Squirt modification
-
I've never really cared for the SAK's. But I have to admit I never really looked at them. On the other hand I never was a real MT guy either untill I needed some sort of tool for my work and encountered by accidant my current wave.
I think that was one of the best investment of my life (besides my girlfriend that is ;)) That's why I'm more of a MT guy than a SAK guy. Especially Leatherman, it just never lets me down!But I don't want to be narrow minded and open for everything. Do you have any SAK in particular in mind?
-
Hmmm, can't really think of anything that would fit the bill. Nothing that small at least.
The Wave is a great tool and if you're used to carrying it, you will miss the easy opening one hand blade and the strong pliers switching to a SAK IMO.
Vic still doesn't have the all in one package available in the multitool format. That said, I like the Spirit better than any other multitool even without the one hand opening blade.
Ben, Sounds like a lot of taps but each pin only takes about 1 minute to peen once you get the swing of things.
-
I never had a Spirit in my hands but it seems like a well made tool as well. But as you pointed out, I really need a one hand opening ( and closing) knife. On boats the first thing you learn is that one hand is for the boat and one for your self. You don't want to fall overboard :D
The pliers on a squirt are not that great either when you look at it but they seems surprisingly functional in my experience.It looks like I'm back at making something myself. The riveting earlier mentioned is not the way to go in my head, but if you have experience with that I like to hear it. It would make thing a lot more simple.
-
The knife pivot is at the pliers end of the Juice...I have my doubts about the shear strength of the brass pin stock that we use for SAKs for a Juice mod. A magnet tells me that the Juice pins are steel.
-
-
This is what I have so far. Don't laugh, it's my first attempt :D And I'm not exactly sure what I'm doing





-
Ahh, it makes sense now with pictures. That is quite a project. Do the screws not work properly as pivot pins?
-
No the screws does not have the right diameter. If I remember it correct the pin hole is 3.2 mm and as far as I know there are no screws with that diameter. At the moment I use hollow brass tube that fits exactly in the hole, tapped tread in it and used M2 screws to bold every thing together.
And to make things more easy :ahhh I had to find something to keep it together at the knife tip end that fits flush. So that the knife, which is a bit longer than the original knife, can be closed. If you know what I mean...
But I keep thinking back about the riveting option

-
@zepla said:
And to make things more easy I had to find something to keep it together at the knife tip end that fits flush. So that the knife, which is a bit longer than the original knife, can be closed. If you know what I mean...Yes I see what you mean.
@zepla said:
No the screws does not have the right diameter. If I remember it correct the pin hole is 3.2 mm and as far as I know there are no screws with that diameter. At the moment I use hollow brass tube that fits exactly in the hole, tapped tread in it and used M2 screws to bold every thing together.3.2mm equals 1/8 inch American. What you need then would therefore be #5 screws. They are not commonly available even here, but can be found.
-
I see what your doing now! That actually looks like a great idea!
-
Yeah, that's what I tought :D
@ J-sews, #5 srews? I'm not sure if those can be found overhere. At least I did not found anything that would fit snug. But if I ever find them, you suggest just a screw through the squirt and a bolt at the otherside? That's would be the best option I guess. That way I can take it apart if I want to clean it or something like that. But where can I get those right size nuts and bolt?
(Sorry, just thinking out loud)BTW, any thoughts about a knife locking mechanisme?
-
Doh! I was thinking the Juice this whole time
...the Squirt is a pretty tiny platform to try to fit a lock into.My thought was that the Ladybug blade and locking mechanism could be re-housed between thinner stainless steel liners shaped to match the profile of the Juice handle and bolting it on the side. That would make it unnecessary to take apart the tool...you would just need to drill and tap a couple of mounting holes.


-
Couple more pics...


