What's your latest Leatherman?
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors.

That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors.

That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
I was gonna buy a Skinth but they all say they don't fit the needle nose MP600 (only the blunt nose). I guess I'll have to carry it in the sheath it comes with which is a very nice sheath but no room for LM adapter and bit card ::)
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors.

That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
I was gonna buy a Skinth but they all say they don't fit the needle nose MP600 (only the blunt nose). I guess I'll have to carry it in the sheath it comes with which is a very nice sheath but no room for LM adapter and bit card ::)
lol
I heard the same thing.
that was one of the reasons I bought a blunt nose.
thoughts
the es4 stripper goes from 20 to 12 gauge . I wish it went down to 10. It should work fine for me though. Most of the wiring I mess with is automotive and normally fairly thin so I should be ok.
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors.

That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
I was gonna buy a Skinth but they all say they don't fit the needle nose MP600 (only the blunt nose). I guess I'll have to carry it in the sheath it comes with which is a very nice sheath but no room for LM adapter and bit card ::)
Actually, the MUT Shield fits the NN MP600's ;)
According to my rough measurement just now, the MP600 is 5.1 inches long, so it might or might not fit the Skinth Plus, I think it will fit the XL though. At least, that would make sense :P
-
Thanks for that info, I will keep that in mind.

-
[quote author=JAfromMn link=topic=33794.msg876671#msg876671 date=1397496728]
I got a squirt es4 in the mail today from leatherman warranty/repair dept.I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors.

That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
I was gonna buy a Skinth but they all say they don't fit the needle nose MP600 (only the blunt nose). I guess I'll have to carry it in the sheath it comes with which is a very nice sheath but no room for LM adapter and bit card ::)
lol
I heard the same thing.
that was one of the reasons I bought a blunt nose.
thoughts
the es4 stripper goes from 20 to 12 gauge . I wish it went down to 10. It should work fine for me though. Most of the wiring I mess with is automotive and normally fairly thin so I should be ok.
[/quote]well I did a little testing and the es4 strips wire,great.
I tested it on some telephone wire and the wire I use for water meter remote readers and it worked awesome.
my st300 has a hard time stripping the little stuff. The es4 will be part if my work edc from now on.
I am very happy with leatherman warranty dept.
I am going to write them a thank you email. I'm very impressed.
-
Someone just won a "near unicorn" on eBay: a green LM Juice !!!!!!

Was it anyone on MTO ? If so, own up so we can congratulate you for getting a rare piece of LM history

I've wanted one for ages, and my search continues.........
-
@gregozedobe said:
Someone just won a "near unicorn" on eBay: a green LM Juice !!!!!!
Was it anyone on MTO ? If so, own up so we can congratulate you for getting a rare piece of LM history

I've wanted one for ages, and my search continues.........
I'm almost afraid to ask... but how much did it go for?
-
I will soon be the (hopefully) proud owner of a Raptor! :ahhh
I'm very excited about this tool. I liked it so much I broke one of my main rules and actually paid the over-priced cost of $74.95. But the good news is that includes 2-day Prime shipping :)
-
@sawman said:
I will soon be the (hopefully) proud owner of a Raptor! :ahhhI'm very excited about this tool. I liked it so much I broke one of my main rules and actually paid the over-priced cost of $74.95. But the good news is that includes 2-day Prime shipping :)
Let us know what you think once you get it.

-
[quote author=sawman link=topic=33794.msg876677#msg876677 date=1397497337]
[quote author=JAfromMn link=topic=33794.msg876671#msg876671 date=1397496728]
I got a squirt es4 in the mail today from leatherman warranty/repair dept.I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors.

That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
I was gonna buy a Skinth but they all say they don't fit the needle nose MP600 (only the blunt nose). I guess I'll have to carry it in the sheath it comes with which is a very nice sheath but no room for LM adapter and bit card ::)
lol
I heard the same thing.
that was one of the reasons I bought a blunt nose.
thoughts
the es4 stripper goes from 20 to 12 gauge . I wish it went down to 10. It should work fine for me though. Most of the wiring I mess with is automotive and normally fairly thin so I should be ok.
[/quote]well I did a little testing and the es4 strips wire,great.
I tested it on some telephone wire and the wire I use for water meter remote readers and it worked awesome.
my st300 has a hard time stripping the little stuff. The es4 will be part if my work edc from now on.
I am very happy with leatherman warranty dept.
I am going to write them a thank you email. I'm very impressed.
[/quote]Glad they did right by you as they did me with my TTi

