What Did You Use Your Multitool For Today?
-
I've been using my new BO PST for fiddling purposes this morning in an attempt to loosen it up some. I think it's working...
Have you tried a bath in boiling water,or a WD40 bath?
Might work on the PST too

No I haven't-does it work wonders on the joints?
As for the PST, does boiling water really help with the stiffness? It's mainly the plier pivot that is the issue at this point. I don't want to ruin the finish or anything, but it sounds like that wouldn't be a problem 
-
Twice today


-
I had to shorten the arms on my rotary airer in the garden. I've moved everything around and there was a little less space than before. After cutting the arms down with an angle grinder, I used a CT41 to file the inside of the hollow aluminium arms so I could get the plastic end stops back in, and a SOG Toolclip to crop off the excess washing line
-
Hi, Al.


-
He is alive :ahhh :ahhh
-
Used my LM ST pliers and AWL to fix a leaky sink.
-
Used the file on my Surge to smooth some sharp edges on a backhoe I was working on today. Love that replaceable file!!
-
Used my MP600 Urban Scout to help a co-worker dismantle half of his office desk and cabinets. This is the 3rd co-worker who has done this kind of office rearrange and each time my MT has been the tool of choice.

Funny thing was he thought we needed a powered screwdriver to undo everything. I pulled the MP600 out of it's pouch and deployed the pliers with a flick and 'snik' and calmly said "I got this".

-
@Toolslinger said:
Used my MP600 Urban Scout to help a co-worker dismantle half of his office desk and cabinets. This is the 3rd co-worker who has done this kind of office rearrange and each time my MT has been the tool of choice.
Funny thing was he thought we needed a powered screwdriver to undo everything. **I pulled the MP600 out of it's pouch and deployed the pliers with a flick and 'snik' and calmly said "I got this". **

Very cool 8)
-
Fixed some air lines.. ( Red hose, upper middle ) My boss found it quite odd taking pics ... lol

-
I used the Rebar, Spirit X, and Style CS to assemble a cabinet.
-
I've been using my new BO PST for fiddling purposes this morning in an attempt to loosen it up some. I think it's working...
Have you tried a bath in boiling water,or a WD40 bath?
Might work on the PST too

No I haven't-does it work wonders on the joints?
As for the PST, does boiling water really help with the stiffness? It's mainly the plier pivot that is the issue at this point. I don't want to ruin the finish or anything, but it sounds like that wouldn't be a problem 
I had a problem at one point with my BO Mini,and the wise ones of the forum advised the boiling bath...worked a treat. There's a thread about it somewhere

-
Used my surge to cut some wire and unscrew some from a breaker box.



that's us mobile
-
I've been using my new BO PST for fiddling purposes this morning in an attempt to loosen it up some. I think it's working...
Have you tried a bath in boiling water,or a WD40 bath?
Might work on the PST too

No I haven't-does it work wonders on the joints?
As for the PST, does boiling water really help with the stiffness? It's mainly the plier pivot that is the issue at this point. I don't want to ruin the finish or anything, but it sounds like that wouldn't be a problem 
I had a problem at one point with my BO Mini,and the wise ones of the forum advised the boiling bath...worked a treat. There's a thread about it somewhere

Cool, maybe I'll try that tonight then. Thanks buddy

-
I used my rebar the other day to install a new window in my brothers jeep cherokee. He got robbed at a gas station while he was inside, some homeless guy busted in the window and stole a bag of chips and some gatorade.
The rebar saw some use in removing the door panel from the inside, and prying the weatherstripping from the frame without damaging it all. I almost got the whole job done with just the rebar, but the window regulator had some really tight bolts my pliers just couldn't handle.
-
Opened a couple boxes today at the shop containing new cigar inventory using my Rebar main blade and Zino blade. I also cut a few cigars with the Zino's cigar cutter :D
-
LM OHT to remove pieces of broken ceramic from the dishwasher filter.
Pliers on my MP600 to uncouple a waterline to a faucet to clean the mesh filter and then reattach it.
-
LM Croc to scrape stickers off of a fork on a bike that I'm restoring for a buddy, wants to try out mountain biking with me.
-
Not much today :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login