What did you use your Sak on today?
-
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.
So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade
Yeah I'd say I'm going with that name
What would the scraper blade be? -
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.
So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade
Yeah I'd say I'm going with that name
What would the scraper blade be?It sounds good - makes great impression

Uff, sorry about that, I should have said "scraper blade"

... the above mentioned vic's can opener :Dbtw, I like pruner blade too

-
Well, technically this wasn't today... it was few days back. But I had to replace a board in a piece of equipment.
I used the scissors to snip out some wires that were being replaced with the new board. I also used the scissors to cut some zip ties to remove the old wiring and get it read for the new.
I used the various screwdrivers to remove parts (and of course replace them later).
I used the main blade to gently pry back some tape over a connector. I then used the magnifying glass to get a good look at the connector to see if it was just slide in or if there are a minute latch of some sort.
I used the pliers to gently pull out the ribbon cable from the old board and then press it back into the new one.
I used the fish de-hooker to help slide some of cables through some narrow areas.
And I used the flat head screwdriver in the bitdriver to 'push home' some of the connectors that were being a touch stubborn.
-
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.
So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade
Yeah I'd say I'm going with that name
What would the scraper blade be?It sounds good - makes great impression

Uff, sorry about that, I should have said "scraper blade"

... the above mentioned vic's can opener :Dbtw, I like pruner blade too

Ah, I see now. I originally was going to have the can opener, then decided I'd rather have a secondary small blade as I find it quite useful. However, I would rather had had the utility blade from the Alox Electrician, but decided not to spring for one as I already owned a Pioneer Rancher, which has the pruner blade. I probably should have just sprung for the utility blade and it would have been that much more perfect to me

-
Removing old price labels today at the store, couldn't get any of them up enough to peel off. That's where the SI's can opener came into play....

Did you make that pic right with the scraper blades on purpose? :D
:D Oh the irony. "I need a scraper..." looks at scrapers in package, "Nah", pulls out SAK.

Nobody amused by the brand of scraper either.
Good job Jersey, planned or not you win this round:D A happy coincidence that those were the labels that needed to be removed. I figured you guys would catch that instantly. A 3" 4-way scraper would have been a bit of overkill for the job, plus why open perfectly good merchandise when I already had a tool handy?
-
[quote author=Monrogue link=topic=41342.msg855621#msg855621 date=1394034833]
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade
Yeah I'd say I'm going with that name
What would the scraper blade be?It sounds good - makes great impression

Uff, sorry about that, I should have said "scraper blade"

... the above mentioned vic's can opener :Dbtw, I like pruner blade too

Ah, I see now. I originally was going to have the can opener, then decided I'd rather have a secondary small blade as I find it quite useful. However, I would rather had had the utility blade from the Alox Electrician, but decided not to spring for one as I already owned a Pioneer Rancher, which has the pruner blade. I probably should have just sprung for the utility blade and it would have been that much more perfect to me

[/quote]
I know that feeling , it's really hard to decide which blade or tool left out. In mind I'm trying to do a 3-4 layer SAK, but then it always came out with at least 6 layers
Btw, now you have to make some ranking
Has "The Rogue" prevailed against "Yeochamp" & Explorer ? :D
And, are you missing there some of back-layer & scale tools? -
[quote author=Monrogue link=topic=41342.msg855621#msg855621 date=1394034833]
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade
Yeah I'd say I'm going with that name
What would the scraper blade be?It sounds good - makes great impression

Uff, sorry about that, I should have said "scraper blade"

... the above mentioned vic's can opener :Dbtw, I like pruner blade too

Ah, I see now. I originally was going to have the can opener, then decided I'd rather have a secondary small blade as I find it quite useful. However, I would rather had had the utility blade from the Alox Electrician, but decided not to spring for one as I already owned a Pioneer Rancher, which has the pruner blade. I probably should have just sprung for the utility blade and it would have been that much more perfect to me

[/quote]You can always get another custom SAK made...

:D
-
[quote author=Caranthanus link=topic=41342.msg855815#msg855815 date=1394049194]
[quote author=Monrogue link=topic=41342.msg855621#msg855621 date=1394034833]
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade
Yeah I'd say I'm going with that name
What would the scraper blade be?It sounds good - makes great impression

Uff, sorry about that, I should have said "scraper blade"

... the above mentioned vic's can opener :Dbtw, I like pruner blade too

Ah, I see now. I originally was going to have the can opener, then decided I'd rather have a secondary small blade as I find it quite useful. However, I would rather had had the utility blade from the Alox Electrician, but decided not to spring for one as I already owned a Pioneer Rancher, which has the pruner blade. I probably should have just sprung for the utility blade and it would have been that much more perfect to me

