What did you use your Leatherman for today?
-
I used the Blast's metal file to file down the last pin holding the remnants of my SAK Climber together so I can pinch the scissors and install them in my SAK Tinker.
The file doesn't feel like much but it ripped through that pin quick smart.

Then had to lightly pry the layers off the pin using the small flathead

And lastly to twist the pin a couple of times so it'd move

You can see the years of crap that have collected on the layers on the inside of the SAK liners. Might hit them with the sander real quick.
After a week of carrying my Wave I've been missing my Blast :)
-
I just used the scissor blades of a beater Micra to grab a watch band pin to remove it. I didn't have a singe set of needlenose pliers fine enough for the task of grabbing the little spring loaded pin and pulling it back to take it out. The Micra scissor blades grabbed it firmly, and removed it easily without marring the pin in any significant way. Weird.
Also, the flat of the scissor blade was used to compress the pin to put it back in place with new watch band on it.
Micra for the win!
-
The Blast had to rescue my SAK Cybertool today. I was stripping some old broken hard drives to destroy the platters. The SAK didn't have the right bits for the job.
Who knows why they have a couple of double sided bits, then the rest are single sided. Anyway, out comes the Blast with the bit kit to save the day.


-
GO BLAST! Nice action shots man.
-
All this Blast talk is making me miss mine. It was my first multitool afterall :(
-
All this Blast talk is making me miss mine. It was my first multitool afterall :(
if ya want that warm and fuzzy feeling again, I'll trade you a Blast for a certain black scaled beauty you have.
:D:D
-
@Monrogue said:
All this Blast talk is making me miss mine. It was my first multitool afterall :(Go on, you know you want another one
That's the only reason I have a Kick… for nostalgias sake (since it was my first one and I lost it).Plus you guys over there pay such a tiny amount for Leathermans. Why wouldn't you get one?
-
All this Blast talk is making me miss mine. It was my first multitool afterall :(
if ya want that warm and fuzzy feeling again, I'll trade you a Blast for a certain black scaled beauty you have.
:DHaha, I don't miss it that much, but nice try bud

-
it was worth a shot.
-
I used my Wave scissors to trim a hang nail. They work pretty good although not as well as Vic scissors.
-
I used my Surge to change grips on my Beretta....

-
Used the P.U.G to remount a scope on a Weirhauch HW25 for father and son at the gun club.
-
@Surgeuser said:
I used my Surge to change grips on my Beretta....It's bigger than your pistol :D
-
My bolt lock on my 7mm-08 started failing recently. I guess it's from a few years of me being a slack smurf and letting Hoppes No. 9 drip down into the safety/trigger and it's hardened :(
That bit kit I got for the Blast has made it infinitely more useful.


You can put some decent torque on the Wave like this, but the Blast doesn't like it so much. That saying it was fine, it just flexed.


I'll admit the Blast wasn't much help in taking the trigger mech out. I had to punch a couple of very stuck pins out and needed to get a full size set of pliers, grab with the wire cutter and whack the pliers with a small hammer :'( I didn't bust up the pin too bad.
Now to figure out how to clean up this hardened solvent...
-
Used the P.U.G to remount a scope on a Weirhauch HW25 for father and son at the gun club.
I'm not sure what the P.U.G is.
It's my Pretty Useful Guntool :D
-
I used the scissors on my Wave to cut out some addresses written on paper.
-
Used my Sidekick at work today to tighten a loose autoclave clamp.
-
@Monrogue said:
Earlier I was using my BORebar to aid me with prepping various documents to be fed to our large shredder here at work. I primarily used the pliers for pulling prong fasteners from folders, and gripping/tearing names from folders that were too thick to be put through the shredder. I had to use the serrated blade on a couple folders for the name removal task as they were tougher...but no match for the blade
More of this type of work today, but I used my new BO PST this time

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login