What Did You Use Your Multitool For Today?
-
The powers that be at work have decided that it's time to repaint the store. Now, let me make one thing clear - I sell paint, but I HATE painting.
There's a reason I'm on the other side of the counter...... The past several days, my MP600, either the Pro Scout or my BO US Army one, has been used to take down and reinstall fixtures, open plastic joint compound buckets, pull a few nails out of walls, remove screws, etc. The file on the Pro Scout even got used to take down a nasty burr on some metal corner bead. The tools are being used all day, and doing their jobs without complaint.
Which is more than can be said for me...... ::)I say drop an M-80 into a can of paint, and call it a day!
Would make life easier.....
-
I used the blade on my Sidekick-X to open a box containing our new couch, and the pliers to remove several heavy duty staples from the box as well. Also used the blade on my OHMasterRT to open up the box containing our new recliner and cut down the cardboard a bit.
-
Today was a busy day for the Surge and my ratchet mod for the bit holder. I tried out the ratchet on a long wood screw for a outdoor staircase then for a longish screw for the railing. The ratchet worked out very good and no trip to truck for tools so win. I used the flat driver to pry loose a wood strip on a gate and the wood saw to cut a new piece to fit. Pliers pulled out old finish nails and bent a piece of metal on garage door that was sharp. I used the main blade to cut old hose female end off to repair, driver was used to secure hose clamp. Sorry no pictures I was in the moment trying to get done.
-
Used my ReCharge to break down boxes and tighten a few loose screws while cleaning up the workshop. Then used the blade to open a box of chocolates to share with guests after dinner.
-
I used the main blade on my Climber to open a parcel from Oakley containing my new Kitchen Sink pack :D
-
I used the P-38 on my keychain to scrape the old registration sticker off my truck's windshield.
-
I used my st300 to smash myself in the face

so if you are wondering what has the higher Rc human teeth or leatherman frame steel leatherman wins and I got a 75.00 co pay to prove it.
again

-
-
Spirit to disassemble an umbrella. My hands are getting really clammy again so it's looks like I'll have to add a bit of grip tape on it
-
ReCharge unjammed the power stapler at work for the umpteenth time yesterday
. I don't know why we don't just get a new one. For the number of times it jams and the length of time it stays jammed... -
Used my blunt nose MUT to hammer and remove more staples from some wood at work.
-
I used the mini screwdriver on my Wave to tighten my glasses. It works perfectly!
-
Used the MP600 Pro Scout to remove a small piece of my plastic iPhone case that had broken. Knife to cut the piece away. File to clean up the corners so it wouldn't snag on my pocket.
-
I used my SAK and toolkit to remove a rusted out mailbox from my house and then move one screw over to accomodate the new box.
-
Not a use that gets reported here often, I'm sure...
I pulled a bra out of the laundry, and one of the hooks was bent. So I grabbed the nearest MT, which happened to be a SOG PPP, and bent the hook back into place. The very fine needle nose of the Pocket Powerplier worked great for such precision work.
Also... JAfromMn... Ouch. Crap. That sucks. :'(
-
Gave my new BO MP600 Bluntnose a bit of a workout today.
Pliers to tighten up parts on my snowblower before cleaning out the driveway.
Screwdriver to adjust the blade setting on my circular saw so I could cut some material for shelves.
Serrated knife to cut a new mat for the front entryway and to cut plastic edging for the shelves.
File to clean up the edges on the shelf edging and fit it flush to the shelf edge.
Can opener to jimmy open the lid on a "non-reusable" soap container so that it could be refilled. (With a bit of ingenuity and some tools, nothing is "un" or "non" anything :D).
Plain knife to trim the plastic tabs that made the soap container lid so difficult to remove (It now pops of with a simple twist).
Not a bad day for a tool that's less than 48hrs out of the package
. -
The other day at work I forgot my tape measure so I used my LM Blast to measure out for toe board on a few small scaffolds.
It worked out very well. -
Yesterday I bought an entertainment center at GoodWill for $9.99. it was about 1" to big to go into the back of my Small SUV, I used my Charge TTi to take it appart in the parking lot

-
@Toolslinger said:
Can opener to jimmy open the lid on a "non-reusable" soap container so that it could be refilled. (With a bit of ingenuity and some tools, nothing is "un" or "non" anything :D).One for the quotes file!

-
Last night I used my Rebar to remove a built in cook top at my moms house, I was gonna use it to put the new one in but it didnt happen that way. Ever heard measure twice, im guessing that never happened since the new one was completely the wrong size. So I used my rebar to reinstall the old cook top while waiting on a new one.
Sent from my SCH-I605 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Next time just ask, it will be cheaper and less painful