kkokkolis' EDC & SDC
-
Now let's see what did I fit inside for the moment. It weights ~ 1.5kgr already, mind you. I'm open to suggestions for refinement.

All items fit nicely, removing and putting back anything is extremely easy and nothing rattles.
-
What's inside? Let's have a look.

- Left side tube:
- Victorinox Spirit
- Victorinox metal clip
- Left inner pocket:
- Bit holder with 11 hex bits and magnetic bit adapter, modified to fit all Victorinox Philips drivers and Juice Philips driver.
- Left inner tube
- Victorinox ratchet (magnet mod)
- Leatherman adapter
- Hex powered tools adapter
- Back pocket
- Diamond sharpening rod (holder removed)
- Victorinox dual sharpener (cap removed)
- Small leather coins purse with
a. a sewing kit with needles, curved leather needle, pins, safety pins, buttons, thread of different colors
b. cable wires
c. tough wire
d. Victorinox sharpening stone
e. Victorinox toothpick
f. Victorinox nylon string
g. two surgical blades
h. four band aids
i. two alcohol bands
j. some rubber bands
k. AAA battery
l. Victorinox mechanical pencil
m. IKEA pencil
n. IKEA paper measure tape
o. three Cybertool double bits and rubber band
p. three large needles
q. There's space for more. I think that a couple of paper clips and an office razor would be nice.
- Right tube
- Leatherman Charge TTi
- Right inner pocket
- Recta/ Victorinox Compass/spirit level/ thermometer/ ruler/ magnifying glass (forgot to take it out for the pic)
- Right inner tube
- MiniMag Lite Solitaire LED flashlight (with S-binner and lanyard)
- Main pocket
- Big BiC lighter in Georgia fancy container
- Victorinox Swisschamp XLT with magnet modified Cybertool and magnetized fishhook remover
- Opinel Couteaux de Jardin #8 (workhorse)
- Victorinox red neck lanyard (helps the lighter and XLT to stand taller and can be used when working)
- Front pocket
- XLT's elastic lanyard with two S-binners
- Skinth business card
- Front dual pockets
- two Leatherman bit kits.
-
One problem with the way I carry the CatchAll is that it is difficult to open the central flap (and to a lesser extend the side tube flaps) inside the bags. In order to have instant access to something it must be attached to the MOLLE straps. Since the most used item is the Opinel and it has no pocket clip, I use this configuration. I fix the side tube flaps (usually just the right one) under the central flap when it's closed and move the Charge to the MOLLE strap and Opinel to the right side tube. Voilà.

-
More options...
There are items that I don't EDC but occasionally might need. For example:
- My Endura or other knife with pocket clip (I have two or three) can be carried on the MOLLE straps (pic)
- Both side tubes fit 4.5" Multitools. I tested the Swisstool and Surge and they fit. In fact I can fit 4 Multitools (!!!) because the Spirit fits in the main compartment and the Charge in the MOLLE strap (with the Endura on the other one) and the only sacrifice is the BiC (but a small BiC fits also). Insane. Armed like a lobster we say in my country.
- Instead of the XLT I might choose the Swisschamp, Pocket Toolchest or Juice Pro and free some space. Or fit two or three smaller SAKs, like my Harvester, Mountaineer, Spartan, Ritsartz Picnik etc. Or I could remove the BiC and put the Swisschamp XAVT!
- Instead of the Opinel I might put something else (like another Opinel obviously, such as my Outdoor or an Electrician)
- The front pocket is in fact empty. I can put in there my Executive or my Cadet or my Squirt S4 (no need to of course with all those tools I already have). But a Pocketwrench II or Piranha is what I am thinking of (I don't have either and I am ready to buy one, make me an offer). When I carry my Surge I can fit there my jigsaw blades holder of course.
- I can put some more minor items in the purse. I already mentioned an office razor and paper clips but even some modeling blades can fit with their holder in one of the tubes. I might put some zip ties if I find where I put them. Hell! I might even put the Victorinox oil in there!
- I didn't put pens and markers because I have them in every pen holder my bags have. But I tried them and they fit in several places.
- Still, there's room for more. I think that Metro was very precise when he named that Skinth a CatchAll!

