County Comm Versadriver
-
The County Comm Versadriver is a decent basic hex driver in a pouch, but it is difficult to put any real torque on. This can be a problem, but at $10 it's still worth a look. I have a couple other simple hex driver tools I'll compare it to - the Wiha 79243 Bits Selector, & a Sears bit driver I bought several years ago in a Christmas display.
-
Here's the basic driver with its pouch. The pouch has a belt loop on it & is made of heavy rubberized nylon. You get the tool, a square to hex converter gnurled for finger gripping, an extension, & 11 bits (4 slotted, 3 Phillips, 3 hex.
-
The tool has divots in 3 places for the square driver to click in to - end, side, & almost to an end. These are handy, but because of the spring-loaded bearing that seats in these, when you push against a screw the bearing rolls out of the divot & the square driver can spin. this is the basic problem with the tool. So you have to put your fingers onto the gnurled converter to make sure the square driver doesn't spin.
-
The tool can be used with the square driver in one of the 3 positions shown here to get more torque on a screw.
-
You can also use the extender.
-
It all fits into the carrying pouch with room to spare.
-
Here are the other two bit drivers for comparison.
-
The Wiha can be had for just a little over $10 & has TORX drivers. Wiha makes many of these variations even with security bits. you can put any bits in the holders of course that you like. The extender is fitted into plastic (a weak point), but you can get pretty good torque on the driver, & I've used these for years on all kinds of projects.
-
The Sears bit driver is cheap & useful.
-
It even has a magnetic strip to hold it onto metal surfaces.
-
So do I like the County Comm Versadriver? Yes & no. It is a great idea, but unfortunately is difficult to put torque on because of the bearing design.
I'd give it a 3 out of 5.
Tom
Here are links to the Versadriver & Wiha Bits Selector. The Sears bit driver is a seasonal item that I'm sure you can find many versions of online.
-
I gotta add a link to the other Wiha bit drivers. I really like their tools.
http://www.wihatools.com/pro_BitSets.htm




-
Thanks for the info Tom. I like all the pictures, they really are worth a thousand words. (that one close-up pic showing the ball plunger engaged in the detent came out very nice!)
The Versadriver looks like it would be a handy thing to have around. Too bad it has an Achilles Heel. Does it seem like simply going with a stronger ball-plunger (to keep the square driver from rotating) would solve the problem? Or perhaps deeper indents in the driver ring?
-
The better way to do it would be to have the detents on the inside so that you're not pushing against the bearing while pushing against the driver. The other way would be to have the biner be hex shaped where the three points of use are. You can understand how frustrating it is to be bearing down on a screw & have the square driver rotate on you.
-
@Tom Munch said:
......You can understand how frustrating it is to be bearing down on a screw & have the square driver rotate on you.......OUCH!
@Tom Munch said:
..........The other way would be to have the biner be hex shaped where the three points of use are......Ha! I was thinking the same thing!
-
Another way would be like the Wenger locking screwdrivers. You could have a groove that would engage when you bear down on the driver that would lock the square driver in place rotationally.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login