[/quote]
I know that feeling , it's really hard to decide which blade or tool left out. In mind I'm trying to do a 3-4 layer SAK, but then it always came out with at least 6 layers
Btw, now you have to make some ranking
Has "The Rogue" prevailed against "Yeochamp" & Explorer ? :D
And, are you missing there some of back-layer & scale tools?
[/quote]Yeah it's hard to decide. I do the same, and end up with more layers than originally planned. The Rogue is basically my perfect custom Alox. I do wish I'd just gone ahead and paid the few extra bucks to have the Electrician's utility blade (which I do have on my Mechaneer, and possibly could have sent in with the other parts to have him put that blade on the Rogue and the pruner blade on the Mechaneer...hindsight's 20/20 as they say). Honestly, the pruner blade is sufficient, and at one point I actually preferred it to the Electrician's utility blade, but I just like the shape and how it cut tape to open boxes at work. It was better for making precise cuts too. Anyway, I love The Rogue, and am super pleased to have gotten it made.
As for how it ranks among my main SAKs, the Yeochamp, Explorer and Mechaneer...that's tough. I could easily say it is and likely will be my favorite, but that could be the newness factor. I am sure that the Mechaneer has been replaced as my favorite Alox though. I may actually not even end up carrying it much anymore as I'm trying to limit my EDC lineups. I actually think I may prefer my new Explorer Plus to my Yeochamp as well, but that could be because I got my initials engraved on the main blade. Another factor in favor of the cellidor models is, as you mentioned, the scale and back tools. I love the sort of total package of the cellidor models I have, but I can honestly say I rarely use the back or scale tools. This makes my Rogue that much more likely to be my favorite due to it's smooth, sleek design. It has all the tools I really want/need in a SAK, and it looks awesome in my favorite color scheme of black/red

-
[quote author=Caranthanus link=topic=41342.msg855815#msg855815 date=1394049194]
[quote author=Monrogue link=topic=41342.msg855621#msg855621 date=1394034833]
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade
Yeah I'd say I'm going with that name
What would the scraper blade be?It sounds good - makes great impression

Uff, sorry about that, I should have said "scraper blade"

... the above mentioned vic's can opener :Dbtw, I like pruner blade too

Ah, I see now. I originally was going to have the can opener, then decided I'd rather have a secondary small blade as I find it quite useful. However, I would rather had had the utility blade from the Alox Electrician, but decided not to spring for one as I already owned a Pioneer Rancher, which has the pruner blade. I probably should have just sprung for the utility blade and it would have been that much more perfect to me

[/quote]You can always get another custom SAK made...

:D
[/quote]Ha, easier said than done ;) I could maybe do one a year during tax refund season, but I honestly don't need another one. If I were to do anything, I would just swap that utility blade from my Mechaneer with the pruner blade from the Rogue. That may be a cheaper job actually

-
How much fun am I killing if I say the Rogue already exists? :whistle:
-
@bmot said:
How much fun am I killing if I say the Rogue already exists? :whistle:I won't let you kill my Rogue buzz 8) Didn't know about that one though. I actually would have gotten that if it was still in stock possibly. I like the Rambler (don't own one though), and the Classic (do own one), but I would rather have the nail cleaner tip instead of the SD version. I'm really not going to use a tiny Classic as a screwdriver, and the nail cleaner tip probably could have been used that way anyway :think:
-
[quote author=Monrogue link=topic=41342.msg855818#msg855818 date=1394049485]
[quote author=Caranthanus link=topic=41342.msg855815#msg855815 date=1394049194]
[quote author=Monrogue link=topic=41342.msg855621#msg855621 date=1394034833]
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade
Yeah I'd say I'm going with that name
What would the scraper blade be?It sounds good - makes great impression

Uff, sorry about that, I should have said "scraper blade"

... the above mentioned vic's can opener :Dbtw, I like pruner blade too

Ah, I see now. I originally was going to have the can opener, then decided I'd rather have a secondary small blade as I find it quite useful. However, I would rather had had the utility blade from the Alox Electrician, but decided not to spring for one as I already owned a Pioneer Rancher, which has the pruner blade. I probably should have just sprung for the utility blade and it would have been that much more perfect to me

[/quote]
I know that feeling , it's really hard to decide which blade or tool left out. In mind I'm trying to do a 3-4 layer SAK, but then it always came out with at least 6 layers
Btw, now you have to make some ranking
Has "The Rogue" prevailed against "Yeochamp" & Explorer ? :D
And, are you missing there some of back-layer & scale tools?
[/quote]Yeah it's hard to decide. I do the same, and end up with more layers than originally planned. The Rogue is basically my perfect custom Alox. I do wish I'd just gone ahead and paid the few extra bucks to have the Electrician's utility blade (which I do have on my Mechaneer, and possibly could have sent in with the other parts to have him put that blade on the Rogue and the pruner blade on the Mechaneer...hindsight's 20/20 as they say). Honestly, the pruner blade is sufficient, and at one point I actually preferred it to the Electrician's utility blade, but I just like the shape and how it cut tape to open boxes at work. It was better for making precise cuts too. Anyway, I love The Rogue, and am super pleased to have gotten it made.
As for how it ranks among my main SAKs, the Yeochamp, Explorer and Mechaneer...that's tough. I could easily say it is and likely will be my favorite, but that could be the newness factor. I am sure that the Mechaneer has been replaced as my favorite Alox though. I may actually not even end up carrying it much anymore as I'm trying to limit my EDC lineups. I actually think I may prefer my new Explorer Plus to my Yeochamp as well, but that could be because I got my initials engraved on the main blade. Another factor in favor of the cellidor models is, as you mentioned, the scale and back tools. I love the sort of total package of the cellidor models I have, but I can honestly say I rarely use the back or scale tools. This makes my Rogue that much more likely to be my favorite due to it's smooth, sleek design. It has all the tools I really want/need in a SAK, and it looks awesome in my favorite color scheme of black/red