-
@SporK said:
Doh! I was thinking the Juice this whole time
...the Squirt is a pretty tiny platform to try to fit a lock into.Yes, I know now! And that's is exactly what I like about the squirt. It is for me the perfect pocket toy. Only thing missing is a decent locking knife in mho. But thank you for thinking with me. I'm almost getting the feeling that it can't be done :( At least not with my skills and equippment... :'(
-
@zepla said:
Yeah, that's what I tought :D@ J-sews, #5 srews? I'm not sure if those can be found overhere. At least I did not found anything that would fit snug. But if I ever find them, you suggest just a screw through the squirt and a bolt at the otherside? That's would be the best option I guess. That way I can take it apart if I want to clean it or something like that. But where can I get those right size nuts and bolt?
(Sorry, just thinking out loud)BTW, any thoughts about a knife locking mechanisme?
Yes #5 screws are exactly 1/8" diameter (3.2mm). You would need two screws and two nuts. Although I do not know what you can do about the knife blade being too long.....other than to grind it shorter.
Also it will be difficult to make the knife lock open. The "memory steel" you mentioned is called spring steel in English. Perhaps you could get a small piece from some other device, like a spring clip for office supplies.

-
Ah ha, "spring" steel. That makes sence :D
About those #5 screws I'll find them, I'm sure. I found some Dutch knife makers on the internet. They should have a few laying aroud I suppose. But smart thinking J-sews, regarding the spring steel. I already looked around the house and couldn't find anything I could use. But tomorrow I'm back at the office, there should be something I can use.
In the mean time I've gazed at the squirt for quit some time now and perhaps I should try something completly different. Not sure what, perhaps make entirely new handles and just use the pliers from the Squirt. I like the spring loaded pliers and the size of the total package. Or, I do have a spyderco dragonfly laying around, little bigger but very light as well, perhaps that will combine somehow with the pliers and will make a good plan B. But Leatherman and Spyderco do not come cheap over here so can't screw that one up like it looks like I'm doing right now with the Squirt :ahhh
Well, first we'll see what I can dig up at the office...
-
@zepla said:
Ah ha, "spring" steel. That makes sence :DAbout those #5 screws I'll find them, I'm sure. I found some Dutch knife makers on the internet. They should have a few laying aroud I suppose. But smart thinking J-sews, regarding the spring steel. I already looked around the house and couldn't find anything I could use. But tomorrow I'm back at the office, there should be something I can use.
In the mean time I've gazed at the squirt for quit some time now and perhaps I should try something completly different. Not sure what, perhaps make entirely new handles and just use the pliers from the Squirt. I like the spring loaded pliers and the size of the total package. Or, I do have a spyderco dragonfly laying around, little bigger but very light as well, perhaps that will combine somehow with the pliers and will make a good plan B. But Leatherman and Spyderco do not come cheap over here so can't screw that one up like it looks like I'm doing right now with the Squirt :ahhh
Another thought. How about 1/8 dowel pins. Easy to soften so you can file. Two ten thousands over size so can make a tight very strong pivot. For the ends, two brass bushings which can be riveted into or just Loctite in the bushing. I have spring steel .025 or .63 mm. a bit under 10mm wide, very strong. If you would like to try this I will make the brass bushings and mail you a piece of spring steel the length you need along with the dowel pins which I will soften. Email me if you want to try.
Richard
Well, first we'll see what I can dig up at the office... -
Are you kidding me, send something over?
That sounds great!But before I ask something like that I'll check out our office supplies first and see if I can make something work myself. And meassure that pin hole exactly, or are you sure that it is the 3.2 mm I think it is?
-
@zepla said:
.........or are you sure that it is the 3.2 mm I think it is?I can't be absolutely certain, but it would make sense. Leatherman is an American company, and 3.2mm (1/8") is a standard size that pin stock would be available in. The next bigger size would be 3.9mm, the next smaller size would be 2.4mm.
-
I can't be absolutely certain, but it would make sense. Leatherman is an American company, and 3.2mm (1/8") is a standard size that pin stock would be available in. The next bigger size would be 3.9mm, the next smaller size would be 2.4mm.[/quote]
That does make sense indeed.
BTW, thank you all for the support :) I really think now it can be done now in a fashion that it works and looks nice. If everything works out allright with this proto, I'll go out and look for a new sheepfoot ladybug and squirt to modify because the one I have is not perfect anymore. Damn the dremel and my not so steady hand :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login