-
Hmmm... Looks good, and HEAVY

Might want to add an adjustable spanner, though? Seems you have/could make room for a small one ;)
-
A Crunch wouldn't do?
-
Well, more than a regular MT, but not nearly as good as a real spanner ;)
I think you need both

-
Since my Bahco knife can't fit it the Skinth, a small Bahco adjustable wrench would do.
-
@kkokkolis said:
Since my Bahco knife can't fit it the Skinth, a small Bahco adjustable wrench would do.Exactly

-
I just love looking at what others carry. Thank you for sharing yours and that catch all looks to be some piece of gear. I'll take a closer look and see if I can add anything to your already capable carry system.
-
Watches? I always carry one and have just a few. I have an eye for two specific watches I might get someday. Just one of the two. My No 1 is Tissot T- Touch

And my No 2 is Suunto Core

Until then I EDC the last year a Sector that's very EDC friendly.

For outdoors (and right now) I use a Casio Protek

And I exchange them from time to time with my previous EDCs, an automatic mechanical watch called Follie Follie


A Swiss Military (very nice)

A watch my mother gave me

And a Reymond Weill, present of my wife 23 years ago

Rarely I carried this Soviet chain watch, mechanical and stainless steel with hunting engraving. Might EDC it when I grow older.

-
This is an accessory I bought recently, intended for electronics, adaptors and cables protection. It is big for its storage capacity but it provides a soft shield that might prove valuable if you know how our luggage are treated in airports. So I use it for travels and I have it with me right now (Easter vacations) and put my portable HDD in it.


Nice logo, huh? -
I had an opportunity to test my tools' metal saws capability. This was a diamond file sharpening steel rod of 5mm diameter that stood tall in the Skinth at 14cm. I didn't like the slight protrusion of the flap as a result of it's height. So, just after the previous post I started cutting it with my files. I had no anvil with me, so I did it freehand on my knee. I used the Charge's TTi and Swisstool's Spirit file one after the other and finished with my Swisschamp's file because it is slimmer and I could fit it in the cut. I changed files every now and then to avoid overheat. It was easy at first but then the core of the rod was much harder. It was harder than expected but I guess that's reasonable because it is a file itself so it was hardened some way. The files show no wear visually after the task that took a whole hour. It is nice to know what my tools can do. I already used the files of my Swisschamp (the older type mostly) and my Surge (I didn't have it with me, otherwise I would have used the jigsaw metal files I have) but that was the toughest material I cut freehand so far. I guess I am capable of escaping a prison if they leave me to keep my Skinth with me!
Now the rod stands perfectly in the Skinth and I feel better.
-
Cool collection of watches you have.

-
Can't hide my joy and satisfaction!

-
Some refinements. The Skinth weights now 1.6kgr.

The left side tube is a nice place to fit the Victorinox metal clip. I occasionally use it for several purposes and in many occasions I regretted leaving it behind. Now it is always with me and I also like it.

The ring helps to open more easily and quickly the flap and also to hang the Skinth from somewhere, as already described and sawn on the outdoor picture in a previous post. A little black rubber band is there handy for several uses, making an improvised vice grip out of the Charge among them.

First I used a telescopic Rötring pen but this short CERN pen takes a regular Parker insert ang has the correct colors, red, black and silver (chrome). Situated in the Charge's side tube, easily moved in and out with the flap closed.

Added some pieces here and there, such as paper clips, a notepad, another easily accessible pencil, a plastic card holder with a business card (in case I'm unlucky enough to lose it and lucky enough somebody would send it back to me) and some more items in the leather wallet (cotton sticks, more surgical blades and alcohol pads etc). Also a couple of bookmarks that can be used as money clips also.
I think that it's full now. But a Pocketwrench or Piranha fit easily.
I still like to play with that Skinth. -
Very well thought out and capable carry . I can see now that I need to standardize on fewer bags ( I currently use 5 - need to get it down to three . ATM , much of my EDC lives in cargo pockets , and belt pouches .
Chris
-
@kkokkolis said:
Some refinements. The Skinth weights now 1.6kgr. ...First I used a telescopic Rötring pen but this short CERN pen ....
Excuse me, I have a german OCD moment....

Ah, better. It's Rotring (Red Ring), and I always get hung up on wrong umlauts, even if I don'T want to...One question: 1,6kg, really? As EDC? I would try to cut this. One point: Why are you wearing two nearly identical Multitools (was it Surge & Spirit?)? Why not carry just one? Is there a logic besides 'I like them both' behind it?
(I don't know if I succeeded, but I don't want to bash you, I am seriously interested in an answer. And sorry for the umlaut moment) -
Thank you. Standardization and organization is godsend.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