[/quote]
Thanks for comparison

Out of the cellidor SAK universe, that color scheme (black on the white/silver with some red added) is my favorite too - there's no doubt
So at least that my choice will be a piece of cake :D -
[quote author=Caranthanus link=topic=41342.msg855834#msg855834 date=1394051478]
[quote author=Monrogue link=topic=41342.msg855818#msg855818 date=1394049485]
[quote author=Caranthanus link=topic=41342.msg855815#msg855815 date=1394049194]
[quote author=Monrogue link=topic=41342.msg855621#msg855621 date=1394034833]
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade
Yeah I'd say I'm going with that name
What would the scraper blade be?It sounds good - makes great impression

Uff, sorry about that, I should have said "scraper blade"

... the above mentioned vic's can opener :Dbtw, I like pruner blade too

Ah, I see now. I originally was going to have the can opener, then decided I'd rather have a secondary small blade as I find it quite useful. However, I would rather had had the utility blade from the Alox Electrician, but decided not to spring for one as I already owned a Pioneer Rancher, which has the pruner blade. I probably should have just sprung for the utility blade and it would have been that much more perfect to me

[/quote]
I know that feeling , it's really hard to decide which blade or tool left out. In mind I'm trying to do a 3-4 layer SAK, but then it always came out with at least 6 layers
Btw, now you have to make some ranking
Has "The Rogue" prevailed against "Yeochamp" & Explorer ? :D
And, are you missing there some of back-layer & scale tools?
[/quote]Yeah it's hard to decide. I do the same, and end up with more layers than originally planned. The Rogue is basically my perfect custom Alox. I do wish I'd just gone ahead and paid the few extra bucks to have the Electrician's utility blade (which I do have on my Mechaneer, and possibly could have sent in with the other parts to have him put that blade on the Rogue and the pruner blade on the Mechaneer...hindsight's 20/20 as they say). Honestly, the pruner blade is sufficient, and at one point I actually preferred it to the Electrician's utility blade, but I just like the shape and how it cut tape to open boxes at work. It was better for making precise cuts too. Anyway, I love The Rogue, and am super pleased to have gotten it made.
As for how it ranks among my main SAKs, the Yeochamp, Explorer and Mechaneer...that's tough. I could easily say it is and likely will be my favorite, but that could be the newness factor. I am sure that the Mechaneer has been replaced as my favorite Alox though. I may actually not even end up carrying it much anymore as I'm trying to limit my EDC lineups. I actually think I may prefer my new Explorer Plus to my Yeochamp as well, but that could be because I got my initials engraved on the main blade. Another factor in favor of the cellidor models is, as you mentioned, the scale and back tools. I love the sort of total package of the cellidor models I have, but I can honestly say I rarely use the back or scale tools. This makes my Rogue that much more likely to be my favorite due to it's smooth, sleek design. It has all the tools I really want/need in a SAK, and it looks awesome in my favorite color scheme of black/red

[/quote]
Thanks for comparison

Out of the cellidor SAK universe, that color scheme (black on the white/silver with some red added) is my favorite too - there's no doubt
So at least that my choice will be a piece of cake :D
[/quote]It is a sweet color scheme indeed

-
Used the Signature Lite to open the package with the Huntsman, Cadet and Swisstool I received today.

-
Used the S557 to open a couple bales of hay and to remove packaging on a jug of "Pet odor remover" ::)
-
Used my Pioneer to cut up foam sheets to ready something for shipping.
-
Recruit to save a purse from a shopping cart. Almost broke the little bugger. Normally I'd have my Spirit on me but I'm already suited up for date night... OK not suited up but going lighter on knives, tools and lights
-
I used the Rogue a couple times tonight at my wife's great grandmother's 95th birthday party. I used the scissors to cut a straw shorter for the baby, and the pruner blade to cut the plastic holding a couple of new little drink bottles.
-
@Monrogue said:
I used the Rogue a couple times tonight at my wife's great grandmother's 95th birthday party. I used the scissors to cut a straw shorter for the baby, and the pruner blade to cut the plastic holding a couple of new little drink bottles.Getting plenty of use out of that Rogue
Happy Birthday to that young lady btw!¡!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

