Etherealicers Challenge Coin
-
It's going to be a very interesting contest!
-
First, this one is roughly to scale.
The idea is to have a slit in the coin where you glue in a small USB stick
Dimensions 20 x 12.3 x 3* mm (* could be as thin as 2mm, this is based on one I found on the website of a local dealer)
Probably get 4GB - 8GB, that is a very useful size without being too pricey. I reckon those should be available at about 6 - 10 USD.
-
Make one with my avatar as inspiration :D Everybody will love it :D
-
The Micro SD reader idea is great.
You can get a metal one for cheap and everyone can insert their own card the size they want. I carry one of those readers in my coin purse and it comes in handy quite a bit. 
Not sure about gluing it in though.
Some other attachment method would be better. The bonus of these is that they can be swapped out. -
@enki_ck said:
The Micro SD reader idea is great.
You can get a metal one for cheap and everyone can insert their own card the size they want. I carry one of those readers in my coin purse and it comes in handy quite a bit. 
Not sure about gluing it in though.
Some other attachment method would be better. The bonus of these is that they can be swapped out.Glue:
The idea behind this is simple. when you glue in a USB-drive the slot does not have to be that precise. If you want it as a cap / sleeve it needs to be rather precise, so everything stays in place.The original idea was actually a standard USB female to USB mirco-B male, this would allow to plug your USB stick into your mobile phone (and its timeless). However I'm a bit at loss how to implement it. Micro SD reader is another good idea. Both have the drawback that they are primarily geared towards non-Apple-Smartphones. I will play with the idea some more but I think there will be some sort of USB / computery thingy to my design.
I was thinking about a USB-stick like this: DX
-
@Etherealicer said:
I wish not every MT/SAK had a cap-lifter and a bottle-opener
31 Ways to Open a Beer Bottle Without a Bottle Opener
3 Ways to Open a Can Without a Can Opener
4 Ways to Open a Wine Bottle Without a CorkscrewWith that handy link to bottle-opening techniques, every SAK and MT with a blade or scredriver does have a "bottle opener," even if it doesn't have a Bottle Opener.
Thanks! The napkin and sheet-of-paper methods are also cool.
http://www.urlesque.com/2010/09/20/open-beer-bottle-without-bottle-opener/ -
I wish not every MT/SAK had a cap-lifter and a bottle-opener
31 Ways to Open a Beer Bottle Without a Bottle Opener
3 Ways to Open a Can Without a Can Opener
4 Ways to Open a Wine Bottle Without a CorkscrewWith that handy link to bottle-opening techniques, every SAK and MT with a blade or scredriver does have a "bottle opener," even if it doesn't have a Bottle Opener.
Thanks! The napkin and sheet-of-paper methods are also cool.
http://www.urlesque.com/2010/09/20/open-beer-bottle-without-bottle-opener/I have to say that those techniques don't work on all bottles. Some bottle caps are really tight so not even a regular bottle opener can get them.
-
these are about the most "minimalist" usb sticks around.

-
-
I like the USB stick coin idea, just got to hope that Verbatim sticks to the same dimensions for a while yet, so that the stick could still be replaced when 100GB versions cost $10.
I wouldn't worry too much about the minion tool having issues with copyright; looking at all the printable minion figures on 3D printing websites, along with the likelihood that the studio itself had a hand in making printable models available on Shapeways, during the second film's launch, i suspect they are a lot more open to the new kinds of guerrilla marketing, free publicity and brand awareness, than any copyright infringement the tool design might make.
-
@Tofty said:
I like the USB stick coin idea, just got to hope that Verbatim sticks to the same dimensions for a while yet, so that the stick could still be replaced when 100GB versions cost $10.I wouldn't worry too much about the minion tool having issues with copyright; looking at all the printable minion figures on 3D printing websites, along with the likelihood that the studio itself had a hand in making printable models available on Shapeways, during the second film's launch, i suspect they are a lot more open to the new kinds of guerrilla marketing, free publicity and brand awareness, than any copyright infringement the tool design might make.
Thanks for your input.
I'm not worried about the "stick-size". The primary dimensions are given by the USB-plug, so there will always be a brand that makes them to that shape. And since even in central Europe lots of companies still use Windows XP, I doubt that this plug will become replaced by the Mini/Micro/v3 version soon.
I liked the shape and looks of the minion. However, there are two problems with it:
- Its a smurfing cap-lifter :D
- I don't want people to say: "Cool, you have a Minion USB-drive", I want them to say "WTF is MTO?"
-
@Tofty said:
I wouldn't worry too much about the minion tool having issues with copyright; looking at all the printable minion figures on 3D printing websites, along with the likelihood that the studio itself had a hand in making printable models available on Shapeways, during the second film's launch, i suspect they are a lot more open to the new kinds of guerrilla marketing, free publicity and brand awareness, than any copyright infringement the tool design might make.Scratch everything i said above, about minions, i did some digging and it turns out i'm completely wrong.
Definitely go with the other design. -
Make some figure yourself. A ghost? A pig? An eye (bloated out like our eyes when they see a new shiny multitool)? A SAK (rounded like it would appear in comics)? Think of something without copyrights.
-
Packman?
-
So I'm pretty swarmed and therefore not much of an update.
@Verbatim Mem Stick- Up to 32GB
- Quick check on Amazon I saw the 8GB for below 10$, the 32GB I can get for less than 30USD here in Switzerland.
Design
First of I had an other idea with a instead to use a head use a plier-head :P, with a 4mm HEX-hole and a PH1 tip.
Going with the original idea. the Verbatime stick is longer than the one I originally have seen, so to maintain proportions I had to increase the coin-size.
Tools: Memory stick, 4mm and 1/4" Hex holes, pry-"bar"
Dimensions: Coin diameter 5cm, thickness at least 3mm (the Memory stick is 2mm).
Texture: All striped parts are rough, while the clear parts are smooth.
Personally, I think its overloaded.


-
I like both of those very much.

The plier head coin would be awesome.

-
It gets better and better. Make it blunt nose in order to preserve our pockets from piercing.
-
From a theoretical standpoint I like the technological direction this is taking. From a longevity standpoint I really don't trust tech. It wasn't that long ago that people thought a 128mb flash drive would hold all the files they could ever want to take with them.
I also remember getting a "great deal" on a 256mb SD card for only $140.

That's just me though- I like the concept of including tech into tools, but the reality is that I just don't trust it.
Def
-
@Grant Lamontagne said:
From a theoretical standpoint I like the technological direction this is taking. From a longevity standpoint I really don't trust tech. It wasn't that long ago that people thought a 128mb flash drive would hold all the files they could ever want to take with them.I also remember getting a "great deal" on a 256mb SD card for only $140.

That's just me though- I like the concept of including tech into tools, but the reality is that I just don't trust it.
Def
That's why I suggested the microSD/Transflash card reader. ;)
-
And I was agreeing with that. While it may have been a bit of a failure for CRKT, I am still proud to have provided that bit of insight for the Flux design. :D
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login