts me. I put a death grip on my car keys near sewer grates, and I think that action stems from my navy days
-
I sort of see the point of people knocking the inline philips driver. I keep switching between my Technologist/Cyber-Yeoman and my CT34 every couple of days.
Here's my reasons.
The CyberTool 34 is better because:-
Has the Small Blade
-
Has Pliers
The Technologist/Cyber-Yeoman is better because:
-
Has the Magnifying Glass
-
Is Thinner
I may need to put together some older SAK's and start planning another mod.
-
-
@ianbalgobin said:
I sort of see the point of people knocking the inline philips driver. I keep switching between my Technologist/Cyber-Yeoman and my CT34 every couple of days.
Here's my reasons.
The CyberTool 34 is better because:- Has the Small Blade
- Has Pliers
The Technologist/Cyber-Yeoman is better because:
- Has the Magnifying Glass
- Is Thinner
I may need to put together some older SAK's and start planning another mod.
I have a CT41 and a CT34, but I always want a mag glass (I would love a cybertool lite for this reason)
I have a swisschamp, champion, explorer, yeoman - but these all are missing the bit driver
I have a Swisschamp XLT has the things I need, but is huge!
there are four main things I wanted in this mod
[list type=decimal]
-
mag glass
-
bit driver
-
knife
-
scissors
the inline phillips was not a major need, but a great tool to me to be a filler.
-
I sort of see the point of people knocking the inline philips driver. I keep switching between my Technologist/Cyber-Yeoman and my CT34 every couple of days.
Here's my reasons.
The CyberTool 34 is better because:- Has the Small Blade
- Has Pliers
The Technologist/Cyber-Yeoman is better because:
- Has the Magnifying Glass
- Is Thinner
I may need to put together some older SAK's and start planning another mod.
I have a CT41 and a CT34, but I always want a mag glass (I would love a cybertool lite for this reason)
I have a swisschamp, champion, explorer, yeoman - but these all are missing the bit driver
I have a Swisschamp XLT has the things I need, but is huge!
there are four main things I wanted in this mod
[list type=decimal]
- mag glass
- bit driver
- knife
- scissors
the inline phillips was not a major need, but a great tool to me to be a filler.
It seems great minds think alike, and fools seldom differ. That's pretty much the exact list of things I want in my ultimate SAK.
I've always seen the Magnifying Glass paired with the Inline Philips driver, and since the flashlight kinda sucks, I figure this is the best pairing.
As I may have mentioned before, I do miss the dedicated openers layer, and the small blade. And as much as I love having the Mag glass on it, I don't think it'll be up to the task of emergency firestarting. For that I keep 2 Fresnel lenses in my wallet. -
Very cool custom Detron
They can become addicting though, because if you're anything like me, your mind may analyze all the minutia of each tool and what you think would work best, even if you've already got the custom you thought would be best. This is my curse ;) Even though I love my Yeochamp, I've found I have gone back to an Explorer, and am still trying to think of what my "perfect" 91mm would be. It never ends :ahhh And I have this place to thank for that 
Anyway, glad you got a custom, and I hope you enjoy it

-
@detron said:
If you have a name that you think is better, please let me know, I might like it even more.


So, I knew what I wanted in a SAK, and I finally wanted it bad enough to sacrifice some good SAKs for one Great one.GigaHz did a great job, and I love this SAK!!
Great thread
great mod 
Cyber-Detroman, Hackingman ...
:D -
If you have a name that you think is better, please let me know, I might like it even more.


So, I knew what I wanted in a SAK, and I finally wanted it bad enough to sacrifice some good SAKs for one Great one.GigaHz did a great job, and I love this SAK!!
Great thread
great mod 
Cyber-Detroman, Hackingman ...
:Dha ha that was a good one
-
If you have a name that you think is better, please let me know, I might like it even more.
So, I knew what I wanted in a SAK, and I finally wanted it bad enough to sacrifice some good SAKs for one Great one.GigaHz did a great job, and I love this SAK!!
Great thread
great mod 
Cyber-Detroman, Hackingman ...
:Dha ha that was a good one
Very well, so here are Terms and Conditions:
As with contract the registered trademark
©yber-Detroman ... and all rights are transferred to Detron.This Agreement shall be governed in all respects by the laws of the


-
If you have a name that you think is better, please let me know, I might like it even more.
So, I knew what I wanted in a SAK, and I finally wanted it bad enough to sacrifice some good SAKs for one Great one.GigaHz did a great job, and I love this SAK!!
Great thread
great mod 
Cyber-Detroman, Hackingman ...
:Dha ha that was a good one
Very well, so here are Terms and Conditions:
As with contract the registered trademark
©yber-Detroman ... and all rights are transferred to Detron.This Agreement shall be governed in all respects by the laws of the


"You are incompatible." "You will be deleted." "You will become like us."
-
[quote author=detron link=topic=50550.msg850162#msg850162 date=1393108042]
If you have a name that you think is better, please let me know, I might like it even more.
So, I knew what I wanted in a SAK, and I finally wanted it bad enough to sacrifice some good SAKs for one Great one.GigaHz did a great job, and I love this SAK!!
Great thread
great mod 
Cyber-Detroman, Hackingman ...
:Dha ha that was a good one
Very well, so here are Terms and Conditions:
As with contract the registered trademark
©yber-Detroman ... and all rights are transferred to Detron.This Agreement shall be governed in all respects by the laws of the


"You are incompatible." "You will be deleted." "You will become like us."
[/quote]
:o



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login