Show off your Sak mod's!
-
Looks just like the finish I have been carefully removing from my beater SAK's to make them look like new.
Maybe we should just send each other a package of knives that are in the "pre-worked-on" state
-
@hiraethus said:
Turned the threaded pins, milled the scales thinner (it's no longer a Plus, more like a standard Alox) and managed to get the knife together tonight.Took forever to assemble though - one of the holes in the scales is out of position and the screws are too long. I had to use a washer that was too thick between the knife blade and the scale so need to find some 0.2mm brass shim to make a thinner one. Finally, I need to find somewhere to hard anodise the scales for me.
Nice work. :hatsoff: Looks really good assembled.
As for the anodizing, are you thinking clear or color anodizing? I like the looks of this silver one and wouldn't add any color to it for your first go.
-
Thanks. A bit of fettling and filing tonight and I was able to get it together quite easily. I've re-fitted the outer liners under the scales too and I'll see if I can cut the grooves in the scales for the toothpick and tweezers at work tomorrow.
I quite like the silver, but black is better. I like black. 8)
-
-
Victorinox OH Trekker Plus with plain edge and scissors



:)
-
Now that's exaclty what I plan to do. I just haven't got around to do it.
You drilled all the "Outrider"-Parts to 3mm, right? -
@ crackout: Yes. Because the OH-blade has a 3mm hole, I drilled the saw, scissors and can opener also to 3mm to make ist work.
Best regards,
Chris
-
Excellent looking mod.
My favorite 111mm +OH blade.I'd call it a OH Outrider though. :D
-
What's the strange, small, hook just past the scissors tip in the first photo? Looks to be in the same layer.
The opened knife doesn't seem to show anything like that hook. -
@neillcurrie said:
What's the strange, small, hook just past the scissors tip in the first photo? Looks to be in the same layer.
The opened knife doesn't seem to show anything like that hook.That's part of the phillips screwdriver, to help with extraction. The phillips rides underneath the scissors, so you first have to open the scissors to get to it and then it's too low to grab it so you use this "hook".
-
Ahhhhh, thanks. I see the end of the hook, opened, in the third pic now.
-




Sent from my iPhone using Tapatalk
-
-




Sent from my iPhone using Tapatalk
Those scales look like carbon fiber. Are they?
lightning strike carbon fiber.
-
lightning strike carbon fiber.
I've been wanting to do carbon fiber scales on my Swiss Champ for a while now. A thing of beauty there

It was far easier to work than I thought. I will be ordering some thinner carbon fiber for 91mm mods next.
-
@hiraethus said:
Slow, slow progress but the scales are finally sanded and polished and ready to send to the anodizer (who will slip them into the next run of black for a very reasonable sum):

Nice.
You'll still need to use liner though so the T&T don't fall out. I'd try to make the T&T grooves ride on the same scale, like on the Plus scales, just not pen and tooothpick but toothpick and tweezers. That way you'd only need the liner on one side. -
@enki_ck said:
Nice.
You'll still need to use liner though so the T&T don't fall out. I'd try to make the T&T grooves ride on the same scale, like on the Plus scales, just not pen and tooothpick but toothpick and tweezers. That way you'd only need the liner on one side.Yep. I milled down the scales to make them thinner, planning to use them without liners, then didn't like the way the corkscrew extended a long way past the scale. So I put the liners back in and decided to cut the grooves for T+T. What I should have done is make the shield side scale thin (2mm or so) and used no liner and then tried to get the T+T into the corkscrew side, with a liner. Every day is a school day. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


