Texas Tool Crafters.
-
My favorite of those is your gold Wave :D
-
@Chako said:
I gather from this that those laser etched models were not made in any great number, and possibly will become collector pieces in their own rights?I guess that depends on whether they get popular with collectors or not. I tend to collect tools as they were made by the original manufacturer, not those altered by an after-market modder (although I do keep on looking at the 24K gold Skeletool
)I see that they are now calling themselves TX Tool Mods.
-
That I have noted as well. Yes, it looks like these might become rare sooner than later unless they continue producing them. With Leatherman, I will collect anything related to them. All else, I tend to stick with non modded tools myself.
That gold skeletool is very nice. My only regret, was my first tool I bought off of them, the gold covered Wave seen in the upper right. I did not like that they plated everything including the file. That makes it more of a shelf queen and a non-user to me...not that any of these will see any use. Just the concept sort of rubbed me the wrong way. The biggest reason why I stayed clear of all their other 100% gold covered examples since.
EDIT: Well except for that black and gold Wave. That colour combination is just striking and I couldn't refuse it.
-
@Chako said:
That I have noted as well. Yes, it looks like these might become rare sooner than later unless they continue producing them. With Leatherman, I will collect anything related to them. All else, I tend to stick with non modded tools myself.That gold skeletool is very nice. My only regret, was my first tool I bought off of them, the gold covered Wave seen in the upper right. I did not like that they plated everything including the file. That makes it more of a shelf queen and a non-user to me...not that any of these will see any use. Just the concept sort of rubbed me the wrong way. The biggest reason why I stayed clear of all their other 100% gold covered examples since.
Dan, how does that gold plating affect the diamond file? Does it render it useless?
-
No, the gold plating is very thin. On their web site, they state 10 microns. That isn't thick enough to render the file useless. However, I would imagine the plating wearing off of it right quick with use. I am not going to test how durable that finish is however.
-
I might share the same concern about the saw being plated...
-
Agreed. I view the waves as something akin to a special occasion dress MT. More for show than a user.
-
@sawman said:
I might share the same concern about the saw being plated...I saw a picture of a gold plated Charge MT recently (http://www.ebay.com/itm/301125520738 ) and the gold plating had started to rub off in a couple of places (presumably from being opened and folded back into the handles) - it didn't look very attractive.
I can imagine some people using a gold-plated MT as an every day user, but most probably end up as shelf queens ( I know that would be the fate of any I got).
-
That type of gold plating is purely decorative. It will wear off very easy as its soft and very thin. Its not an expensive process to do. Just about any jeweler will have a gold coating dip tank, or buy your own and coat everything you have in gold. Gold is for jewelery not tools. DLC / cerakote / anodizing / Black oxide etc is for tools.
If you want yellow tools, gold colored TiNi would be more appropriate.
-
I agree. They do look nice though.
-
And here I was thinking somebody was just really fed up with their Leatherman tools rusting... ;)
-
I might share the same concern about the saw being plated...
I saw a picture of a gold plated Charge MT recently (http://www.ebay.com/itm/301125520738 ) and the gold plating had started to rub off in a couple of places (presumably from being opened and folded back into the handles) - it didn't look very attractive.
I can imagine some people using a gold-plated MT as an every day user, but most probably end up as shelf queens ( I know that would be the fate of any I got).
That's Samo's listing. He's a member here also. Haven't seen him in a while though. I'd love to hear some thoughts from him on how the tool behaved with that coating.
That's the same model that LM ordered from TTC for their 30th Anniversary Charge, just without Tim's signature and not numbered.
I think Aloha has one of the gold plated Rebars, just not sure if it's a user. Oh, Aloha, any thoughts?

;)
-
In the automotive stamping business a long time ago, I was responsible for sending out to die tooling to be gold or blue coated. I had thought it is the same process based on the coating thickness mentioned but could be wrong because the stuff we had done was very, very wear resistant to make the die tooling last alot longer!
