One more OHT question
-
Ok so I got my OHT back yesterday, I was excited to put it back to work today. First thing this morning I had to cut a piece of #14 wire so out come the OHT and boom it almost cuts it :(
I thought maybe im doing some thing wrong so I tried 3 more times and it never makes it through it, on the other hand my S2 sent pieces of the wire flying across the room as it blazed through the wire. I will continue to test it today but it looks like the OHT is gonna be a shelf queen maybe a winter tool (gloves) unless it surprises me.
That sux cause I really like it but I need it to at least cut small wire.
Sent from my SCH-I605 using Tapatalk
-
Hmmm, my oht has kick ass cutters. But I have not cut wire that small either. I tend to cut bigger stuff. Barbed wire, solid copper wire and things like that.
that's us mobile
-
This has me confused and a tad concerned... Is his an inherent flaw in the OHT, or could it happen with an ST300 or Rebar too? -
My rebar, wave, st300, surge, pst, kick, p4, and juice all cut small stranded and solid wire. The OHT did do a better jod with #12 solid but where the hard wire cutters dont meet it would not cut completely, but right above it cut solid fine.
My problem is im in the electrical field and you never know if you will run into solid or stranded.
Do not get me wrong the OHT is a great tool of exceptional quality.Sent from my SCH-I605 using Tapatalk
-
This has me confused and a tad concerned... Is his an inherent flaw in the OHT, or could it happen with an ST300 or Rebar too?I dont see this as an issue for the ST300 or Rebar. This issue IMO is the OHT'S slide mechanism.
The slide does not effect if it can cut or not. Its how tight the plier pivet is. Or if the cutters are meeting right.
that's us mobile
-
@mtngoat said:
My rebar, wave, st300, surge, pst, kick, p4, and juice all cut small stranded and solid wire. The OHT did do a better jod with #12 solid but where the hard wire cutters dont meet it would not cut completely, but right above it cut solid fine.My problem is im in the electrical field and you never know if you will run into solid or stranded.
Do not get me wrong the OHT is a great tool of exceptional quality.Sent from my SCH-I605 using Tapatalk
Did you try the #14 braided on the regular cutters or on the hard wire? Or both?
that's us mobile
-
This has me confused and a tad concerned... Is his an inherent flaw in the OHT, or could it happen with an ST300 or Rebar too?I dont see this as an issue for the ST300 or Rebar. This issue IMO is the OHT'S slide mechanism.
The slide does not effect if it can cut or not. Its how tight the plier pivet is. Or if the cutters are meeting right.
that's us mobile
Where is the smiley giving the middle finger???
thanx I couldnt think of what to call the pivot. -
This has me confused and a tad concerned... Is his an inherent flaw in the OHT, or could it happen with an ST300 or Rebar too?I dont see this as an issue for the ST300 or Rebar. This issue IMO is the OHT'S slide mechanism.
The slide does not effect if it can cut or not. Its how tight the plier pivet is. Or if the cutters are meeting right.
that's us mobile
Where is the smiley giving the middle finger???
thanx I couldnt think of what to call the pivot.Lmoa!
Will these help? t(-_-t) or .!..;D ,,!,
Lol!that's us mobile
-
My rebar, wave, st300, surge, pst, kick, p4, and juice all cut small stranded and solid wire. The OHT did do a better jod with #12 solid but where the hard wire cutters dont meet it would not cut completely, but right above it cut solid fine.
My problem is im in the electrical field and you never know if you will run into solid or stranded.
Do not get me wrong the OHT is a great tool of exceptional quality.Sent from my SCH-I605 using Tapatalk
Did you try the #14 braided on the regular cutters or on the hard wire? Or both?
that's us mobile
I tried it on both, then on both on my S2 and rebar. I think im gonna call leatherman and see what thet say, since im not useing it I dont mind sending it back again.
Sent from my SCH-I605 using Tapatalk
-
Talked to LM they are sending me a new set of cutters to try and see if that fixes the problem. We will see.
Sent from my SCH-I605 using Tapatalk
-
Least they are trying to fix it.
that's us mobile
-
I have always had great service from LM, probally why I keep buying them. Just ordered me a BO Rebar, gonna swap the jaws on my BO Wave fun project.
Sent from my SCH-I605 using Tapatalk
-
Keep us posted.
I can't believe you're having such trouble with the wire cutters.
my out was a monster at eatting wire.
I have a feeling your using the hard wire cutters and they don't close all the way so strands are seeking through.
-
JA I thought that at first also so I held the wire in place above the hard wire cutters and still no deal.
I will keep you posted.
Sent from my SCH-I605 using Tapatalk
-
Just tried again

The jaws twist at the end of the cut.Sent from my SCH-I605 using Tapatalk
-
It should have ate that wire like it was a snack.
that's us mobile
-
I had to use my rebar to cut a small piece to try the OHT
Sent from my SCH-I605 using Tapatalk
-
This bothers me
I got a nib oht I've been saving.
it better work as good as my last one.
-
Is normal for every MT which has wire cutter designed like these!!! the VIC or surge ecc.... you have to accept that if you want to cut flexible wire, ALL MT will perform in these way...... its not a problem of the plier, they are not designed for that. the pliers doesn't have too much play, cause it happened also to me with my VIC swisstool. Believe me, is normal with flexible cable, with nails it shouldn't happen.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
