NutSAK's carry stuff
-
Today's selection is:
GEC Northfield #66 Mink (Bullwinkle J Moose), burnt stag
Peak LED Solutions Pacific brass hi power

-
Nice slippie.
that's us mobile
-
Classy looking carry you have going on. The GEC bullwinkle is very cool and that light is
. -
I feel naked without a certain minimal amount of gear whenever I leave the house. I recently swapped the Wave over for EDC'ing my Rebar since it has more fiddle-factor. I hope I don't run into a situation where I need a bit kit but I can always buy the adapter and carry that too.
-
@sawman said:
I feel naked without a certain minimal amount of gear whenever I leave the house. I recently swapped the Wave over for EDC'ing my Rebar since it has more fiddle-factor. I hope I don't run into a situation where I need a bit kit but I can always buy the adapter and carry that too.Me too, but it is working fine here at the office. I'm sitting 3 feet away from my briefcase containing a CT41 & ST200. Even if I'm in another room, I have access to those within a minute. So far I haven't needed them at all, but time will tell.
I must say it's comfortable to just have a nice light and slippie on my person. It makes for light carry. I've always felt "naked" without a SAK in my pocket, as I've carried one for 30 years but, it is rare here at the office that I use anything on that SAK but the blade. I finally have realized that I now have an excuse to carry a nice slippie. A well-made light and slipjoint offer plenty of fiddle factor for me.
-
@Aloha007 said:
Classy looking carry you have going on. The GEC bullwinkle is very cool and that light is
.Thanks. Though I've owned several brass Peaks over the years, I have mixed feelings about brass as a flashlight material. It is a beautiful metal and feels great in the hand, but I would reserve it for smaller AAA lights. The weight of a AA or larger bodies like this one does not mix well with the softness of brass when it slips out of your hands and onto concrete or tile. There are several marks on the tail of this one to illustrate my point. I have an aluminum/HA Pacific identical to this brass one that weighs half as much (50 grams HA vs. 103 grams brass with 14500 cell). It has been carried more and doesn't have a mark on it. But, it isn't as pretty. :-\
-
I have mixed feelings myself about the patina they develop. I really like the beautiful shiny brass vs the patina so I can see myself obsessively cleaning the light. Thanks for the AA vs AAA comparison, I run eneloops in my lights and while I like to think I'm AA light user I have more AAA ones.
-
@Aloha007 said:
I have mixed feelings myself about the patina they develop. I really like the beautiful shiny brass vs the patina so I can see myself obsessively cleaning the light. Thanks for the AA vs AAA comparison, I run eneloops in my lights and while I like to think I'm AA light user I have more AAA ones.I think the patina is what attracts me to them. Brass is sort of a "living" thing, and it's constantly changing in appearance. I don't like it completely tarnished, but I like it polished and especially with a slight patina like the pics above. I only break out the polish when the patina becomes too developed, but that can be avoided by simply using a clean cloth to wipe the skin oils off before it's put away. Carrying the light in a pocket keeps it fairly well polished.
Here is a pic of that light just after I've freshly polished it. I like it this way, but I really prefer the light patina it has right now.

-
I like the look in those pictures. I guess in going thru a shiny stage :-\ I've polished my Wave, Surge and a Japanese PST. I like the patina to an extent as the brass does look warmer and that little AAA like is very attractive.
-
As expected, Thursday's flashlight/slipjoint pairing fit the bill at the office. The Pacific lit up the areas behind workstations and servers with aplomb, and Bullwinkle sliced open packages with the determination of a moronic moose. No other tools were used.
Friday's selection:


Queen Cutlery pattern #51 Trapper Jack, D2 tool steel & birdseye maple scales.
Peak LED Solutions McKinley SS, snow white 5mm LEDs x7 -
Those two go together very well.
Sweet handles on that slippie.that's us mobile
-
@ducttapetech said:
Those two go together very well.
Sweet handles on that slippie.that's us mobile
Thanks! It's usually pretty difficult to get a good photo representation of what the BEM scales look like, but I think my phone did fairly well this morning. They should appear gray with a slight blue/purple tint.
BTW, it's the D2 steel that I really like about the Queens. It takes a great edge and keeps it, and is very corrosion resistant. I think it's the best of both worlds between carbon and SS.
-
Not sure I want to look at this thread...way too many
worthy slippies :ahhh -
Nothing unusual over the weekend. I carried a Skeletool and Farmer in the Helo on Saturday, and on Sunday, an ST200 and the Farmer around the property. The only tool I used was the Farmer's blade, to cut open a few bags. I used dedicated tools for everything else...
So, I could have easily gotten away with my office slippie/flashlight carry.

-
Here's today's selection. I just realized that I've not been including my watch... :P.

Peak LED Solutions Pacific, aluminum/HA w/AA pocket body
Zed M.T.O Z.A1.07 w/Maratac MI6 NATO band
GEC Tidioute #66 Stockman w/paper micarta scales -
Pretty.......frigging sweet!
Those look very well together.that's us mobile
-
Thanks Nate. ;) I thought of these as I was putting a black shirt, belt and shoes on this morning.
-

Peak LED Solutions El Capitan brass, #4 power
Victorinox V-7 22x Chrono Racer
Queen Cutlery Teardrop Jack, D2 steel, amber cut stag bone -
So, this might be a dumb question... But why not a thin SAK instead of the traditional slippies? I mean, your username has to be nutSAK for a reason? :)
-
@bmot said:
So, this might be a dumb question... But why not a thin SAK instead of the traditional slippies? I mean, your username has to be nutSAK for a reason? :);)
The purpose here is to experiment with not carrying any multitools (SAK or otherwise) on my person, except for the Rambler on my keychain. It's giving me an opportunity to carry some nice traditional slippies that I rarely get to carry. I'm only carrying out the experiment at the office for a couple of weeks--at home and elsewhere I'm still carrying my usual SAKs and multis.
So far, I've not had to "bail out" yet, and have accomplished the tasks at hand with what I'm carrying. Those tasks have consisted mainly of food prep for lunch with the slipjoint (peeling oranges, slicing cheese, etc.) and turning phillips screws and cutting small zip ties with the Rambler.
The daily picture updates are only showing the part of my carry that is changing day-to-day. The first post of the thread shows the items I carry daily.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login