Hex size?
-
@gregozedobe said:
And next the Canadians will come on board claiming everything should be square drive (Robertson) 'cause it is far superior to anything else ....
;) :Dtbh I think Robertson is better also I think the metric system is better too.
-
I still don´t get the initial question.
Are you looking for the most common Hex sizes in a special field or are you researching hex sizes used on Multitools or are you planning a Tool a la the Pocketwrench?
concerning Robertson,. I have no experience with them.
But for wood or drywall work i prefer Torx over Pozi, Pozi over Phillips.
Working with machinery, I think I like allen head screws the best.
but Torx bits are great for rescuing mucked up Allen head bolts... hammer a Torx in and unscrew. Discard bit and bolt, done. :D -
@lowtech said:
I still don´t get the initial question.
Are you looking for the most common Hex sizes in a special field or are you researching hex sizes used on Multitools or are you planning a Tool a la the Pocketwrench?
concerning Robertson,. I have no experience with them.
But for wood or drywall work i prefer Torx over Pozi, Pozi over Phillips.
Working with machinery, I think I like allen head screws the best.
but Torx bits are great for rescuing mucked up Allen head bolts... hammer a Torx in and unscrew. Discard bit and bolt, done. :DI think he means in bit-sizes ;)
-
Are we talking allen or bolts?
that's us mobile
-
I had an idea for the new challenge coin and how the old one had a single 1/4 hex that ended up causing so much trouble in my design I want 2 holes, so instead of them being the same I thought why not add more functionality. :)
-
... I prefer Torx over Pozi, Pozi over Phillips.
Interesting factoid. The Philips recess was designed to "cam out" under excessive torque back when tools didn't have reliable adjustable torque setting, rather than snap the head off the screw.
I knew thet. And usually, on vintage japanese bikes , it cams out just before the Screwdriver would loosen the screw/bolt...
-
you need an impact driver then :)
If you're talking about wrench sizes, the common small metric ones are:
13mm for M8
10mm for M6
8mm for M5
7mm for M4
5.5mm for M3On a slightly related note...
It seems that German machinery (and I have no idea if this is unique to them, unique to Krone or we've chanced not having anything else that does this) will sometimes use the next size down spanner for one side of a nut/bolt combination. So you have an M10 bolt with a 16mm spanner on one side and a 17mm (normal) on the other. This is simultaneously really irritating when you find that you haven't got sufficient weirdly sized spanners/sockets, and really clever because in a set of combination spanners you only have one of each size so it's useful being able to use two different sizes on either side of a fitting. We get around the second issue there by cutting spanners in half and welding them back together in pairs, so for instance we have one combination that's a ring 24 and an open 27, then its brother a ring 27 with an open 24. -
@Cogito said:
I had an idea for the new challenge coin and how the old one had a single 1/4 hex that ended up causing so much trouble in my design I want 2 holes, so instead of them being the same I thought why not add more functionality. :)Oh you mean driver side... the mini bit drivers are a 4mm socket, thats .03mm bigger than 5/32.
-
@Cupboard said:
you need an impact driver then :)...
On a slightly related note...
It seems that German machinery (and I have no idea if this is unique to them, unique to Krone or we've chanced not having anything else that does this) will sometimes use the next size down spanner for one side of a nut/bolt combination. So you have an M10 bolt with a 16mm spanner on one side and a 17mm (normal) on the other. This is simultaneously really irritating when you find that you haven't got sufficient weirdly sized spanners/sockets, and really clever because in a set of combination spanners you only have one of each size so it's useful being able to use two different sizes on either side of a fitting. We get around the second issue there by cutting spanners in half and welding them back together in pairs, so for instance we have one combination that's a ring 24 and an open 27, then its brother a ring 27 with an open 24.I do own a mechanical impact driver and a pneumatic one. And I am nort afraid to drill off a Phillips head if it´s stubborn...
The use of differently sized nuts and bolts can be found on some motorcycles, too, so it is not only a german idea.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login