Swisstool X and Spirit comparison pics.
-
Oh. My. God.
I just realized something: the Spirit doesn't have a "normal" blade. It's just the "butter knife".
Does that mean I could legally EDC it in Israel (or UK, if that's closer to your heart) ?

P.S. Amazing photos, Benner. I don't know what camera everyone here uses, but it's ten times better than anything I've ever dealt with.
-
In addition to all of the above, the X comes with a crate opener. This tool is not offered on the Spirit;
Isn't the bottle opener/combi tool bulked up so it can be used for prying?
-
@Leatherman123 said:
Isn't the bottle opener/combi tool bulked up so it can be used for prying?Yup, according to the packaging from my Spirit anyway :) (Number 7 on the list)

-
In addition to all of the above, the X comes with a crate opener. This tool is not offered on the Spirit;
Isn't the bottle opener/combi tool bulked up so it can be used for prying?
What I was saying, was that there is no dedicated crate opener like there is on the X.
-
But isn't it just a large flat head screwdriver that can be used for prying?
-
@Leatherman123 said:
But isn't it just a large flat head screwdriver that can be used for prying?Yes it is, but there is not one of those dedicated type tools on the Spirit.
-
I see what you mean.. Ben, what have you been using that file for!
-
What a fantastic post! Thanks for all the work!

I have been dying to see a point-by-point comparison like that. Really informative.
I have a few questions:
-
Do the files have the same surface on both sides?
-
I think both files are combo metal saws, correct? If so, does the Spirit's more aggressive teeth make it a better metal saw?
-
The Philips on the ST-X is at quite an angle which I think would prevent it from reaching many recessed screws. The Spirit's shank has much less of an angle, but it still has one. Can the Spirit reach recessed screws, like those found in electronics, or does the shank's angle prevent that?
-
-
Great comparison shot's and text Ben, should help a lot of people out who are considering getting one tool or the other

max6166 The files have a slightly different surface on both sides, and yes they can be used as metal saws too :)
The spirit file will cut through material faster, but the swisstool will leave a better, smoother finish, so it's up to you what's more important :)
As for the screwdriver reach, I've never had any problems with either design, a lot of my son's toys have deeply recessed screw's, and none of the other MT's I've owned would be able to reach them, so I'd go for it and get one, or better yet both :D
-
@Leatherman123 said:
I see what you mean.. Ben, what have you been using that file for!I suppose a clearer way to put it, is that the X has 11 impliments that fold out from the handles and the Spirit has 10, the additional one on the X being the dedicated crate opener.
The file? Well I use it on a lot of things. It is one of the tools I use the most.
-
@max6166 said:
What a fantastic post! Thanks for all the work!
I have been dying to see a point-by-point comparison like that. Really informative.
I have a few questions:
-
Do the files have the same surface on both sides?
-
I think both files are combo metal saws, correct? If so, does the Spirit's more aggressive teeth make it a better metal saw?
-
The Philips on the ST-X is at quite an angle which I think would prevent it from reaching many recessed screws. The Spirit's shank has much less of an angle, but it still has one. Can the Spirit reach recessed screws, like those found in electronics, or does the shank's angle prevent that?
No problem. ;) I'm surprised there wasn't one on here already.
Here are my take on your questions;
-
The files do have a slight variation on each side, but it is only a very slight difference - no where near as obvious as the differences on a Leatherman file. The one on the Spirit is more aggressive than the one on the Swisstool X which I feel is an improvement as I never really found an application for the one on the X.
-
The metal saw has the same teeth on both, but the Spirits is slightly thicker. TBH I am yet to use either as a metal saw, so I can't really comment on their effectiveness.
-
I personally have not had any problems with the phillips reaching anything, but I do see the shape of the Spirits to be an improvement.
-
-
I've only used the metal saw on the Swisstool X but it made short work of a metal pipe when i put a blind up. The only negetive is now the teeth are noticibly deformed and i'm unsure how effective they will be next time.
The philips on the spirit is slightly better, as when you half open up the body so it is extra long the entire thing is very thin and there is very little angle, whereas the st-x is still quite chunky and the philips head is angled towards one side.
I was going to put up a photo of the spirit-s and st-x blades next to each other but my phone has decided it's no longer speaking to my computer....
-
Very interesting to note that not one single blade or driver is commonly shared between the two models.
Does the Spirit S have the same plain edge blade as the Swisstool?

I would image the one on the Spirit would be shorter.
Here you go, sorry about the quality of photo but my phone isn't the best quality camera in the world!
<a href="http://img405.imageshack.us/my.php?image=stjc1.jpg" target="_blank" rel="noopener noreferrer"><img src="http://img405.imageshack.us/img405/5589/stjc1.th.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Very interesting to note that not one single blade or driver is commonly shared between the two models.
Does the Spirit S have the same plain edge blade as the Swisstool?

I would image the one on the Spirit would be shorter.
Here you go, sorry about the quality of photo but my phone isn't the best quality camera in the world!
<a href="http://img405.imageshack.us/my.php?image=stjc1.jpg" target="_blank" rel="noopener noreferrer"><img src="http://img405.imageshack.us/img405/5589/stjc1.th.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I didn't realise they were shaped differently as well.
Thanks for the pic!

-
In addition to all of the above, the X comes with a crate opener. This tool is not offered on the Spirit;
Isn't the bottle opener/combi tool bulked up so it can be used for prying?
What I was saying, was that there is no dedicated crate opener like there is on the X.
The large screwdriver doubles as the "crate opener" on the Spirit. That is why it is much thicker than that of the X. It is not a dedicated tool, as you mention.
-
Yeah, that's what I was saying- Terry!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login