Blunt nose MUT?
-
I second what Breezy said, they also have a tendency to break and send bits flying if you expect too much of them. The metal used for the pliers is most likely too tough for them to be a reasonable choice too.
-
DO IT
;) Like everyone else, I want to see pics man :D -
OK, jeez, don't poke so hard!!

I should be able to do this tonight, and yes, I will try extra hard to resist the urge to just keep going, and stop and take pics.
-
I'm a bit worried about heat too. Maybe I'll try the hacksaw, and do some profiling with the grinder. Ahhh, we'll see tonight what I choose to do the job. :D
-
@derekmac said:
I'm a bit worried about heat too. Maybe I'll try the hacksaw, and do some profiling with the grinder. Ahhh, we'll see tonight what I choose to do the job. :DCould clamp some heavy metal over both sides to act as a heat sink. If it gets hot - stop. Unclamp the heat sinks till all metal cools down and try again.
Flowing water over it might not be a good idea, oil would be better. Have a lapidary friend perchance? They might have a setup you could borrow or use.
-
Well since I'm impatient, I just went ahead and used my bench grinder. I had a cup of water next to me, and only did a few swipes on the grinder, then would dip. I worked at it slowly, and I don't think it got too hot. Anyways, here are some pics of the process.
A quick before/after pic:
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/beforeaftercopy_zps40701255.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/beforeaftercopy_zps40701255.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>The rest:
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/98CDC2B1-FA6B-4645-846B-EC20C6539515_zpsv6anadcj.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/98CDC2B1-FA6B-4645-846B-EC20C6539515_zpsv6anadcj.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/E821CF80-6738-453B-8842-ACBD5D60A948_zpshod9crsx.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/E821CF80-6738-453B-8842-ACBD5D60A948_zpshod9crsx.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/71EC97A7-C400-4E4C-88CA-A762AD070796_zpsmshggbpj.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/71EC97A7-C400-4E4C-88CA-A762AD070796_zpsmshggbpj.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/B7A3CCA1-E7CC-47A2-82A1-F54C55AAEFF5_zpsqvrmxcqx.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/B7A3CCA1-E7CC-47A2-82A1-F54C55AAEFF5_zpsqvrmxcqx.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/7B13714B-514E-469A-9302-7D81006A7A08_zps7z3i1zuo.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/7B13714B-514E-469A-9302-7D81006A7A08_zps7z3i1zuo.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/F9E19C18-16D3-47C5-938A-5079175CCC92_zpsd2ksyxov.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/F9E19C18-16D3-47C5-938A-5079175CCC92_zpsd2ksyxov.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/86FC016B-BAE3-412E-A103-BDD1CC1BBEF6_zpsg19twtyc.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/86FC016B-BAE3-412E-A103-BDD1CC1BBEF6_zpsg19twtyc.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/5D37F1E9-1BC7-43F2-95C7-703B07E0A8D0_zpstnxtjz0r.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/5D37F1E9-1BC7-43F2-95C7-703B07E0A8D0_zpstnxtjz0r.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/3A706735-D89A-451B-B825-F9D5E92FB6B6_zpsecewwacd.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/3A706735-D89A-451B-B825-F9D5E92FB6B6_zpsecewwacd.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>So there we go, I just ground an expensive Leatherman all because of how much I love my Gerber MP600 bluntnose! :ahhh
-
A few shots next to my MP600.
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/7BAAF02D-7662-46D9-91A1-BEAA27825A64_zpssvtzsygm.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/7BAAF02D-7662-46D9-91A1-BEAA27825A64_zpssvtzsygm.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/541DB089-0DEC-4C0E-A06B-F9E2C8425FD7_zps8denbuvn.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/541DB089-0DEC-4C0E-A06B-F9E2C8425FD7_zps8denbuvn.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/9683E14B-A022-4085-8917-AA0863B3F57F_zpsa41icu3n.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/9683E14B-A022-4085-8917-AA0863B3F57F_zpsa41icu3n.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
I think it looks sweet and more so because it suits your needs.
good for you for getting after it and doing it. -
Looking good! Nice work!
that's us mobile
-
Good for you man! I like the look of that very much.

You have to get metal pretty frigging hot to start effecting the temper so as long as you grind for couple seconds, dip in water and repeat till done, its really not a concern at all.
I know of knifemakers who heat treat rectangles of blade steel, and THEN grind them into blades with zero effect on the heat treating as long as they are kept cool by occasional water dunking.
-
Thanks guys!
I think it makes it look more like a heavy duty tool, and not medium duty with the needle nose pliers.Good to hear that I really couldn't have screwed up the temper! I did dunk quite often, and never really even heard a sizzle when doing it.
I'm going to grind the punch thingy down to a point too as I've yet to find a use for that. I figure I might find something to use it on if it's nice and pointy.
-
Nice work Derek
Are you going to BO the tip? -
That's the worst part about grinding down a BO tool, the plain metal you're left with.
Not 100% sure what I'm going to do with it yet.
Sent from my iPhone 5 using Tapatalk
-
Good job!
Pic of the whole tool so we can see the overall effect on the profile of the tool? Pretty please
-
No Problem.
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/7000944C-D49E-4840-8D5B-2BE6CEC94661_zpsyz6ehf91.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/7000944C-D49E-4840-8D5B-2BE6CEC94661_zpsyz6ehf91.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
A not great reference shot.
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/null_zpsc5419606.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/null_zpsc5419606.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Sharpened the punch to a point also.
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Knives/24ED6FEE-DB4C-4C18-8504-06FB932A6166_zpsa9nnixpa.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Knives/24ED6FEE-DB4C-4C18-8504-06FB932A6166_zpsa9nnixpa.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

