Little Boy and Fat Man
-
I'm doing a few odd jobs today. I don't really want to start any projects on a Friday.
so I'm tuning chainsaws , clean the shop and sharpening tools.
I'm gonna be ready for summer when /if it ever gets here.
here is the fat man helping me change blades in my utility knife . I had to do a little trimming to make a new gasket fit in one of the saws and my utility knife was beyond dull.

You really should use a coin for that.
You know me Lam
I never have money
I just have tools.

-
If I had a choice between a st300 or Swisstool for the rest of my life I'd pick the st300
its a stronger tool.
I've broken and bent tools on Swisstools I have yet to bend my st300's doing the same stuff.
I would have never thought I'd say that.
Interesting. It's funny because Swisstools are seen as one of the best of the best here (I can't say for myself on either tool involved). The fact that you thought you'd never claim the ST300 to be your preferred MT further confirms that. You still prefer it even though the Swisstool has all the tools on the outside? I know that's a big selling point for them, but I guess that's not as important as durability with hard use

-
outside accessible features only go so far, at the end we all want a tool that can get the job done.
I personally found myself able to deploy the tool I need quicker on ST300 than SwissTool. -
Realization
If I had a choice between a st300 or Swisstool for the rest of my life I'd pick the st300
its a stronger tool.
I've broken and bent tools on Swisstools I have yet to bend my st300's doing the same stuff.
I would have never thought I'd say that.
Interesting. It's funny because Swisstools are seen as one of the best of the best here (I can't say for myself on either tool involved). The fact that you thought you'd never claim the ST300 to be your preferred MT further confirms that. You still prefer it even though the Swisstool has all the tools on the outside? I know that's a big selling point for them, but I guess that's not as important as durability with hard use

I've had 1x Swisstool and 2x Spirits let me down with bent/broken implements and damaged pliers (the reason I now prefer replaceable cutters on all my MTs). I've never managed to break any of my Leatherman's in similar usage.
Just my experience: Outside accessible is nice, but with practice and familiarity with the tool, you get to know how to get to what you need quickly and I've never found it to be a deal-breaker or much of a hassle.
Of course everyone's mileage may vary
. -
I agree with what Toolslinger said.

-
Little boy II helped me put some shelves in a gun safe I use to keep my knife and tools in. It was made to hold rifles its about 5foot high and 4 inches deep. Its gonna work out nice.
little boy put in all the screws holding the 3 shelves I got up so far.
I'm not done yet so he might get a little more work this evening.
-
Realization
If I had a choice between a st300 or Swisstool for the rest of my life I'd pick the st300
its a stronger tool.
I've broken and bent tools on Swisstools I have yet to bend my st300's doing the same stuff.
I would have never thought I'd say that.
Interesting. It's funny because Swisstools are seen as one of the best of the best here (I can't say for myself on either tool involved). The fact that you thought you'd never claim the ST300 to be your preferred MT further confirms that. You still prefer it even though the Swisstool has all the tools on the outside? I know that's a big selling point for them, but I guess that's not as important as durability with hard use

I always maintain that Vic and Leatherman are equals.
Both have there pros and cons.that's us mobile
-
That's is the way I should look at it also.
they are two totaly different tools.
its like comparing a sports car to a good work truck to me
-
the work truck being Leatherman? wait what would in that analogy be a good offroader like the Defender?
-
Realization
If I had a choice between a st300 or Swisstool for the rest of my life I'd pick the st300
its a stronger tool.
I've broken and bent tools on Swisstools I have yet to bend my st300's doing the same stuff.
I would have never thought I'd say that.
Interesting. It's funny because Swisstools are seen as one of the best of the best here (I can't say for myself on either tool involved). The fact that you thought you'd never claim the ST300 to be your preferred MT further confirms that. You still prefer it even though the Swisstool has all the tools on the outside? I know that's a big selling point for them, but I guess that's not as important as durability with hard use

I always maintain that Vic and Leatherman are equals.
Both have there pros and cons.that's us mobile
In my experience, I would have to agree with this as well
I've never bent a tool on any MTs I have, but I don't use them heavily either. -
I bent the bottle opener/screwdriver on my swisstool pretty bad, but it bent right back without much issue. I also mangled one of the screwdriver blades on my st300 so bad I had to break out my Dremel to re-grind it. So I've had some issues with both companies, however I wasn't using the tools 'properly', either. My own fault.

-
I'm looking at my rebar right now.
I have been doing a little edc maintenance and I had a thought.
I really prefer the look of the old polished internal blades/drivers compared to the bead blasted tools they use now.
it didn't really bother me with my old blast but they seem to stick out against the shiny rebars handles more to me.
I suppose its cheaper to blast them.
I would pay more for polished tools if it was a option.
highly polished steel is much more rust resistant then bead blasted.
start polishing your tools leatherman. You can make it back on surfing tools if it costs to much.
we wouldn't want to hurt your profit margin.
-
+1
-
Easy day for the Fat Man and Me
we pulled a few nails,sawed some trim, put in a few Phillips screw's holding a door catch on, opened some plastic bags with screws un them nothing exciting or limit pushing.
A nice slow Monday for a change:)
-
AGAIN
The Fat Man was absolutely no help moving snow.

it got to enjoy a nice day outside anyway. It may hit +15 F.
-
I think this thread has long since ceased being a test,and has become a blog.
I'm not complaining,I'm just saying

-
@sir_mike said:
Yeah Joel, I noticed the same thing. The Fat Man that I have is no help with the snow either! :D At first, I thought it was just mine being stubborn! LOLAGAIN
The Fat Man was absolutely no help moving snow.

it got to enjoy a nice day outside anyway. It may hit +15 F.
Careful, Leatherman might make another niche market tool. They'd call it the 'Multi-shovel' or something ridiculous
.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
This made me laugh out loud this morning.