Phillips Photo Spread
-
Great comparison that Bob 8) It's great to see how so many companies had roughly the same idea with just minor (and in some cases major) difference in application of that idea :)
-
Awesome work Bob!
Any speculation on why, if you look at the face of the driver when the tool is flat, the head of the driver makes an X if it's Swiss (and the early Gerbers) or a + if it's American?
-
@Spoonrobot said:
Awesome work Bob!Any speculation on why, if you look at the face of the driver when the tool is flat, the head of the driver makes an X if it's Swiss (and the early Gerbers) or a + if it's American?
That's a very interesting point that

-
@Spoonrobot said:
Awesome work Bob!Any speculation on why, if you look at the face of the driver when the tool is flat, the head of the driver makes an X if it's Swiss (and the early Gerbers) or a + if it's American?
I believe what you're seeing is an optical illusion. If you look at the very tip of the Swisstool's driver, the flat cut on the tip is a +, not an x. The driver appears as an X because of how the outer corners of the tool are "slanted" due to the tool being created from a shaft with a rectangular cross section.
I hope that makes sense...

-
Oh, I didn't explain myself very well.
If you place the tool flat on the table with the phillips drivers out the SwissTool/Old Gerber phillips head is rotated 45 degrees from than the other tools.
That is, when flat the SwissTool/Old Gerber has the cut facing upwards and the other tools have one of the tines facing upward. Here's an illustrative picture with a Paratool and a Spirit.

I'm curious if the rotation is just a product of production methods or if it has any meaningful purpose. I haven't noted any functional difference.
-
It does give you more material to play with and bigger tines as the diagonal distance is greater than the horizontal (or vertical) distance assuming the same basic starting block.

-
Trust Victorinox to come up with such a brilliant idea :)
-
Oh, so ideally you could have a smaller overall implement but have the same size tines due to the diagonal cross-section. Interesting!
-
@micky d said:
Trust Victorinox to come up with such a brilliant idea :)
Ahh but did Vic do it before Gerber? Aren't all SAK philips formed from round bar? (I don't have a SAK with a proper philips :( ) And Gerber had it on their old Multipliers

And yep thats right Spoon!
The phillips on the champ is the same style as the swisstool's :)
-
[SAK ignorant hat on] When was the Champ introduced ??? [/SAK ignorant hat off]
-
@micky d said:
[SAK ignorant hat on] When was the Champ introduced ??? [/SAK ignorant hat off]
Which version ???
The one with the same philips as the Swisstool :D
Sorry, it's not the same size, just same profile :)
As far as I know the champ came out in the late 70's early 80's, but I'm not sure

-
Fantastic post Bob
Very interesting .Dunc
-
Very good post Bob, the best IMO is defintely the Core. They grip superbly and the extended reach is very useful.
-
@Roadie said:
It does give you more material to play with and bigger tines as the diagonal distance is greater than the horizontal (or vertical) distance assuming the same basic starting block.
Sorry Spoon, I read too much into your post. I see what you mean now.
I think Roadie has made a good point. Victorinox evidently had packaging in mind when they decided to rotate the phillips head 45 degrees.
This is also quite evident in the #2 phillips in the cybertool. There's no other way they would have been able to get a #2 phillips from a 4mm bit.
-
Hi Nutsack,
You are spot-on. The diagonal gives you 1.414 times the length of the square.
Cheers- Joe
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Victorinox came before all