Piranha 2
-
Bob, it would be handy to have a professional metal worker's opinion on this. As a machinist, do you think there is enough metal there to stand up to regular use, or do you legitimately see that happening?
Def
-
That does not look all that promising. Lucky for me, it will be a shelf queen whenever I get one.
-
@Grant Lamontagne said:
Bob, it would be handy to have a professional metal worker's opinion on this. As a machinist, do you think there is enough metal there to stand up to regular use, or do you legitimately see that happening?Def
Truth be told, I don't know. There is certainly a potential weak point there, but the Piranha itself is short enough that it self-limits the amount of force that can be applied. Bottom line, we will just have to trust that the Leatherman engineers fully tested it before starting production.
-
If it can be used to pry, the following things will happen to it-
-It will get jammed into something and then either kicked or stood on.
-It will get jammed, then hammered on
-Some will go get a cheater bar.I've done 2 of these to my Pirahna, all of them to my Pocketwrench.
-
This might be the best of the piranha family if it works.
it will be a new step in one piece tool evolution. A tool should hold its bits or use Chapman style bits the have a ball bearing that can keep them from falling out.
a bit falling out when using a tool is very annoying.
-
if you look at it as a novelty item that will get occasional use then it should survive long enough for it to not be a problem
-
With tax and shipping, it is $44. :o
Same as what I paid for ST300+Micra. -
Bob, is that for real?
It mirrors almost exactly how early Gen Piranha broke. Don't these guys do research or math or something?

-
old Piranha was a sturdy little bugger from what i saw, but this really makes me pause. especially at the price
-
@Lam.Kampfer said:
With tax and shipping, it is $44. :o
Same as what I paid for ST300+Micra..
that's way to much for a assistant tool.
I can buy a crescent wrench, ratchet , quite a few bits and a mini pry bar for that much money.
-
@Lam.Kampfer said:
Being more versatile, it can drive LM's large selection of 2 dimensional bits in addition to normal hex bits.Seen like the new added slot will hold the bits in place during usage, which is a improvement.
Now I think about, can't the normal Piranha use 2D bits with 1/4" hex holder? I think so, that makes Piranha 2 totally un necessary.
-
Being more versatile, it can drive LM's large selection of 2 dimensional bits in addition to normal hex bits.
Seen like the new added slot will hold the bits in place during usage, which is a improvement.
Now I think about, can't the normal Piranha use 2D bits with 1/4" hex holder? I think so, that makes Piranha 2 totally un necessary.
yes it can Lam but they fall out easy.
still I,agree unnecessary
if it works go with it is what I say.
-
@Mr. Whippy said:
Bob, is that for real?It mirrors almost exactly how early Gen Piranha broke. Don't these guys do research or math or something?

That's just my amateur photoshop work Nate, I don't actually have one of these tools. :-\
-
Does it bug anyone else that the Piranha has both a 1/2 inch and a 13mm driver? Since 13mm is a few microns larger than 1/2 inch, they should have gone for 12 and 14 on the Metric side.
-
Waiting for a smaller wrench to appear on the multitools, similar to some select Wenger tools had, but of more usable sizes of 1/2, 5/16, 3/8 inch.
Leatherman already had a 1/2 & 3/8 inch wrench. If that could by implemented into a multitool, via a smaller piranha-like driver, it would be a lot better than a redundant flathead driver.
Those that work on top-side battery terminals will appreciate an easier to access 1/2 & 3/8 inch wrench.
Rant:
Spoiler:
If Wenger had used their heads and at least started at 3/8 on their Universal Wrenches they might had gotten more popular. If I had he tools and ability, would reprofile the wrench bottom to accommodate 3/8" opening, and working it back. Not sure how much metal would have to be taken down, and probably would require computer aided tooling. -
The other thing is how the Piranha has what? 3 1/4" drivers? The smallest in the English jaw, the "eye" or bit driver, and the bottle opener. I really think they could have clevered on this tool a little more.
-
@av8r1 said:
The other thing is how the Piranha has what? 3 1/4" drivers? The smallest in the English jaw, the "eye" or bit driver, and the bottle opener. I really think they could have clevered on this tool a little more.I agree
a little more thought should have went into it.
Im still am going to get one but I am not in a big rush.
-
I do have one on its way, and because of this thread, I am dying to get a closer look at it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



