Plierench the Ultimate Collector's Multitool
-
@gregozedobe said:
I'm liking these old (and not so old) Plierenches.
I have one with a few different jaws and it is one seriously heavy (and heavy duty) tool.
@gregozedobe
Another club member!
The World Flight version is thicker than the later versions after 1933. This makes them much heavier.
Is yours dated (month, year) or does it have a patent date only?
-
- collection of Plierenches.
I've been looking at hese on ebay for a while and never won one till today. I had other tools that were more important at the time so I never really got serious about. Plus every tool I ever bid on went high for some reason. I won one today so will post some pics when it arrives. Now I just got a BIN on a 1943 with 3 jaws and case. I really dont need to start a new tool to collect. :D
Welcome to the club!

They can be quite addicting. I gave a half serious consideration at one time to collecting one from every month of each year. That larkish thought quickly evaporated.
The production years from 1932/33 to around 62 or later were dated. Considering a run of around 30 years and 12 tools per year even at $10 a tool runs around $3600 and there is no way you would get out that cheap. I estimate a collection with at least one of each production of just the 8.5 in. version, month/year combo would probably cost around $10K. If you added the 7 inch version you would probably need to go up upwards of $25K since the smaller tools are harder to find and always go for a higher price. That would not include the A and B versions, the World Flight years which weren't dated and the later versions by Masterform, Vaco and NoPack which are not dated or the specialty versions made without dates.
Thank you. :)
@JAfromMn said:
You all are some real SmurfsI'm going to try find one of these.
I was just going to collect **diamond co tools ** and trimo pipe wrenchs but I am going to make a little room for a pliers wrench in my old tool collection drawer in my tool box.
I don't buy my old tools of evilbay
it might take a lot longer but I enjoy the hunt.
Well then Joel, I guess I'd better not show you my Diamond Calk and Horseshoe adjustable wrenches and slip joint pliers. :D
- collection of Plierenches.
-
@JAfromMn said:
You all are some real SmurfsI'm going to try find one of these.
I was just going to collect diamond co tools and trimo pipe wrenchs but I am going to make a little room for a pliers wrench in my old tool collection drawer in my tool box.
I don't buy my old tools of evilbay
it might take a lot longer but I enjoy the hunt.
@JA
Sorry about that. :DIf you are only going to get one try to get the basic set with the three jaws, the straight jaw, the pipe jaw and the wire jaw (for making springs).
There were millions made so it isn't hard to find them if you know what you are seeking. All too often the unusual name and look of the tool makes people think they are more rare and worth much more than the going price.
-
@David said:
Here is a Link to the first one I won yesterday. A link to the second one. Can you tell much about the history of these from their pics Lyndon?Hi David,
The first one is the World Flight version named after the 1924 World Flight. Joseph Eifel the inventory used the World Flight to market this version of his tool. This version was made between 1923/24 and 1932. You are missing the wire jaw. FYI, I talked the seller into relisting this one. Glad to see it has a good home. This also has the E-F Angle Screwdriver which was often sold or given away with these sets. I don't have one yet so I am extremely envious....
The second one is from the second later patent. They started making them in 1932/33 and continued into the early 60's, All of the later plierench tools made by Masterform, VACO and NOPAK are modeled on this version. This is the base set with all three jaws. The expanded set comes with two additional jaws a clip and the handle lock.
-
Here is a Link to the first one I won yesterday. A link to the second one. Can you tell much about the history of these from their pics Lyndon?
Hi David,
The first one is the World Flight version named after the 1924 World Flight. Joseph Eifel the inventory used the World Flight to market this version of his tool. This version was made between 1923/24 and 1932. You are missing the wire jaw. FYI, I talked the seller into relisting this one. Glad to see it has a good home. This also has the E-F Angle Screwdriver which was often sold or given away with these sets. I don't have one yet so I am extremely envious....
The second one is from the second later patent. They started making them in 1932/33 and continued into the early 60's, All of the later plierench tools made by Masterform, VACO and NOPAK are modeled on this version. This is the base set with all three jaws. The expanded set comes with two additional jaws a clip and the handle lock.
Thank you for the information. It's much appericated.
-
I'm liking these old (and not so old) Plierenches.

