And so it begins.... (My adventures into Alox!)
-
You can get away with using it functionally, but its too short so it will look pretty odd. Theres a thread on here somewhere with pics of what it looks like. Big space at the end.
-
Here'e the thread that explains exactly.
</topic/29175
Pic from that thread. See the big gap a the end.

-
Everything's now clearer!!
Many thanks -
Since getting my first Cadet a few weeks ago I've come to really like the clean lines of the Alox knives. Now I've got a couple of Pioneers on the way too I've just read this thread from the beginning (re-read, actually) and can't wait to get stuck in to some Alox mods. Really appreciate the work you've put in documenting your work over the last couple of years.

-
@hiraethus said:
Since getting my first Cadet a few weeks ago I've come to really like the clean lines of the Alox knives. Now I've got a couple of Pioneers on the way too I've just read this thread from the beginning (re-read, actually) and can't wait to get stuck in to some Alox mods. Really appreciate the work you've put in documenting your work over the last couple of years.
Thanks! Ya its been a fun couple of years and I haven't gotten tired of it yet. There are still plenty of cool things to try. I love alox knives! I did decide to focus though on the 93mm pioneer frame. I can fit just about any tool on there, the springs are nice and symmetrical too. I finished up all 84mm size mods now and I wont be doing any more of those anytime soon. If I ever get back into that size I will be making up custom backsprings for scissors additions. I strongly prefer the pioneer to the cadet though for overall feel and function.
I was just looking over how many donor knives Ive bought since I started and its a bit nutty. Over 300 pioneer/farmer SAKs and about 400 msc cellidor. Mostly compacts/swisschamps/explorers to get the good parts. Oh how I wish I had a friend at the Vic headquarters! :D
-
Hey man ... had to register so I could post on your thread. Man you do some absolutely gorgeous work!
I'm extremely interested in modding a few SAKs of my own and there is a TON of useful information here. I'm only on page 23 and can't wait to have time to finish the rest of it.
From what I'm seeing, it would be cheaper in the long run for me to source some brass liners instead of using the stock ones so that I can make tools of different widths without having to spend a ton to rob liners out of other knives.
For your scissor backsprings, what steel are you using? Did I read correctly that you use 440? Is that A, B, or C? I think I found a company that will waterjet them for me, I just need to come up with a template for them. I'm still looking for an anodizer so I can put some color in my work!
From what I can tell, the best way to put scissors in a 93mm is to get a Solo and do some modding to the blade's backspring? I haven't seen exactly what needs to be done to it yet. Can anyone provide a little help on that? I would love to be able to put my Farmer back in my pocket with scissors instead of a saw. It's in a million pieces right now waiting to be put back together. :) I have a very limited amount of pivots so I want it to be perfect before I start cutting on them!
I have almost everything I need from knifekits. I forgot to add washers to my cart, but after going back and looking it doesn't look like they have any 1/8th ones anyway. I've already taken apart 4 Pioneers and drilled 1/8" pivot holes in them along with a Farmer, and an Explorer (only to find out the Explorer with the gray mag has the longer inline Phillips!!). From what I'm reading you guys extend the pivot barrels into the actual scales. I need to look into doing that. Right now all I've done to my practice SAK is to countersink the middle hole so the torx screw sits flush.
The final part is just acquiring the Alox knives. I can get Farmers on Amazon for $30. Is there a local MT guy that sells them cheaper? I would love to support a local guy if I can.
I love getting my hands dirty and for whatever reason working with these SAKs is very soothing.
Thanks for all the crazy information you're laying on us Syph!!
Hey there. :D Well you did have to register on THE best forum for SAK enthusiasts if you are that interested in SAKs and modding this is the place to be!
If you need a few extra stock alox liners to avoid cannibalizing new alox for liners I can help you out there. I have quite a few spares and I probably only use stock liners for half my builds.
I dont think knifekits carries 1/8" washers, but usaknifemaker does. Ive also bought msc things from texasknife and knifemaking.com (jantz)
I make my own washers now from shim stock since I need smaller OD ones then any place sells anyhow. :D
Thanks and sorry for the really late reply ... life with 3 very active kids gets very chaotic at times.
So after I posted this I was able to add scissors to my Farmer by using a backspring from an 91mm with the hook. Yes, there's the cavity in it but, personally, I don't think it looks any worse than the shorter 91mm without the hook, and there's 100% less work involved. It's certainly not pretty but it's my personal one and it's a user and I actually like the Frankenstein look to it.
I think I'm going to be limited on making my own liners and modding backsprings until I get a belt sander, which won't be any time soon so I'm going to stick to bare minimal mods using the stock liners.
I was able to score an Explorer with the shorter Phillips but I haven't been able to take the time to see what all it's going to take to get it added. I think I want to replace the can opener with it so I need to get them all measured to see what washers I need, if any.
I love looking at your pictures, man! You do some beautiful, beautiful work.
-
I dont think Ive done this specific configuration before. A cross between a lumberjack and a scientist.

I love oranage!






-
I'm not a fan of the combo tool, but I wouldn't kick it out of my pocket. ;)
-
@captain spaulding said:
I'm not a fan of the combo tool, but I wouldn't kick it out of my pocket. ;)LOL I feel the same way actually. I prefer the standard openers since they are thicker, but sometimes the combo tool has its place.
-
I like the separate openers for the added prying/screwdriving capabilities. Plus I like having the awl.
-
I'd love that combination without the magnifier. Never had the need for it. Wish Vic would do a combination wrench or find some other tool. Could you have the combo opener blade side and the awl in place of the mag.
-
@nj2656 said:
I'd love that combination without the magnifier. Never had the need for it. Wish Vic would do a combination wrench or find some other tool. Could you have the combo opener blade side and the awl in place of the mag.I know he does them with the separate can opener and bottle opener both across from the phillips. That's how I'd go.
-
That's one of the four mods I've had Robert do. Just got two back and looking at another. Isn't the first step admitting you have a problem.
-
Robert, I saw a picture on line of a marlin spike mod. Not sure if it was one of yours or not. Marlin spike, main blade, saw, combo tool and awl. Combo and awl looked like same layer. Awl was opened to the same side as the blade. Have you done one like that? I'd like to have some thing like that but don't really care for the spike. Thought maybe scissors or a metal saw/file instead.
-
@nj2656 said:
Robert, I saw a picture on line of a marlin spike mod. Not sure if it was one of yours or not. Marlin spike, main blade, saw, combo tool and awl. Combo and awl looked like same layer. Awl was opened to the same side as the blade. Have you done one like that? I'd like to have some thing like that but don't really care for the spike. Thought maybe scissors or a metal saw/file instead.I did put the awl and the cap lifter in a layer once. I had to bend the caplifter to get it to fit though so I dont think it was the best way to do it. The awl is longer than it looks, longer than the can opener which is the problem.
-
Way back near the beginning of this thread he added scissors and a pocket clip to a black Pioneer. Then I had him remove the opener layer from a +B fire steel Farmer and add red anodized scales. Just sent the Pioneer back for a new mod. The clip didn't work out. So I had an opener layer mod done with orange scales and black liners. The donor knife for the Phillips was a Yeoman that I had him add a saw to for a Huntsman slim+. Got a few more in mind.
@Random Dan said:
That's one of the four mods I've had Robert do. Just got two back and looking at another. Isn't the first step admitting you have a problem.
Four? :o
-
Take a wild guess what is the least loved and least requested SAK component for mods.....
.
.
.
.
So I have to wonder ... has anyone ever scaled a fish with the fishscaler?
-
I'd love an orange mod with 17 fish scalers :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login