What's your latest SAK?
-
You must really like the black Explorer's! LOL Are these for parts?
The Explorer is one of my all time fav, if not thee fav!

@Syph007 said:
What a way to start the day.. having coffee by the front window with sun beaming in, and the mail lady brings me a package from Tim!
You know you're in deep when you start buying in 10 packs.

Thanks for the great service Tim, you're a huge asset to the SAK community!


-
For parts yep. Its the cheapest model to get the phillips driver from. I harvest the scissors and phillips layers, then the rest of the parts will get BO'd, and Im making black liners too, so then I can reassemble and have 10 all black spartans. Which is more exciting than 10 regular spartans.

@sir_mike said:
You must really like the black Explorer's! LOL Are these for parts?The Explorer is one of my all time fav, if not thee fav!

What a way to start the day.. having coffee by the front window with sun beaming in, and the mail lady brings me a package from Tim!

You know you're in deep when you start buying in 10 packs.

Thanks for the great service Tim, you're a huge asset to the SAK community!


-
Loving all this Orange! :ahhh
-
My Explorer turned up today

What I'm hoping to do is remove the magnifying glass and put the can opener and flathead on the same side like I see Syph doing on his awesome looking alox knives. I'm not sure what's involved so I'm gonna enjoy it for a couple weeks and do a lot of reading before it goes under the knife
just looking at it I imagine it might need a custom back-spring which isn't going to be possible for me.


-
@Syph007 said:
For parts yep. Its the cheapest model to get the phillips driver from. I harvest the scissors and phillips layers, then the rest of the parts will get BO'd, and Im making black liners too, so then I can reassemble and have 10 all black spartans. Which is more exciting than 10 regular spartans.
ahh, for a minute there I thought there were 10 alox explorers in the pipeline
-
For parts yep. Its the cheapest model to get the phillips driver from. I harvest the scissors and phillips layers, then the rest of the parts will get BO'd, and Im making black liners too, so then I can reassemble and have 10 all black spartans. Which is more exciting than 10 regular spartans.

ahh, for a minute there I thought there were 10 alox explorers in the pipeline
Someday yes! Id have to made metal mag glass holders though to stick to my rule of no plastic on alox mods.
Im not sure actually what to make the mag glass holder from. The easiest is aluminum or Ti, but then it looks like the bloody china knockoff ones as their holders were silver colored metal like material.Brass would work, but then it stands out from the rest of the tools... or maybe I just do aluminum and do a natural anodize on it, glosest to the old style gray mag.
-
Red brothers. Spartan and Pioneer.
More pics on <a href=http://swissknives.info/red-pioneer-and-spartan-set-2012/>my blog</a>


-
-
@RimfireNZ said:
My Explorer turned up today
What I'm hoping to do is remove the magnifying glass and put the can opener and flathead on the same side like I see Syph doing on his awesome looking alox knives. I'm not sure what's involved so I'm gonna enjoy it for a couple weeks and do a lot of reading before it goes under the knife
just looking at it I imagine it might need a custom back-spring which isn't going to be possible for me.


looking at the pictures alone, I do not know if this will work on a 91mm SAK. measure before you tear apart. maybe others will weigh in with advise, but I know Syph007 said somewhere recently that this only worked with the 93mm SAKs due to the springs being the same on both sides
-
@detron said:
looking at the pictures alone, I do not know if this will work on a 91mm SAK. measure before you tear apart. maybe others will weigh in with advise, but I know Syph007 said somewhere recently that this only worked with the 93mm SAKs due to the springs being the same on both sidesThanks for the info Detron, good to know. I'll do some more digging around before I go anywhere near the drill press.
If I have to keep it a 4 layer SAK then oh well. It'd just be nice if it was thinner.
-
looking at the pictures alone, I do not know if this will work on a 91mm SAK. measure before you tear apart. maybe others will weigh in with advise, but I know Syph007 said somewhere recently that this only worked with the 93mm SAKs due to the springs being the same on both sides
Thanks for the info Detron, good to know. I'll do some more digging around before I go anywhere near the drill press.
If I have to keep it a 4 layer SAK then oh well. It'd just be nice if it was thinner.
Yep unfortunately while it might be possible on the 91mm, its complicated for sure. On the 93mm the springs are symmetrical, so what I do is flip one around so that each tool ( the can opener and the bottle opener) still use the proper spring ends they were designed to work with.
-
-
-
-
@captain spaulding said:
Not new I got these a while back, but finally have the capability to post from my camera again so here are a few pictures I had on my camera.Bantam
Copper Cadet
Gunmetal Cadet
Limited Rancher
Excellent, 3 hard to find! Unless you sell a kidney!
-
looking at the pictures alone, I do not know if this will work on a 91mm SAK. measure before you tear apart. maybe others will weigh in with advise, but I know Syph007 said somewhere recently that this only worked with the 93mm SAKs due to the springs being the same on both sides
Thanks for the info Detron, good to know. I'll do some more digging around before I go anywhere near the drill press.
If I have to keep it a 4 layer SAK then oh well. It'd just be nice if it was thinner.
Yep unfortunately while it might be possible on the 91mm, its complicated for sure. On the 93mm the springs are symmetrical, so what I do is flip one around so that each tool ( the can opener and the bottle opener) still use the proper spring ends they were designed to work with.
Thanks for the update Syph. Guess it's gonna stay a vanilla Explorer then

-
@captain spaulding said:
Not new I got these a while back, but finally have the capability to post from my camera again so here are a few pictures I had on my camera.Bantam
Copper Cadet
Gunmetal Cadet
Limited Rancher
Great collection of Alox, Captain! I really like the black rancher and copper cadet

-
Thank you. I'm quite fond of them myself.

I was looking for a Copper Cadet and Gunmetal Cadet for a while and found them a couple months back. The Rancher was offered up for sale as well and I couldn't pass it up.
-
@captain spaulding said:
Thank you. I'm quite fond of them myself.
I was looking for a Copper Cadet and Gunmetal Cadet for a while and found them a couple months back. The Rancher was offered up for sale as well and I couldn't pass it up.
I'm curious about the 50/41 on the black rancher.
Does this mean it is number 50 out of 41 made?

Or does it mean something else? It's a really nice SAK in any case.

-
These just came in today from a member here!


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login









