What's your latest SAK?
-
That one gets charged by the pound of cool...so...Millions!
-
@sticktodrum said:
That one gets charged by the pound of cool...so...Millions!If you have to ask you can't afford it probably... :P
-
Syph007, where did the combo tool come from?
-
-
Nice one Syph, your work never fails to impress.

Wondering if that KR attachment is stainless? Looks nice! :)
-
Were there any modifications needed to the tang of the Day Packer, is it the same as the standard tang? What's the pivot size of it?
Very cool looking mod, one to remember for sure.

-
@enki_ck said:
Were there any modifications needed to the tang of the Day Packer, is it the same as the standard tang? What's the pivot size of it?Very cool looking mod, one to remember for sure.

Pivot size is 3.5mm. I left the tang stock but needed to grind the spring end a bit to have the nail nick accessible. Left as it was the blade would be buried too deep.
-
Were there any modifications needed to the tang of the Day Packer, is it the same as the standard tang? What's the pivot size of it?
Very cool looking mod, one to remember for sure.

**Pivot size is 3.5mm. **I left the tang stock but needed to grind the spring end a bit to have the nail nick accessible. Left as it was the blade would be buried too deep.
So I'm guessing you filled the pivot hole with brass and re-drilled, right? Or it that already the size of the screws you're using? I was never too good with those imperial measurements fro screws. I live in a metric world. ;)
-
Were there any modifications needed to the tang of the Day Packer, is it the same as the standard tang? What's the pivot size of it?
Very cool looking mod, one to remember for sure.

**Pivot size is 3.5mm. **I left the tang stock but needed to grind the spring end a bit to have the nail nick accessible. Left as it was the blade would be buried too deep.
So I'm guessing you filled the pivot hole with brass and re-drilled, right? Or it that already the size of the screws you're using? I was never too good with those imperial measurements fro screws. I live in a metric world. ;)
Canada is stuck firmly using both measurements. The construction and tool industries are all imperial, but all road signage and units for items in packaging are all metric. For machining I for sure think in imperial, thats how most businesses operate here, and for sure in the US.
The hole was so very little over size a 3.2 mm pivot it was fine with nothing added. No play at all when assembled so I left it as is.
-
Don't see a Spartan Lite as an ad knife very often (don't see one very often period). Green is also uncommon. So couldn't resist.
-
Red Huntsman. Yellow Evo 16 on the way. Due tomorrow.
Sent from my SCH-I605 using Tapatalk
-
Here's one that I think is pretty safe to say will be a one of a kind. Copper alox with red liners, with a clip point blade from a day packer.



Would you like to swap it for my new in the blister ...


Oh that wouldnt be fair at all, yours is still brand new in package and this one is open box! :D
This was a commissioned piece and is already en route to the UK.

-
Here's one that I think is pretty safe to say will be a one of a kind. Copper alox with red liners, with a clip point blade from a day packer.


Would you like to swap it for my new in the blister ...

Oh that wouldnt be fair at all, yours is still brand new in package and this one is open box! :D
This was a commissioned piece and is already en route to the UK.

I too initially thought that I was too generous,

but we all have to admit that the master of your kind fully deserves such generosity. :DI feel that such a switch will not work neither in UK.
Looks like I'll have to make a commission too.
The problem with commissioning, among other things, is the fact that it's hard to decide about perfect layout, and even without the hook
:D , but when I do, and I will soon or later, you'll be the first to know. :D 
-
My first custom courtesy of Syph007.


And an Old Pioneer with almost no wear on the scales and brass liners. :D

-
Those are a couple of nice ones SAKMikey

-
Target Alox. I forget who posted that there were Alox Cadets at Target, my apologies. Thanks for the info. I picked up one of the two on the rack. A nice change not having a SAK arrive in the mail. Fair selection at the Latham Target. Climber, Tinker, Classic, Huntsman and Cadet. Gerber BG stuff and a few blue Dime's. No LM anything. This MT sickness has set in deep.



-
I didn't see any Cadets at my Target last week. :( They had the usual Huntsman, Climber, Tinker, Camper, and Classic. Target has the best SAK selection of any chain around here. I'll look again next time I'm there, my three Cadets could use some more company. ;)
-

A pioneer. Giving a different view.
Forced patina new liner and spacer.
Enjoy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login