And so it begins.... (My adventures into Alox!)
-
@Reinier said:
Many? I always thought I owned the only two Syph007 custom SAKs in the country :ahhhNope! By my reckoning there are at least 10 in your country. :D
For overseas orders Germany is close to number 1 for me, then Britain, and The Netherlands.
Its about an even split for orders going the US and the rest of the world. Maybe 5 or so in my own country. :D
-
Hmmmmm, that's interesting… Maybe gonna think it over. Interested in the one with usb you're making right now.
-
Finally a custom with orange! :D
This one also has one of the Ver 2.0 backsprings and Im very please to saw that they work excellent, and most importanly the tweaks I made to the inner profile made finishing them much easier.
Ive also got a new sanding / buffing machine white made finishing the back springs much faster. I think I should be able to pump out the standard mod configurations faster now.
Oh and this configuration I love. For me the ultimate urban carry. Metal saw instead of wood saw, scissors and phillips added to a farmer.








-
@Syph007 said:
Finally a custom with orange! :DThis one also has one of the Ver 2.0 backsprings and Im very please to saw that they work excellent, and most importanly the tweaks I made to the inner profile made finishing them much easier.
Ive also got a new sanding / buffing machine white made finishing the back springs much faster. I think I should be able to pump out the standard mod configurations faster now.
Oh and this configuration I love. For me the ultimate urban carry. Metal saw instead of wood saw, scissors and phillips added to a farmer.








