What did you use your Leatherman for today?
-
I used the awl (carbon scraper) on my MUT to start holes in the lid of a crate, then used the Philips bit to drive a couple of screws in.
I've wondered how well the scraper works as an awl. How did it hold up to the job?
I used it to go through 1/4" plywood, and it had no problems going through it, and it looks to be in the same condition as it was before doing that.

Sent from my iPhone 5 using Tapatalk
That is AWESOME!!! I may just have a use for a MUT given this info :D
-
I used the awl (carbon scraper) on my MUT to start holes in the lid of a crate, then used the Philips bit to drive a couple of screws in.
I've wondered how well the scraper works as an awl. How did it hold up to the job?
I used it to go through 1/4" plywood, and it had no problems going through it, and it looks to be in the same condition as it was before doing that.

Sent from my iPhone 5 using Tapatalk
That is AWESOME!!! I may just have a use for a MUT given this info :D
I'm not sure how it would fair doing this often, or if you used it in hardwood though. I guess it should be ok as it should be harder than wood??
Good thing about it is, it's replaceable if it does get screwed up. -
Rebar to slice up a cord tied to a tree. Been there for 2 years and the trunk had little more room to grow.
The serrated knife ripped it apart.
Sent from my GT-S5660 using Tapatalk 2
-
The ST300 got a good workout installing some more sarking (reflective foil laminate) on my shed.
-
Surge plus a Tshank Wood saw was used to rough cut Pine Derby Car for a Scout.

-
Joint effort bringing the Bearcat back to life in the modern world with the Kick and Fieldmaster. It has all the crystals but the crystal frequencies are from the late 70's. its gonna take some effort to get 6 more channels of useful scanning out of this old thing. All I get on it is weather and a cab company as of now. Its clean and working properly now so im thrilled.



-
@Bensasupertool said:
Joint effort bringing the Bearcat back to life in the modern world with the Kick and Fieldmaster. It has all the crystals but the crystal frequencies are from the late 70's. its gonna take some effort to get 6 more channels of useful scanning out of this old thing. All I get on it is weather and a cab company as of now. Its clean and working properly now so im thrilled.That's a nice looking Kick. I don't have a BO LM yet.
-
Joint effort bringing the Bearcat back to life in the modern world with the Kick and Fieldmaster. It has all the crystals but the crystal frequencies are from the late 70's. its gonna take some effort to get 6 more channels of useful scanning out of this old thing. All I get on it is weather and a cab company as of now. Its clean and working properly now so im thrilled.
That's a nice looking Kick. I don't have a BO LM yet.
That is indeed a nice looking tool. As a recent convert to BO goodness, I too am in "need" of a BO Leatherman... :D
-
Its gonna be a black week then. >:D
-
Today so far its pictures only.

-
Earlier I was using my BORebar to aid me with prepping various documents to be fed to our large shredder here at work. I primarily used the pliers for pulling prong fasteners from folders, and gripping/tearing names from folders that were too thick to be put through the shredder. I had to use the serrated blade on a couple folders for the name removal task as they were tougher...but no match for the blade

-
Black PST Soup

-
Bought a nice padlock for my Holland backpacking trip and of course I lost the key.
2 years since I carried the padlock in the mountains, to the seaside and throughout Europe... Here comes Super Tool to the rescue:
-
Used a Kick clip, Rebar and Crunch to modify and reassemble a Blast from spare parts.

Also used the Kick clip to reassemble the inner tools on a Rebar.
-
Used my Surge to dismantle an old skeleton key lock out of an old door. Don't worry, I did throw it away. Gonna ask the boss if I can keep it and use it for one of my doors.
that's us mobile
-
Used a pst2 to disassemble and clean a fan yesterday.
-
@Monrogue said:
Earlier I was using my BORebar to aid me with prepping various documents to be fed to our large shredder here at work. I primarily used the pliers for pulling prong fasteners from folders, and gripping/tearing names from folders that were too thick to be put through the shredder. I had to use the serrated blade on a couple folders for the name removal task as they were tougher...but no match for the blade
Did more of this again a little bit ago here at work. The BORebar came in handy again

-
Rebar to cut a thick cardboard with serrated knife.
Test used the Phillips screw driver to really tighten my kids bed. The driver has something more than a scratch now. I will try to put a pic. Should have used my regular heavy duty tools :-)Sent from my GT-S5660 using Tapatalk 2
-
Used the serated blade on my Surge to cot up some ceiling tiles from the water leak yesterday.

that's us mobile
-
File on rebar to remove 2 very pointed 'parts' on button of little toddler. It was really sharp and could have hurt him. No clue how that came to be.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login