Show off your Sak mod's!
-
Antiquing stock liners and spacer for my solid copper scales.

Sent from my iPhone using Tapatalk
-
No mods today, just a bit of prep for the next one:

Used the machine tools at work to make a clamp block for 2.2, 2.5 and 3 mm pins, cut a sheet of ABS to support the knives (I'll drill the holes to clear the rivets when I get home), turned a centre punch from a steel dowel and found some 2 mm dowels to use as pin punches. Also ordered some 2.2 and 2.5 mm brass rod and I'll pick up a smaller ball pein hammer over the weekend.

-
Did a little more work on the Classic I rescaled...rounded off the edges and oiled the wood.

-
That's gorgeous! What type of wood is it?
I like the way your knots look too - do you do anything special to achieve that level of neatness or is it practice practice practice?
-
Cheers Man :salute:
I'm not sure what the wood is :think: it's from an old incense burner, some kind of hard wood I think...smells amazing after all it's years as an incense burner :D
The knot is the only one I'm any good at, I guess it is practice but just keeping it tight as you tie helps and once its tied you can tighten things up a bit with a few twists ;)The knot is a Hangmans noose but Chris Reeve use's it on his knives and calls it the Reeve Coil Knot ::)
-
@Dr Gonzo said:
Cheers Man :salute:
I'm not sure what the wood is :think: it's from an old incense burner, some kind of hard wood I think...smells amazing after all it's years as an incense burner :D
The knot is the only one I'm any good at, I guess it is practice but just keeping it tight as you tie helps and once its tied you can tighten things up a bit with a few twists ;)The knot is a Hangmans noose but Chris Reeve use's it on his knives and calls it the Reeve Coil Knot ::)
Thanks! I'm familiar with the knot but mine never look as neat as yours so I'll try your tip.
Where do you get your leather from? I have some rounded cord but it's really REALLY stiff and takes a lot of bending before it's malleable enough to be useful.
-
I got it from eBay, I have used leather lace from a cobblers that is square and quite thick, I like making lanyards from that but it's more expensive ::)
Here's one on a Farmer...

Link for eBay Leather Lace...
http://www.ebay.co.uk/itm/100-Real-Round-Leather-Cord-1-5-or-2MM-String-Lace-Thong-Jewellery-HQ-/151184697716?pt=UK_Crafts_JewelleryMaking_GL&var=&hash=item23334f6974 -
@Dr Gonzo said:
I got it from eBay, I have used leather lace from a cobblers that is square and quite thick, I like making lanyards from that but it's more expensive ::)Here's one on a Farmer...

Link for eBay Leather Lace...
http://www.ebay.co.uk/itm/100-Real-Round-Leather-Cord-1-5-or-2MM-String-Lace-Thong-Jewellery-HQ-/151184697716?pt=UK_Crafts_JewelleryMaking_GL&var=&hash=item23334f6974NICE, JR
-
@Dr Gonzo said:
I got it from eBay, I have used leather lace from a cobblers that is square and quite thick, I like making lanyards from that but it's more expensive ::)Here's one on a Farmer...

Link for eBay Leather Lace...
http://www.ebay.co.uk/itm/100-Real-Round-Leather-Cord-1-5-or-2MM-String-Lace-Thong-Jewellery-HQ-/151184697716?pt=UK_Crafts_JewelleryMaking_GL&var=&hash=item23334f6974]
That's my favourite one of yours - How did you do the ends> Pliers?
-
Cool beans! looks great. Thanks - I will try that.

-
Been wanting to try this for a while. Reprofiled the gutting blade on a dual pro into a locking one hand electrician. Nice to have a smaller blade on a locking 111mm, so far I like it. :)

-
-
Been wanting to try this for a while. Reprofiled the gutting blade on a dual pro into a locking one hand electrician. Nice to have a smaller blade on a locking 111mm, so far I like it. :)
Wow, this is brilliant at least

Thanks! It's similar to a Weekender now only bigger, and locking. Now if it only had scissors and scale tools... :)
-
Been wanting to try this for a while. Reprofiled the gutting blade on a dual pro into a locking one hand electrician. Nice to have a smaller blade on a locking 111mm, so far I like it. :)
Wow, this is brilliant at least

Thanks! It's similar to a Weekender now only bigger, and locking. Now if it only had scissors and scale tools... :)
Nice! I like that one alot!
-
Right, here's the beginnings of the next knife:
Machining some aluminium plate down to 4mm thick. I've been ordering tooling and parts too - 2mm ball nose end mill, 3mm TiN coated stub drill, 3mm brass rod, stainless M2 CSK torx screws, a Compact and an Explorer. Can you guess what it's going to be? 8)
-
Alox Yeoman?
-
Been wanting to try this for a while. Reprofiled the gutting blade on a dual pro into a locking one hand electrician. Nice to have a smaller blade on a locking 111mm, so far I like it. :)
Wow, this is brilliant at least

Thanks! It's similar to a Weekender now only bigger, and locking. Now if it only had scissors and scale tools... :)
Nice! I like that one alot!
Thanks Syph! It's working great so far, slightly bigger (and heavier) than the OHT due to the additional locking liner, but still a nice carry size (in my pouch anyway). :)
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