@Syph007 said:
That type of gold plating is purely decorative. It will wear off very easy as its soft and very thin. Its not an expensive process to do. Just about any jeweler will have a gold coating dip tank, or buy your own and coat everything you have in gold. Gold is for jewelery not tools. DLC / cerakote / anodizing / Black oxide etc is for tools.If you want yellow tools, gold colored TiNi would be more appropriate.
-
Hmmm was it coated with actual gold though or something gold colored (like TiNi), or gold with Nickel added? Gold's best physical properties are electrical conduction, malleability and low reactivity. So gold in circuit boards and high end wires and connections makes sense, but on tools I never thought it had much benefit?
@sir_mike said:
In the automotive stamping business a long time ago, I was responsible for sending out to die tooling to be gold or blue coated. I had thought it is the same process based on the coating thickness mentioned but could be wrong because the stuff we had done was very, very wear resistant to make the die tooling last alot longer!That type of gold plating is purely decorative. It will wear off very easy as its soft and very thin. Its not an expensive process to do. Just about any jeweler will have a gold coating dip tank, or buy your own and coat everything you have in gold. Gold is for jewelery not tools. DLC / cerakote / anodizing / Black oxide etc is for tools.
If you want yellow tools, gold colored TiNi would be more appropriate.
-
I would go for the gold colored TiNi but never real gold on a MT. Those PVD coatings doesn`t rub off and they are made for heavy use because they were intended as a wear protection on, for example, milling cutter, drill, thread cutters and for engine parts.
And they look great :D
-
From my understanding it was real gold called Tin and the blue coating was Ticn. It was so thin in u microns though so it didn't add to the tooling size.
The company that did it was called Balzer tool coatingm if I remember right. :)@Syph007 said:
Hmmm was it coated with actual gold though or something gold colored (like TiNi), or gold with Nickel added? Gold's best physical properties are electrical conduction, malleability and low reactivity. So gold in circuit boards and high end wires and connections makes sense, but on tools I never thought it had much benefit?In the automotive stamping business a long time ago, I was responsible for sending out to die tooling to be gold or blue coated. I had thought it is the same process based on the coating thickness mentioned but could be wrong because the stuff we had done was very, very wear resistant to make the die tooling last alot longer!
That type of gold plating is purely decorative. It will wear off very easy as its soft and very thin. Its not an expensive process to do. Just about any jeweler will have a gold coating dip tank, or buy your own and coat everything you have in gold. Gold is for jewelery not tools. DLC / cerakote / anodizing / Black oxide etc is for tools.
If you want yellow tools, gold colored TiNi would be more appropriate.
-
Gotcha. Ya those arent gold, but often called gold coating since they are gold colored.
TiN - Titanium Nitride (gold)
TiCN - Titanium Carbonitride (blue)@sir_mike said:
From my understanding it was real gold called Tin and the blue coating was Ticn. It was so thin in u microns though so it didn't add to the tooling size.
The company that did it was called Balzer tool coatingm if I remember right. :)Hmmm was it coated with actual gold though or something gold colored (like TiNi), or gold with Nickel added? Gold's best physical properties are electrical conduction, malleability and low reactivity. So gold in circuit boards and high end wires and connections makes sense, but on tools I never thought it had much benefit?
In the automotive stamping business a long time ago, I was responsible for sending out to die tooling to be gold or blue coated. I had thought it is the same process based on the coating thickness mentioned but could be wrong because the stuff we had done was very, very wear resistant to make the die tooling last alot longer!
That type of gold plating is purely decorative. It will wear off very easy as its soft and very thin. Its not an expensive process to do. Just about any jeweler will have a gold coating dip tank, or buy your own and coat everything you have in gold. Gold is for jewelery not tools. DLC / cerakote / anodizing / Black oxide etc is for tools.
If you want yellow tools, gold colored TiNi would be more appropriate.
-
TiN is Titan nitride and Ticn is Titan/Carbonitride......no gold. Btw I`ve worked for Oerlikon Balzers Coating for over 12 years :D
UUpps, to late.......Syph007 was a little bit faster

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login