What did you use your Leatherman for today?
-
Another good day for the ReCharge yesterday.
Blade: Open some snacks and break down some boxes.
Saw: Clean up some sub-floor edges to make them fit better.
Screwdrivers: Removed door hinges for dissasembly, cleaning and reassembly. Reattached said hinges. Tightening the screws holding on the legs of the coffee table.
Pliers: Helped me feed some nylon webbing through a highchair.Not too shabby. Definitely glad to have it on me.
-
@Toolslinger said:
Another good day for the ReCharge yesterday.Blade: Open some snacks and break down some boxes.
Saw: Clean up some sub-floor edges to make them fit better.
Screwdrivers: Removed door hinges for dissasembly, cleaning and reassembly. Reattached said hinges. Tightening the screws holding on the legs of the coffee table.
Pliers: Helped me feed some nylon webbing through a highchair.Not too shabby. Definitely glad to have it on me.
Sounds like a good, busy day for the ReCharge

-
Someone keeps messing with this Spigot and my "key" wont work so Surge large flat driver to the rescue.

-
Another good day for the ReCharge yesterday.
Blade: Open some snacks and break down some boxes.
Saw: Clean up some sub-floor edges to make them fit better.
Screwdrivers: Removed door hinges for dissasembly, cleaning and reassembly. Reattached said hinges. Tightening the screws holding on the legs of the coffee table.
Pliers: Helped me feed some nylon webbing through a highchair.Not too shabby. Definitely glad to have it on me.
Sounds like a good, busy day for the ReCharge

Yup. Made for a good
day. Then there's today where it didn't even come out of it's sheath... -
Another good day for the ReCharge yesterday.
Blade: Open some snacks and break down some boxes.
Saw: Clean up some sub-floor edges to make them fit better.
Screwdrivers: Removed door hinges for dissasembly, cleaning and reassembly. Reattached said hinges. Tightening the screws holding on the legs of the coffee table.
Pliers: Helped me feed some nylon webbing through a highchair.Not too shabby. Definitely glad to have it on me.
Sounds like a good, busy day for the ReCharge

Yup. Made for a good
day. Then there's today where it didn't even come out of it's sheath...Probably needed a day of rest ;)
-
I used my MUT to hammer some staples out of wood, and then pull them the rest of the way out. Hammer = AWESOME!
-
today i bought a micro sd cart.....

for my smartphone....

i wanted to install it in the store...

so i started to pull the blister to get the sd-cart out...

used my teeth....

nop! did not open!...so i took my multitool and that opened it in 3 seconds!

but......

tiny detail...when you take out a leatherman MUT in the mediamarkt ( big electonics shop in holland)
they'll be looking pretty shocked!!


-
@screwloose said:
today i bought a micro sd cart.....

for my smartphone....

i wanted to install it in the store...

so i started to pull the blister to get the sd-cart out...

used my teeth....

nop! did not open!...so i took my multitool and that opened it in 3 seconds!

but......

tiny detail...when you take out a leatherman MUT in the mediamarkt ( big electonics shop in holland)
they'll be looking pretty shocked!!


What tool of the MUT did you use for the clamshell? I would have thought a Wingman more suiting for the task.
-
what do you think?
the knife off course!
Why would they bother if i used a sisscors?.. -
Used my Blast last night for:
-
Pulling apart one of my swiss army knives. Had to file some pins down and pull them through.
-
Changing out a blown tail light bulb on the hilux.
-
Swapping my 3-9x Leupold scope on my Remington 700 with my 6-20 Weaver for an upcoming (post rut) hunting trip where I need a bit more precision (bush hunting vs longer range). This'd all be unnecessary if I just bought another 7mm08 :P
-
Trying (and miserably failing) to make a fire bow and light a fire with it… Les Stroud makes it look easy!
So it good a good workout yesterday. I'm starting to appreciate the one hand open functionality of my Wingman and Blast a lot more lately though (still not enough to swap out the Blast for EDC).
-
-
I used the awl (carbon scraper) on my MUT to start holes in the lid of a crate, then used the Philips bit to drive a couple of screws in.
-
I used the awl (carbon scraper) on my MUT to start holes in the lid of a crate, then used the Philips bit to drive a couple of screws in.
I've wondered how well the scraper works as an awl. How did it hold up to the job?
I used it to go through 1/4" plywood, and it had no problems going through it, and it looks to be in the same condition as it was before doing that.

Sent from my iPhone 5 using Tapatalk
-
I used the awl (carbon scraper) on my MUT to start holes in the lid of a crate, then used the Philips bit to drive a couple of screws in.
I've wondered how well the scraper works as an awl. How did it hold up to the job?
I used it to go through 1/4" plywood, and it had no problems going through it, and it looks to be in the same condition as it was before doing that.

Sent from my iPhone 5 using Tapatalk
That is AWESOME!!! I may just have a use for a MUT given this info :D
-
I used the awl (carbon scraper) on my MUT to start holes in the lid of a crate, then used the Philips bit to drive a couple of screws in.
I've wondered how well the scraper works as an awl. How did it hold up to the job?
I used it to go through 1/4" plywood, and it had no problems going through it, and it looks to be in the same condition as it was before doing that.

Sent from my iPhone 5 using Tapatalk
That is AWESOME!!! I may just have a use for a MUT given this info :D
I'm not sure how it would fair doing this often, or if you used it in hardwood though. I guess it should be ok as it should be harder than wood??
Good thing about it is, it's replaceable if it does get screwed up. -
Rebar to slice up a cord tied to a tree. Been there for 2 years and the trunk had little more room to grow.
The serrated knife ripped it apart.
Sent from my GT-S5660 using Tapatalk 2
-
The ST300 got a good workout installing some more sarking (reflective foil laminate) on my shed.
-
Surge plus a Tshank Wood saw was used to rough cut Pine Derby Car for a Scout.

-
Joint effort bringing the Bearcat back to life in the modern world with the Kick and Fieldmaster. It has all the crystals but the crystal frequencies are from the late 70's. its gonna take some effort to get 6 more channels of useful scanning out of this old thing. All I get on it is weather and a cab company as of now. Its clean and working properly now so im thrilled.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login