Little Boy and Fat Man
-
Well I went home early yesterday from work because I didn't feel well so my favorite explosive team didn't see much use .
today
I'm finishing what I started yesterday morning. Cleaning, inspecting and protecting a couple of new homes at work getting them ready to show to the public.
not a whole lot for the fat man to do. He did tighten a lose towl rack but for the Smurf of it I'm using him to cut the plastic I lay over carpet floors to protect them.
I usually use a sharp utility knife with a hook blade.
fat mans plane edge blade is as sharp as I can make it . His blade melted through the 6 mil plastic like butter.

i was a little impressed with the nice straight smooth looking cuts it made. Its beyond razor sharp. No snagging or ripping through just a nice clean cut.

-
So you literally take everything with you when you move...
And in a big storm, the house will move by itself! ::)
I prefer my home made out of stone!

I wish my house was made from stone.
Speaking as someone that lives in a house made of stone, specifically Norfolk flint, you don't really want to live in a house made of stone. The WiFi doesn't go through walls well and mobile reception is rubbish.
-
So you literally take everything with you when you move...
And in a big storm, the house will move by itself! ::)
I prefer my home made out of stone!

I wish my house was made from stone.
Speaking as someone that lives in a house made of stone, specifically Norfolk flint, you don't really want to live in a house made of stone. The WiFi doesn't go through walls well and mobile reception is rubbish.
True, but it is good against zombies.
that's us mobile
-
what I'm wondering how would the new Surge stack against the Fat Man in your use. considering the tool loadout is quite similar but the overall design isn't
-
I'm afraid he's right. You need a Surge Joel...

-
@styx said:
what I'm wondering how would the new Surge stack against the Fat Man in your use. considering the tool loadout is quite similar but the overall design isn't@sawman said:
I'm afraid he's right. You need a Surge Joel...
the surge.
I haven't owned one but I need too
the new surge with the st300 plier head should stand up to my work.
I haven't used a wave style tool on the job yet
I've been hooked on the normal butterfly opening tool.
I have owned a few waves a charge tti and I still got a Bo charge alx I'm going to edc as my off work tool when I wrap this review up.
maybe I should do a similar review using a surge at work and the alx at home.
weekend update
the fat man had it easy last week. We got some homes ready for sale. The fat man opened packages,cut tape,plastic sheeting, straps, holding the new appliances closed,

little boy has been helping me work on some knives and tools I'm restoring. Not alot of work for him but he's trying to help. Opening packages and snacks :)
-
The fat man proved himself a excellent paint can opener at work today. A easy task.
there's lots of snow falling today
I'm sure we will be plowing tomorrow.
-
just don't lose anything
-
I was just abusing the fat man .
I used him to remove rusty coder pins holding a lock nut .
I had to give it my all and pry with the pliers to get them to come out.
I'm starting to be impressed with how strong the cc pliers are.
-
@JAfromMn said:
I was just abusing the fat man .I used him to remove rusty coder pins holding a lock nut .
I had to give it my all and pry with the pliers to get them to come out.
I'm starting to be impressed with how strong the cc pliers are.
This is one of the post why I love your threads! You have a working mans attitude I really like

One question: What are CC Pliers?

-
so the new style pliers are weaker than old (non-replaceable cutters) is a MYTH?!?!
-
I was just abusing the fat man .
I used him to remove rusty coder pins holding a lock nut .
I had to give it my all and pry with the pliers to get them to come out.
I'm starting to be impressed with how strong the cc pliers are.
This is one of the post why I love your threads! You have a working mans attitude I really like

One question: What are CC Pliers?

That means Cap Crimping pliers! That have that built/cut into the plier heads! :D
-
I was just abusing the fat man .
I used him to remove rusty coder pins holding a lock nut .
I had to give it my all and pry with the pliers to get them to come out.
I'm starting to be impressed with how strong the cc pliers are.
This is one of the post why I love your threads! You have a working mans attitude I really like

One question: What are CC Pliers?

CC= cap crimper
that's us mobile
-
I was just abusing the fat man .
I used him to remove rusty coder pins holding a lock nut .
I had to give it my all and pry with the pliers to get them to come out.
I'm starting to be impressed with how strong the cc pliers are.
This is one of the post why I love your threads! You have a working mans attitude I really like

One question: What are CC Pliers?

Same here. While I don't put my MTs through the degree of hard use/abuse that Joel does, I really enjoy reading about the abuse they can and do handle

-
Silly me.

Thanks for all the answers!
-
here's fat man soaking im some grease after help me change wheel bearings on a lawnmower trailer.

the black oxide seems to like thick grease. it really brings the black out and it sticks to it well
-
I noticed this with carbon blades. Seems the oxides really love some grease.
-
@Kampfer said:
I gave a Sidekick to my brother (a handy man) two weeks ago as a gift.
Today he came to me with a complain. He was up at high ceiling working on a ceiling fan, the Sidekick was able to pinch the wire but failed give it a clean cut.Since he doesn't care much about the OHO feature, I offered him my ST300. I told him if he can take the size & weight of ST300, it would be a much better workhorse for him than Sidekick and it will last a long time.
Let's see.
After 60 days, My bro hard uses the smurf out of ST300, it still looks like the day I passed it to him. He bucking loves it! (He would not give it back to me.)
Also he started sound like one of us: I wish it has scissors.444th post!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login