Minor mod, guidance (maybe help) needed
-
Detron,
JB Weld is good, and if you do intend to use 2 part epoxy, do take a close examination of their psi or rating. I have seen and experiment with some, and some of them do 'crack' easily.
-
That's gonna be a nice mod. Jb weld works great.
that's us mobile
-
An oxygen acetylene torch and braze them together?
-
Me too. I grew up with a machine shop at my disposal. Now I got nothing.
-
I've heard the magnet suggestion many times here... My Q is, if you attach the magnet to the inside of the bit driver, does this not interfere with the original stock double-sided bits from fitting in???
-
If the magnet is not to thick, it will work fine.
that's us mobile
-
Cool, thanks! :)
-
@sawman said:
I've heard the magnet suggestion many times here... My Q is, if you attach the magnet to the inside of the bit driver, does this not interfere with the original stock double-sided bits from fitting in???I am trying to not alter the actual driver in any way, mod the accessories, not the tool. It may not matter, but doing this mod as described below, I can also use this with any CyberTool.
-
Ah, make sence.
that's us mobile
-
@ducttapetech said:
Ah, make sence.that's us mobile
I like the idea of a small kit that can go in tandem with any CT I choose to carry
-
If welding the only clean solution you have for something like that is tig. You may go and ask a tig welder how much would it charge you for that.
You can try custom vehicle shops, places were they weld fire extinguishers, maybe pot and frying pans factories, etc.
Going straight to places were welders work gives you the possibility to be able to talk to the welder personally and in my experience they do it for very little money. Once i had a motorcycle swingarm fully welded by a welder on a frying pan factory who did an outstanding job and didnt even charge just because he had little to do that day

-
One question first do you really need that much reach? I mean, the CT drives has some decent reach already, so would adding the length of the extension really be neccesary?
What I was thinking was a bit different. I'd try to get the extension out of the adapter (not sure how it's attached/connected to it
) and JB Weld the extra bit you got straight into the adapter. Would make for a much more secure driver I think. I'll have to get me one of those kits and try if it can be done myself. -
@enki_ck said:
One question first do you really need that much reach? I mean, the CT drives has some decent reach already, so would adding the length of the extension really be neccesary?What I was thinking was a bit different. I'd try to get the extension out of the adapter (not sure how it's attached/connected to it
) and JB Weld the extra bit you got straight into the adapter. Would make for a much more secure driver I think. I'll have to get me one of those kits and try if it can be done myself.I plan on lopping off most of the extension, I do not need the length,(should have mentioned that I guess). I have thought about trying to remove the extension, I need a time to try that, but I have to wait for the weekend. I did not want to wait on posting and seeing what other thoughts people have that might help in my process
-
Through luck, I may have made this easier, and better!! write up coming, might take a while to write.
-
-
While waiting on my extra cybertool bit to proceed with my little mod, I decided to try to find a way to hold the extra bits. I went into Lowe's and found this for $6
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140313_171958.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140313_171958.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
not a bad price, but since all I wanted was the plastic bit holders, it was sort of expensive.
so I bought 2

anyway, I got home and opened one just to get to the bit holders and see how good/bad they were. they were just fine for what I wanted.
then I noticed this little part of the package
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140313_172019.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140313_172019.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
RATCHETING!!!!!!!
:D :ahhh this is perfect! if I can get it apart without breaking it.Step 1, remove the spinning palm rest
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140313_172045.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140313_172045.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Step 2, get the long extension that is included with this $6 purchase, which by the way uses a spring inside to hold the bits, rather tight (ever get a bit stuck in a bad screw and the grip on the bit was stronger than the magnet holding it in? I have!)
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140313_172120.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140313_172120.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Step 3, Drop it into the back end of the screw driver narrow end first
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140313_172132.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140313_172132.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Step 4, Hammer through to knock out the ratcheting mechanism (pay no attention to the hack sawed portion
)<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140313_172151.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140313_172151.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
now that the ratcheting mechanism is out, I will be using this for the mod, and the end that accepts the bits is magnetic.
the bit shown in this picture is the one I ordered for the mod<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140313_172321.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140313_172321.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I plan on putting it in the CT
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140313_172345.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140313_172345.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140313_172400.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140313_172400.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
and then ensuring I do not connect too far up the bit that it would interfere with the driver
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140313_172419.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140313_172419.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140313_172428.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140313_172428.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
this will give me a short adapter that can MAGNETICALLY hold my other bits, and it is 3 position ratcheting driver.
I feel for precision work this should hold up OK.I am going to wait for the bit I ordered to arrive before using some JB Weld, I will use which ever bit looks the worst.
the reason I started this whole thing was due to my desire to have access to more bits.
Bits will now be:
CyberTool comes with
Torx #8, #10, #15
Hex 4mm
Flat 4mm
Phillips #2
Pozidrive #0, #1These were removed from my add on set, so now added to the above is
Torx #4, #5, #6, #7, #9, #20
Hex .7mm, .9mm, 1.3mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 1/16", 5/64", 3/32", 1/8", 5/32"
Flat 1mm, 1/16", 5,64", 3/32", 1/8"
Phillips #000, #00, #0, #1
3 blade phillips 2mm, 3mmsince I bought 2 of these precision screwdrivers (Might go get 2 more) I have enough plastic bit holders to devise some system to carry the bits (or have them in my bag)
I am super excited to get the bit in so I can improve the accessories to my Technologist!!
-
I cant understand why Vic didnt offer more bits? I had looked several times for bits with no luck and had the wallworld one you have. I had thought of building up the shank part of the cheap extender then filing it down to fit the CT. I gave up I sure hope this works out.
-
@Aloha007 said:
I cant understand why Vic didnt offer more bits? I had looked several times for bits with no luck and had the wallworld one you have. I had thought of building up the shank part of the cheap extender then filing it down to fit the CT. I gave up I sure hope this works out.found out the set from Wallworld has loads of duplicates!
if I want 44 pieces, I do not want only 23 unique ones!! 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
