What did you use your Sak on today?
-
SwissChamp had a busy morning at the club.
Scissors got used to cut targets,then the cap lifter got used to prise open 'scope mountings( why do BSA put sticky tape inside Thier scope mounts
) then the whole knife got used as the weight on the end of a jerry built plumb line to line up a scope.Back at the club house it got out on a play date with a Huntsman and a ruby Climber with Swiss scenic print.
-
eCig maintenance.
-
-
I used the nail file on my Rogue to act as a key for the toilet paper dispenser in one of the bathrooms here at work. It seems anything would work as long as it was of a similar shape.
-
Cap lifter on a 91mm sak works for most of them too.
that's us mobile
-
I found a new use for the cuticle pusher this week, on my MiniChamp!
Plucking staples out from paper sheets, envelopes etc.....
I'm very glad for this finding and would love to share with you guys, since here in the office it's common to "loose" the proper appliance for that for other people; and some of you might find yourselves in the same need.
Vic, Hurray, !
-
Put my Micro Toolchest to the ultimate use, opening a package with another SAK in it.

-
@aefavant said:
I found a new use for the cuticle pusher this week, on my MiniChamp!Plucking staples out from paper sheets, envelopes etc.....
I'm very glad for this finding and would love to share with you guys, since here in the office it's common to "loose" the proper appliance for that for other people; and some of you might find yourselves in the same need.
I have tried several tools in both the Vic Explorer and the Minichamp for that purpose. For most staples I am sticking with that Minichamp's nail cleaner. The pointy tip helps a bit, especially with the smaller ones. I use it almost everyday at office.
-
Today I have made a small trekking tour. At a break I cut for meinen1 year-old son fruit pieces.
-
I found a new use for the cuticle pusher this week, on my MiniChamp!
Plucking staples out from paper sheets, envelopes etc.....
I'm very glad for this finding and would love to share with you guys, since here in the office it's common to "loose" the proper appliance for that for other people; and some of you might find yourselves in the same need.
I have tried several tools in both the Vic Explorer and the Minichamp for that purpose. For most staples I am sticking with that Minichamp's nail cleaner. The pointy tip helps a bit, especially with the smaller ones. I use it almost everyday at office.
I've found the can opener/small screwdriver tool on 84/91/93/111 mm Vics to be great for staple removal. I think the best approach with this tool is to go at the staple from the back, inserting the flat Phillips driver into one side of the staple (with the back of the can opener facing out), and then rotating the tool to bend that side of the staple to perpendicular with the paper. Repeat for the other side, then pop the staple out. Hopefully this makes sense; it takes a lot longer to explain than it does to do.
-
I used the Rogue's scissors for some mustache/stray beard whisker trimming.
-
Used the straight pin I'm my Explorer plus to push out the small pins in order to shorten a new metal wristband for an old watch.
-
I used my Climber scissors to clip the tags off my wife's new shoes and my Rambler scissors to clip the tags off a new lawn chair.
-
The farmers awl, it worked pretty good for starting the teacup hooks I had to hang! JR
-
I cut a piece of salami then cut my lip licking it clean

-
I used the cap lifter of my Ranger to open the control panel of the mast climber I was working on today.
It was the end of the day and I had to reset a breaker so my SAK helped me get home somewhat on time.Sent from my fancy work phone.
-
@nate j said:
I found a new use for the cuticle pusher this week, on my MiniChamp!
Plucking staples out from paper sheets, envelopes etc.....
I'm very glad for this finding and would love to share with you guys, since here in the office it's common to "loose" the proper appliance for that for other people; and some of you might find yourselves in the same need.
I have tried several tools in both the Vic Explorer and the Minichamp for that purpose. For most staples I am sticking with that Minichamp's nail cleaner. The pointy tip helps a bit, especially with the smaller ones. I use it almost everyday at office.
I've found the can opener/small screwdriver tool on 84/91/93/111 mm Vics to be great for staple removal. I think the best approach with this tool is to go at the staple from the back, inserting the flat Phillips driver into one side of the staple (with the back of the can opener facing out), and then rotating the tool to bend that side of the staple to perpendicular with the paper. Repeat for the other side, then pop the staple out. Hopefully this makes sense; it takes a lot longer to explain than it does to do.
Ha! Great to hear your experiences too guys!
-
Vic Compact.
File on hook to clean up a rough finger nail.
Scissors to trim threads.
Knife to cut up an apple for a snack. -
Climber today.
Can opener to tighten some philips screws at work, large blade to cut a piece of cake for dessert at lunch.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


