And so it begins.... (My adventures into Alox!)
-
@Syph007 said:
Finally a custom with orange! :DThis one also has one of the Ver 2.0 backsprings and Im very please to saw that they work excellent, and most importanly the tweaks I made to the inner profile made finishing them much easier.
Ive also got a new sanding / buffing machine white made finishing the back springs much faster. I think I should be able to pump out the standard mod configurations faster now.
Oh and this configuration I love. For me the ultimate urban carry. Metal saw instead of wood saw, scissors and phillips added to a farmer.








That is my perfect tool load out and that colour is
.
I want one bad now. PM incoming! -
It's the same color as my car so I need one too!
-
I've been straining my brain to get some progress on my website www.sakmodder.com
It's getting there. I figured out how to get the popup image things to work. Im now trying to organize all my customs by size and type and list everything on there for people to browse through.
Luckily irfanview has some great bulk image processing modes to add watermarks etc so I think I can get it to work without too much pain.
If I can figure out how, I really want to have some sort of SAK config wizard to help people figure out what is possible in a custom. I used to do web work for a living but that was over 8 yrs ago so alot has changed since then and Im pretty rusty.
I put a link to Gamble's kickstarter campaign there since he did a nice photoshoot with one of my Ti minichamps.

-
Im working on prepping another batch of scales for hard anodize.

I tried to show in this picture how the stock scales look compared to the final anodize.
If you've ever inspected the inner edge of an alox model they are quite rough. You can kind of see what I mean on the far left pic. After I strip them down the jagged edge is very apparent. I sand and buff them so they are nice and shiny smooth, and then when anodized no rough edges.


-
I like the look of the naked scales as well. I wonder how it would look if you polished the smurf out of a pair.
-
-
I had another request for a serrated 93 today. I got the serrations pretty even and Im happy with that. I used just a simple tool rest to hold the dremel at constant angle, and clamped the blade down. After the initial cuts I used a sharpening belt on my belt grinder and it turned out nice and sharp.
I tested on a bundle of 10 pieced of paracord and it cut though no problem in one swipe with clean cuts. I think I could cut much more if needed.
So here is a 93mm serrated voyageur. :D









-
@Syph007 said:
I had another request for a serrated 93 today. I got the serrations pretty even and Im happy with that. I used just a simple tool rest to hold the dremel at constant angle, and clamped the blade down. After the initial cuts I used a sharpening belt on my belt grinder and it turned out nice and sharp.I tested on a bundle of 10 pieced of paracord and it cut though no problem in one swipe with clean cuts. I think I could cut much more if needed.
So here is a 93mm serrated voyageur. :D
This one was for me :D . Thanks again for this !! It looks amazing! Cant wait for it to arrive.
-
I had another request for a serrated 93 today. I got the serrations pretty even and Im happy with that. I used just a simple tool rest to hold the dremel at constant angle, and clamped the blade down. After the initial cuts I used a sharpening belt on my belt grinder and it turned out nice and sharp.
I tested on a bundle of 10 pieced of paracord and it cut though no problem in one swipe with clean cuts. I think I could cut much more if needed.
So here is a 93mm serrated voyageur. :D
This one was for me :D . Thanks again for this !! It looks amazing! Cant wait for it to arrive.
Enjoy your custom
Syph does excellent work, and the serrations look great 
-
Nice job on the scalloping Robert

-
That serration looks great, well so does the rest of the knife like always, but good job on the serration! JR
-
any updates here on the cybertool 34 mod?
i'm owning this model of sak and looking at rebuilding it. my tool has gone a long way and deserves some fine restoration
-
@spyghost said:
any updates here on the cybertool 34 mod?i'm owning this model of sak and looking at rebuilding it. my tool has gone a long way and deserves some fine restoration
Doing a CT is for sure on the list, but thats a harder mod for sure. I can make alox scales that will work but that plastic bit holder would drive me nuts if I left it on an alox conversion. I think it would best to be remade in aluminum and clear hard anodized.
-
A brass bit holder with brass scales and liners. Set small bit drive magnets in the holes. Circuit board engraving on the scales. That would be an interesting CT
-
Here is something a bit different for today. A 4 layer bladeless mod. If I was to carry a bladeless SAK as a companion to a dedicated folder, this would be it. All the essentials are here.
It took me 5 tries to fit the tools on there though an have each tool be accessible and not block a nail nick. I've very happy with how it turned out though.








-
That's really cool Syph

-
Holy tank! Nice one Syph! JR
-
Syph007
Wondering why you used two springs under the Pliers? Why not just use the spring the pliers originally come with? -
@neillcurrie said:
Syph007
Wondering why you used two springs under the Pliers? Why not just use the spring the pliers originally come with?Those are for the 91mm saks. They dont work on 93mm alox.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login