I have one with a few different jaws and it is one seriously heavy (and heavy duty) tool.
@gregozedobe
Another club member!
The World Flight version is thicker than the later versions after 1933. This makes them much heavier.
Is yours dated (month, year) or does it have a patent date only?
I've had mine for a bit over a year now. I can't see any dates on it. The markings stamped on it are:
Eifel-Geared Plierench
81/2" - '41 -5 > 10-to-1 $5.00Forged Chrom-Molbdnm Alloy<
Pats. Nos. 1181654 1862817
Made in U.S.A. by -
Amer. Plierench Corp'n
Chicago. Ill.Locks this way <
NB the ">" and "<" on the second and last lines are actually symbols of arrows with curved tails
The backside is blank except for some initials scrathed on (presumably those of a previous owner).
I have 3 jaws with it.
-
Greg the 41 after the 8 1/2 is the year.
Sent from my RM-845_nam_vzw_100 using Tapatalk
-
I'm liking these old (and not so old) Plierenches.

I have one with a few different jaws and it is one seriously heavy (and heavy duty) tool.
@gregozedobe
Another club member!
The World Flight version is thicker than the later versions after 1933. This makes them much heavier.
Is yours dated (month, year) or does it have a patent date only?
I've had mine for a bit over a year now. I can't see any dates on it. The markings stamped on it are:
Eifel-Geared Plierench
81/2" - '41 -5 > 10-to-1 $5.00Forged Chrom-Molbdnm Alloy<
Pats. Nos. 1181654 1862817
Made in U.S.A. by -
Amer. Plierench Corp'n
Chicago. Ill.Locks this way <
NB the ">" and "<" on the second and last lines are actually symbols of arrows with curved tails
The backside is blank except for some initials scratched on (presumably those of a previous owner).
I have 3 jaws with it.
David is correct. The 5 after the year is the month.
You have a May(5) 1941 plierench set. The backside is usually blank after around 1933 or 1934. Your guess regarding initials is probably correct. 73 years old in May this year. It saw WWII.
-
I added another starter set. This is a 1933. This is the first year of the second patent.
The second photo is a comparison shot with a 1950 and the 1933.


-
This is another recent Plierench acquisition. The sticker has the Masterform company name.

-
A couple good additions to your colletion! 8) :)
-
Nice!
So were there any big changes between 1933 and 1950?
-
It was interesting and cool to find this site and post. Thank you.
So I have the Eifel Geared Plierench. It is the 8 1/2", dated 8 month, 1946. I have 3 jaws, which include the cutting jaw with clip. I also have the cloth case and everything is in excellent condition with little to no wear. I also have two (2) original brochure/manuals.
It is very cool tool indeed. As I am getting older and trying to downsize a bit, I am debating selling mine. I know prices vary greatly. Given that this set is a complete with the manuals, any suggestion on a value or market? Anyone interested can post or also email me.
Thank you,
Fred


-
@MetroMechanic said:
It was interesting and cool to find this site and post. Thank you.So I have the Eifel Geared Plierench. It is the 8 1/2", dated 8 month, 1946. I have 3 jaws, which include the cutting jaw with clip. I also have the cloth case and everything is in excellent condition with little to no wear. I also have two (2) original brochure/manuals.
It is very cool tool indeed. As I am getting older and trying to downsize a bit, I am debating selling mine. I know prices vary greatly. Given that this set is a complete with the manuals, any suggestion on a value or market? Anyone interested can post or also email me.
Thank you,
FredHi Fred, welcome to the forum. Nice Plierench set.
Check eBay for recent prices. If you decide to sell, there are collectors here
and a sales forum ;) -
Thank you Yadda.
I will look into the sale forum. Great advice.
Price is elusive since eBay has many different condition units, and most are well "used". None have the clip or manuals. I just want it to be fair to a buyer and myself. My old friend (he would be in his 100's) bought this new in 1946 and took such good care of it. He would have liked that. I have never used it myself other than to play with it a bit.
I hope someone that collects and preserves it ends up with it. Even the two manuals are in pretty decent shape considering (they are clean).
Maybe offer the second manual to a separate collector? Don't know if those are desired much.
So I will do some research and let you all know. Thanks again. Miss the days of quality, invention, and American pride in a job well done with ones' hands!
-
The manuals are collectible. I've seen them go for around $10 to $30 without the tools. The clip, case and manual make it more valuable. You also have the pipe cutter jaw which is not as common.
-
Thank you. That all makes sense. I think the pipe cutter jaw is also for splitting nuts when they are stripped or frozen? All great info. I will stay in touch. Great site, thread, and thanks again
Fred
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login