Which bit extender should I get?
-
The one that does not will fit the wave and the surge,
Really? I wonder if it would work with the Rebar.
Nothing does lol
-
The one with the tab is actually the (original) Tool Adapter; check this out. The one without the tab is the Universal Tool Adapter, and it's as universal as it gets...







(... and the list goes on...)
-
You want the top one. The bit extender! :)
-
If you are going to put a lot of force into anything (and you do have the heavy duty Surge, right ?) then IMO the universal tool adapter is much stronger (have a look at the thickness of the metal in the Surge bit holder and at the bottom of the bit extender and you'll see what I mean). Also the universal tool adapter works well with std 1/4 bits, the bit extender is a bit deep.
-
I use the top one, the bit extender, with my Surge. Works well. If I ever feel I'm over stressing it, I can usually go and grab a dedicated driver or more appropriate tool.
-
The one that does not will fit the wave and the surge,
Really? I wonder if it would work with the Rebar.
Nothing does lol
This is the one that fits the rebar

Its called the removable bit driver
http://www.leatherman.com/931012.htmlSent from my SCH-I605 using Tapatalk
-
I was wrong.
-
After you get the extender sorted then you'll need a ratcheting driver for it ;)

-
After you get the extender sorted then you'll need a ratcheting driver for it ;)
Is doing it that way better than getting the topeak ratchet?
There are so many options as to mini ratchets. I have a few ratchets, this was more of a fun mod to do tho surprisingly it works pretty good. I got a craftsman that works great and is pretty small. There is a good one kobalt that was $9 when I got it.
-
After you get the extender sorted then you'll need a ratcheting driver for it ;)
Is doing it that way better than getting the topeak ratchet?
There are so many options as to mini ratchets. I have a few ratchets, this was more of a fun mod to do tho surprisingly it works pretty good. I got a craftsman that works great and is pretty small. There is a good one kobalt that was $9 when I got it.
I had seen a post on here about a harbor freight version, but that it wasn't any good due to the plastic inside which was prone to breaking. Is there a benefit to having the standalone ratchets like the topeak or is the one in your original picture able to give the same benefits for less total weight?
-
I like stand alone in scenarios where I need to unscrew a bolt with a nut. I hold one side with LM and use stand alone on the other. I also like the stand alone when I need more torque and I like the 1/4 bits better than LM flat ones. I also like the stand alone in some situations when space is a premium.
I like ratcheting when I'm fussing with long or several screws/bolts. I have that Wrench for similar scenarios where my LM comes up short or where I need a second tool. The pouch I use to carry the back up gear is a CLC pouch and the wrench/ratchet/sockets/ 1/4 bits ride.
There are a few great threads on mini ratchets here on MTo but honestly I went the cheap route and got 2 kits for like $20. The Craftsman was $10 and the kobalt was $9 and came with bits and sockets. I had the extra sockets for the Craftsman. I also use a $3 L wrench that came with bits but I swapped them out for ones I use more often.
The extender for my Wave/Surge is great and works great. I made the mini ratcheting one for fun since I had the initial tool. I made a thread about it and there is a video of where I got the idea. Mine works great and I think it will last for what I use it for and plus the coolness factor of my LM having a rachet is nice.
-
@Aloha007 said:
The pouch I use to carry the back up gear is a CLC pouch and the wrench/ratchet/sockets/ 1/4 bits ride.There are a few great threads on mini ratchets here on MTo but honestly I went the cheap route and got 2 kits for like $20. The Craftsman was $10 and the kobalt was $9 and came with bits and sockets. I had the extra sockets for the Craftsman. I also use a $3 L wrench that came with bits but I swapped them out for ones I use more often.
Do you have pics or a thread about this setup?
-
Im sure I posted up something but here is a few set ups I have.
- L wrench with bits that ride in my niteize case with Surge.
- CLC pouch with adjustable wrench, craftsman mini ratchet and selection of sockets SAE only. I can clip this to my work belt if needed or grab just the adjustable wrench.
- Kobalt set rides in my truck. I'll grab the little ratchet since its small and put it in my niteize case if I think I may need it. 1/4 and 5/16 magnetic. A good selection of bit and metric and sae sockets.
- Ratchet mod was a fun project and is in my niteize case I did do a thread.

-
Thanks for those pics! Now I need to go hunt down and read that thread...

-
Kobalt, one of my favorite toy makers. Love there tools.
that's us mobile
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login