Charge Owners club !
-
@greenbear said:
I'm now just wishing I'd bought a TTI (or preferably TI) rather than an AL...hey ho... ::)The Charge AL is one on my wishlist although I'm in no hurry to buy it. I used to have an ALX and was sorry I sold it. I liked the aluminum handles very much.
-
The more I get thinking about it, the more I begin to think that I prefer the AL slightly to the TTi. If my TTi had the regular serrated blade and non-cap crimper pliers, I'd be all set.
-
I'm now just wishing I'd bought a TTI (or preferably TI) rather than an AL...hey ho... ::)
The Charge AL is one on my wishlist although I'm in no hurry to buy it. I used to have an ALX and was sorry I sold it. I liked the aluminum handles very much.
I bought it over the TTI as I really do not like the hooked blade, but it's never been used and sits NIB in a drawer. I use a Swiss Tool in preference, a shame really as the Charge has a good reputation as a tool :)
-
I have a couple of the older LM Charge TTi models and sometimes find it a bit more tool than is necessary. On those occasions an Alox SAK sometime gets the nod. But the standard 93mm Alox SAK doesn't come with some of the features that are box stock on the Charge TTi. Namely, scissors, locking blade, higher wear resistant blade steel (CPM S-30V), diamond abrasive file and removable pocket clip. So that got me thinking, maybe a Charge TTi with less could be more for occasions when my needs don't require a fully blown TTi.
So this is what I ended up doing some months ago. It's pretty light, has become a goto tool and does the business with great compactness and competence.



-
Absolutely a great idea
But what happend with the other handle of the Charge?? -
Nice.
The regular bit holder could be there instead of the small one and the prying driver. And there's room on the other side for a couple of tools too, although it would be difficult to implement them without backspring or lockin mechanism. -
@Teletin said:
Absolutely a great idea
But what happend with the other handle of the Charge??I use the other flank when needed. It is stand alone, no problem. You can mix and match tools to a degree.
For example one can swap around the outside main blades but the internal tool widths make for some limitation on selection. Only one side can incorporate room for the removable pocket clip or lanyard attachment, whilst the other keeps the fixed retractable lanyard loop.@kkokkolis said:
Nice.
The regular bit holder could be there instead of the small one and the prying driver. And there's room on the other side for a couple of tools too, although it would be difficult to implement them without backspring or lockin mechanism.I couldn't get the regular bit holder and scissors to fit in the width. For memory it was wider than the flat screwdriver and small bit holder.
Yes, there certainly is some room at the plier end for some tool(s). -
That's a nice (and unusual) mod. I like it

-
Cool :)
Maybe if you fit in the large bitdriver, you can use the rest of the handle for bit storage?
-


have a Charge AL, which replaced an ALX I lost. I like the AL better- to me the fixed straight & the scissors are a more than fair trade for a second large bit driver. Don't miss the gut hook either.
Two questions...
- the bottle opener function is AWFUL. Is there a way to mod a Vic SAK cap lifter in it's place? Sacriledge but really. I don't open cans. I open beer.
- What is holding these together? The screws at the plier and end pivots look like 24-sided bolts? how do I tighten this bad boy up when it gets loose? I had my ALX for more than a year and it was getting a LITTLE loose. I'm a mechanic and use it frequently. Want to know how I can adjust it like my various BM/Spydercos - wish the body screws were Torx...
- Design is great. Build quality is incredible. F&F is iffy- if a blade like the main plain edge on this came out of the Kershaw factory someone would get fired.
- Why is this the only LM that has a good blade steel? 154CM instead of 420HC. That and the TTi with crucible S30V...
-
Your question re "what holds it together" is something that I'd be keen to know too. I've often wondered whether those splined pins unscrew with some sort of tool or are a type of rivet.
I specifically didn't but a TTI because I don't like gut hooks, I'd be more likely to cut myself than anything else with one ::) Shame they don't make a version of the Ti with the new style titanium scales methinks

-
Those screw can be tighened or loosened. Those ar what hold the together. As for as putting a Vic caplift in it, I am not sure. I did put the vic scissors on one. Worked put good.
live from Nate's mobile
-
@ducttapetech said:
Those screw can be tighened or loosened. Those ar what hold the together. As for as putting a Vic caplift in it, I am not sure. I did put the vic scissors on one. Worked put good.live from Nate's mobile
What do you tighten them with? Two slip joint pliers?
Sent from my iPhone using Tapatalk
-
Correct. But I tend to use two vise grips so they don't slip. Might want to tape the scales so you don't scratch the BO.
live from Nate's mobile
-
That makes sense - thanks

-
I really love my Charge more from day to day


-
To be honest, I haven't read much more than a single page in this thread. I just wanted to chime in and let you know how long it takes to fall in love with the Charge: Just about 45 seconds.
A customer came to the shop today to buy some luggage straps. For some reason, they are held together with the plastic-packing with cable ties, which are a PITA to cut. At the same time I was taking my Squirt P4 out of my pocket, he took a Charge from his belt-pouch and started looking for the gut hook.Even though it may have seemed a bit odd to him, I couldn't help but ask if I could see it for a minute. I only got to opening the two one handed blades, before handing it back to him. I didn't see exactly what model it was, but when comparing to Leathermans pictures it was either a TTi or XTi - the scales looked more like the TTi, but the blade was made of 154CM steel, not S30V.
tl;dr - In 45 seconds I went from "nah, too bulky and big" to "I want it, noooow!!"
Oh, in case that it might actually be someone from in here: The owner was a male, driving with german license plates, but speaking with a somewhat british accent. If you're in here, you should know you've made me very jealous. :ahhh
-
@Heywood Floyd said:
I have a couple of the older LM Charge TTi models and sometimes find it a bit more tool than is necessary. On those occasions an Alox SAK sometime gets the nod. But the standard 93mm Alox SAK doesn't come with some of the features that are box stock on the Charge TTi. Namely, scissors, locking blade, higher wear resistant blade steel (CPM S-30V), diamond abrasive file and removable pocket clip. So that got me thinking, maybe a Charge TTi with less could be more for occasions when my needs don't require a fully blown TTi.
So this is what I ended up doing some months ago. It's pretty light, has become a goto tool and does the business with great compactness and competence.



Ever since the first time I saw this I really wanted to do one of these. I would probably do two blades though.
If I ever get my hands on some parts it will be on the to do list.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