That's nice and thick.
Sent from my HTC One X using Tapatalk
-
Hey man ... had to register so I could post on your thread. Man you do some absolutely gorgeous work!
I'm extremely interested in modding a few SAKs of my own and there is a TON of useful information here. I'm only on page 23 and can't wait to have time to finish the rest of it.
From what I'm seeing, it would be cheaper in the long run for me to source some brass liners instead of using the stock ones so that I can make tools of different widths without having to spend a ton to rob liners out of other knives.
For your scissor backsprings, what steel are you using? Did I read correctly that you use 440? Is that A, B, or C? I think I found a company that will waterjet them for me, I just need to come up with a template for them. I'm still looking for an anodizer so I can put some color in my work!
From what I can tell, the best way to put scissors in a 93mm is to get a Solo and do some modding to the blade's backspring? I haven't seen exactly what needs to be done to it yet. Can anyone provide a little help on that? I would love to be able to put my Farmer back in my pocket with scissors instead of a saw. It's in a million pieces right now waiting to be put back together. :) I have a very limited amount of pivots so I want it to be perfect before I start cutting on them!
I have almost everything I need from knifekits. I forgot to add washers to my cart, but after going back and looking it doesn't look like they have any 1/8th ones anyway. I've already taken apart 4 Pioneers and drilled 1/8" pivot holes in them along with a Farmer, and an Explorer (only to find out the Explorer with the gray mag has the longer inline Phillips!!). From what I'm reading you guys extend the pivot barrels into the actual scales. I need to look into doing that. Right now all I've done to my practice SAK is to countersink the middle hole so the torx screw sits flush.
The final part is just acquiring the Alox knives. I can get Farmers on Amazon for $30. Is there a local MT guy that sells them cheaper? I would love to support a local guy if I can.
I love getting my hands dirty and for whatever reason working with these SAKs is very soothing.
Thanks for all the crazy information you're laying on us Syph!!
-
Another
Syph! Great job! JR -
That's a really good one Syph
Love the metal saw instead of the wood saw. -
gorgeousNice work.
-
Nice. If I'm not mistaken that's just the cap lifter and Phillips, no can opener. Don't think I've seen pics of that mod before.
-
-
Nice. If I'm not mistaken that's just the cap lifter and Phillips, no can opener. Don't think I've seen pics of that mod before.
Yup Ive done a couple like that and its a nice option to keep it as slim as possible, but to keep a phillips.
That, and it makes it possible for the screwdrivers to be in the middle :)
-
Nice. If I'm not mistaken that's just the cap lifter and Phillips, no can opener. Don't think I've seen pics of that mod before.
Yup Ive done a couple like that and its a nice option to keep it as slim as possible, but to keep a phillips.
That, and it makes it possible for the screwdrivers to be in the middle :)
Right! That was a benefit, and also the phillips driver doesnt hit the scale and chip it!
-
@875fps said:
Hey man ... had to register so I could post on your thread. Man you do some absolutely gorgeous work!I'm extremely interested in modding a few SAKs of my own and there is a TON of useful information here. I'm only on page 23 and can't wait to have time to finish the rest of it.
From what I'm seeing, it would be cheaper in the long run for me to source some brass liners instead of using the stock ones so that I can make tools of different widths without having to spend a ton to rob liners out of other knives.
For your scissor backsprings, what steel are you using? Did I read correctly that you use 440? Is that A, B, or C? I think I found a company that will waterjet them for me, I just need to come up with a template for them. I'm still looking for an anodizer so I can put some color in my work!
From what I can tell, the best way to put scissors in a 93mm is to get a Solo and do some modding to the blade's backspring? I haven't seen exactly what needs to be done to it yet. Can anyone provide a little help on that? I would love to be able to put my Farmer back in my pocket with scissors instead of a saw. It's in a million pieces right now waiting to be put back together. :) I have a very limited amount of pivots so I want it to be perfect before I start cutting on them!
I have almost everything I need from knifekits. I forgot to add washers to my cart, but after going back and looking it doesn't look like they have any 1/8th ones anyway. I've already taken apart 4 Pioneers and drilled 1/8" pivot holes in them along with a Farmer, and an Explorer (only to find out the Explorer with the gray mag has the longer inline Phillips!!). From what I'm reading you guys extend the pivot barrels into the actual scales. I need to look into doing that. Right now all I've done to my practice SAK is to countersink the middle hole so the torx screw sits flush.
The final part is just acquiring the Alox knives. I can get Farmers on Amazon for $30. Is there a local MT guy that sells them cheaper? I would love to support a local guy if I can.
I love getting my hands dirty and for whatever reason working with these SAKs is very soothing.
Thanks for all the crazy information you're laying on us Syph!!
Hey there. :D Well you did have to register on THE best forum for SAK enthusiasts if you are that interested in SAKs and modding this is the place to be!
If you need a few extra stock alox liners to avoid cannibalizing new alox for liners I can help you out there. I have quite a few spares and I probably only use stock liners for half my builds.
I dont think knifekits carries 1/8" washers, but usaknifemaker does. Ive also bought msc things from texasknife and knifemaking.com (jantz)
I make my own washers now from shim stock since I need smaller OD ones then any place sells anyhow. :D
-
I'm stripping 90 scales today, so I set out to test that new anodize remover (the commercial grade stuff) I got in last week. Its a chromic and phosphoric acid blend. Well Im glad I only tested it on one scale. It did a garbage job, took forever and didnt even take off all the anodize.
Soooo forget that and $60 wasted. Im going back to Straight 30% NaOH solution with my secret catalyst. I can strip scales in about 30 seconds if I keep the solution hot. Yes sure its more dangerous.. but results are more important!
-
@Syph007 said:
Finally a custom with orange! :DThis one also has one of the Ver 2.0 backsprings and Im very please to saw that they work excellent, and most importanly the tweaks I made to the inner profile made finishing them much easier.
Ive also got a new sanding / buffing machine white made finishing the back springs much faster. I think I should be able to pump out the standard mod configurations faster now.
Oh and this configuration I love. For me the ultimate urban carry. Metal saw instead of wood saw, scissors and phillips added to a farmer.








That is my perfect tool load out and that colour is
.
I want one bad now. PM incoming! -
It's the same color as my car so I need one too!
-
I've been straining my brain to get some progress on my website www.sakmodder.com
It's getting there. I figured out how to get the popup image things to work. Im now trying to organize all my customs by size and type and list everything on there for people to browse through.
Luckily irfanview has some great bulk image processing modes to add watermarks etc so I think I can get it to work without too much pain.
If I can figure out how, I really want to have some sort of SAK config wizard to help people figure out what is possible in a custom. I used to do web work for a living but that was over 8 yrs ago so alot has changed since then and Im pretty rusty.
I put a link to Gamble's kickstarter campaign there since he did a nice photoshoot with one of my Ti minichamps.

-
Im working on prepping another batch of scales for hard anodize.

I tried to show in this picture how the stock scales look compared to the final anodize.
If you've ever inspected the inner edge of an alox model they are quite rough. You can kind of see what I mean on the far left pic. After I strip them down the jagged edge is very apparent. I sand and buff them so they are nice and shiny smooth, and then when anodized no rough edges.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