-
@sawman said:
I will soon be the (hopefully) proud owner of a Raptor! :ahhhI'm very excited about this tool. I liked it so much I broke one of my main rules and actually paid the over-priced cost of $74.95. But the good news is that includes 2-day Prime shipping :)
I'm looking forward to your thoughts on it.
I want one and I really have no reason why.
it just looks cool.
I bet it works as good as it looks.
-
Oh yeah, and my latest Leatherman is actually a set of three: PST, original Supertool and original Wave :D All are like new, with the Supertool and Wave being listed as never carried. Can't believe I happened to find them on eBay. Both on the same day, and both for great prices, especially when I was about to pay around the same price for a Swisstool. I'm so glad I decided to browse around a bit before getting the Swisstool. I still can't believe I got those two originals in such good condition for such a price :ahhh
And not to leave the little PST out of the love :D It was a gift from one of the many generous members here, and I can't thank that member enough
This is the version I've been after. A late 90's version with the "pivot out" drivers and the smaller plier pivot. So enough of my gushing over these beauties...here are some pics 
-
Nice tools Kyle.

-
Figured I'd do separate posts for each one considering how long the last one was. Here is the Supertool (date code 0897 and 0997).



Comparison shot with PST blade:

I must say, I am surprised just how beastly and solid it is, yet it only weighed in at 8.8oz, which is the same as the new scaled TTi. The thing that saves the TTi though, is that with a pocket clip, it's not nearly as noticeable as the Supertool will be in my back pocket.
However, I am really impressed with it, even though it's more tool than I'd likely need, and it looks huge in my small(ish) hands. I love the solid snap of each tool when it locks into place, however, the unlocking method isn't that great since it requires one to open another tool to a 90o to release the locked tool. It's nothing major really, but potentially risky if a blade is deployed...just have to be careful. Speaking of the blades: both of them are razor sharp. One major plus to the locking mechanism is that it doesn't interfere with the aesthetics like all the other locks on other models do. I really like that it resembles a much beefier PST.
Overall, I really do like the Supertool, and wouldn't mind carrying it, provided I can deal with the feeling of it in my back pocket next to my wallet. However, after the newness wears off, I will likely put it in one of our vehicles as it seems like a good MT for that duty. I'll see how it does with some regular carry first though.
-
And here is the original Wave (date code is 0802), which is one I've wanted for a good while now:
Ok, I love this one too :D There are only two real negatives to it: There is some play in the handles when it's closed, and the fact that it won't work with a pocket clip. Neither are major issues, but I've gotten accustomed to carrying the TTi with the pocket clip, so it's too bad. I knew this would be the case (same with the Supertool locks). The Wave's size and weight should help to make this less of an issue.
I get a kick out of the fact that there are four flathead drivers, but I don't mind. The blades are razor sharp just like the Supertool's. Pliers operate smoothly, and the non-locking tools snap into place solidly enough. The diamond file looks more...well...diamondy if that makes any sense, than any other diamond file on any MTs I've owned.
-
Someone just won a "near unicorn" on eBay: a green LM Juice !!!!!!

Was it anyone on MTO ? If so, own up so we can congratulate you for getting a rare piece of LM history

I've wanted one for ages, and my search continues.........
I'm almost afraid to ask... but how much did it go for?
shhhh ..... $US 152.65
-
Someone just won a "near unicorn" on eBay: a green LM Juice !!!!!!

Was it anyone on MTO ? If so, own up so we can congratulate you for getting a rare piece of LM history

I've wanted one for ages, and my search continues.........
I'm almost afraid to ask... but how much did it go for?
shhhh ..... $US 152.65
A rare bird indeed. And I thought it would go higher once one went for sale.
Do you have a link?
-
@sawman said:
I will soon be the (hopefully) proud owner of a Raptor! :ahhhI'm very excited about this tool. I liked it so much I broke one of my main rules and actually paid the over-priced cost of $74.95. But the good news is that includes 2-day Prime shipping :)
Lmao! You broke your "fools and there money rule"!!!
All joking aside, not to bad of a price. Let us know how it works.live from Nate's mobile
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login











