Little Boy and Fat Man
-
Fat Man hungers
I've been feeding him all these little nails but hasn't been chewing his food and always spits them out.

he's needs to chew up something. The cutters are just screaming to get some more use.
I also removed/replaced a toilet, heater vent, light switch covers and used him to change saw blades when I couldn't find a tool in my mess.
its almost Friday:)
I'm back to carrying a rebar tonight. A Ss one this time. Its stiffer than my last rebar but I'll break it in

-
The metal saw got its first use today.
I had to cut two bolts holding a toilet down so I could install the bolt covers.
I was impressed how good it worked.

-
Is it a saw or a file?
I know on SAK they call it a metal saw, but not LM. -
On the wave, charge and surge its both. Not sure about the 300 or rebar.
that's us mobile
-
@ducttapetech said:
On the wave, charge and surge its both. Not sure about the 300 or rebar.that's us mobile
I believe the underside of the file on the ST300 and Rebar is the metal saw.
-
I know what it is. See below:
A 420HC stainless steel tool with a crisscross pattern that forms a rough surface for the user to file or smooth both wood and metal surfaces. The file pattern on Leatherman files is extended to the end of the file as well as down the side to give a file stoke and/or a more precise file edge.
Does not advert it being use as a saw. So if you failed to saw with it, you can not blame they.
Metal Saw
-
Its both. File and saw.
I need to do something similar with my swisschamps metal saw/file to see the difference
-
The rebar got broken in tonight replacing a light switch in my hallway.
one of those honey do jobs I never remember to do.
well tonight I did. It was a easy job the rebar handled flawlessly.
first the old one had to come out

then putting it back together


let there be light
edit
I forgot to mention that all the pics I took tonight were lit by my maratac rev 3 aa
the hardest part of the job was trying to hold the light, rebar and try get a decent pic with the cellphone. I needed 3 hands
-
Scared me for a second, I read it quickly and thought it said that you broke the Rebar :ahhh. Almost had a mini-heart attack

-
@Higgins617 said:
Scared me for a second, I read it quickly and thought it said that you broke the Rebar :ahhh. Almost had a mini-heart attack
you and me both
-
Glad to see a Little Boy back in action!

-
I'm doing a few odd jobs today. I don't really want to start any projects on a Friday.
so I'm tuning chainsaws , clean the shop and sharpening tools.
I'm gonna be ready for summer when /if it ever gets here.
here is the fat man helping me change blades in my utility knife . I had to do a little trimming to make a new gasket fit in one of the saws and my utility knife was beyond dull.

-
The Gadget also seen a little use cutting the edges off a few peal and stick floor tiles.
Apparently I was picky this morning when I looked at the floor I put down so I replaced a few tiles with some that were cut better.
the tiles were not easy to cut but it worked just as well as the huge vinyl siding scissors I was using.
you can also see in my last pic that they fit great in the side pocket of my skinith.
what a handy little tool.
-
Realization
If I had a choice between a st300 or Swisstool for the rest of my life I'd pick the st300
its a stronger tool.
I've broken and bent tools on Swisstools I have yet to bend my st300's doing the same stuff.
I would have never thought I'd say that.
-
@JAfromMn said:
I'm doing a few odd jobs today. I don't really want to start any projects on a Friday.so I'm tuning chainsaws , clean the shop and sharpening tools.
I'm gonna be ready for summer when /if it ever gets here.
here is the fat man helping me change blades in my utility knife . I had to do a little trimming to make a new gasket fit in one of the saws and my utility knife was beyond dull.

You really should use a coin for that.
-
I'm doing a few odd jobs today. I don't really want to start any projects on a Friday.
so I'm tuning chainsaws , clean the shop and sharpening tools.
I'm gonna be ready for summer when /if it ever gets here.
here is the fat man helping me change blades in my utility knife . I had to do a little trimming to make a new gasket fit in one of the saws and my utility knife was beyond dull.

You really should use a coin for that.
You know me Lam
I never have money
I just have tools.

-
If I had a choice between a st300 or Swisstool for the rest of my life I'd pick the st300
its a stronger tool.
I've broken and bent tools on Swisstools I have yet to bend my st300's doing the same stuff.
I would have never thought I'd say that.
Interesting. It's funny because Swisstools are seen as one of the best of the best here (I can't say for myself on either tool involved). The fact that you thought you'd never claim the ST300 to be your preferred MT further confirms that. You still prefer it even though the Swisstool has all the tools on the outside? I know that's a big selling point for them, but I guess that's not as important as durability with hard use

-
outside accessible features only go so far, at the end we all want a tool that can get the job done.
I personally found myself able to deploy the tool I need quicker on ST300 than SwissTool. -
Realization
If I had a choice between a st300 or Swisstool for the rest of my life I'd pick the st300
its a stronger tool.
I've broken and bent tools on Swisstools I have yet to bend my st300's doing the same stuff.
I would have never thought I'd say that.
Interesting. It's funny because Swisstools are seen as one of the best of the best here (I can't say for myself on either tool involved). The fact that you thought you'd never claim the ST300 to be your preferred MT further confirms that. You still prefer it even though the Swisstool has all the tools on the outside? I know that's a big selling point for them, but I guess that's not as important as durability with hard use

I've had 1x Swisstool and 2x Spirits let me down with bent/broken implements and damaged pliers (the reason I now prefer replaceable cutters on all my MTs). I've never managed to break any of my Leatherman's in similar usage.
Just my experience: Outside accessible is nice, but with practice and familiarity with the tool, you get to know how to get to what you need quickly and I've never found it to be a deal-breaker or much of a hassle.
Of course everyone's mileage may vary
. -
I agree with what Toolslinger said.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login