Little Boy and Fat Man
-
Well I just put the fat man away and pulled out all my gear from the skinith.
I'm going to finish this review up using the little boy.
thoughts
I can do no more to the fat man to prove he's a great tool. Its been proven to me.

I prefer my st 300 to a swisstool but I prefer the Swisstool spirit to my rebar.
we will see if that changes after I use him more.
I'm going to ditch the ratchet, bits, and croc to lighten my edc. I was gifted a leatherman bit adaptor kit I will use in place of the ratchet and bits . I'm not sure what I will replace the croc with. A 4 inch crescent wrench or maybe a Gerber shard or something else. again we will see.
the es4 aka Honest John will be coming along. I like that little guy to much to leave him behind.the little boy will be working his butt off this summer. I'm not sure if he's up to it or not.
Only one way to know for sure.
-
I look forward to the summer of the little boy :D
-
I look forward to the summer of the little boy :D
it should be interesting.
I think I am going to break it.
I normally wouldn't take this small of a tool to work.
That's why it'll be interesting ;) I'm curious if it'll be able to handle your daily work. I'm looking forward to it for sure...heck, I'm looking forward to summer period ;)
-
I look forward to the summer of the little boy :D
it should be interesting.
I think I am going to break it.
I normally wouldn't take this small of a tool to work.
That's why it'll be interesting ;) I'm curious if it'll be able to handle your daily work. I'm looking forward to it for sure...heck, I'm looking forward to summer period ;)
I love the Rebar but it remains to be seen if it can handle the abuse. It's a lot smaller and I fear its implements may not hold up to as much stress.

-
If its anything like a wave, I bet it will make it just fine.
live from Nate's mobile
-
I look forward to the summer of the little boy :D
it should be interesting.
I think I am going to break it.
I normally wouldn't take this small of a tool to work.
That's why it'll be interesting ;) I'm curious if it'll be able to handle your daily work. I'm looking forward to it for sure...heck, I'm looking forward to summer period ;)
I love the Rebar but it remains to be seen if it can handle the abuse. It's a lot smaller and I fear its implements may not hold up to as much stress.

That's what I worry about as well. While it is likely a tough little tool, I'm not sure how much hard use it was designed to handle...
-
[quote author=Monrogue link=topic=49288.msg883012#msg883012 date=1398648166]
I look forward to the summer of the little boy :Dit should be interesting.
I think I am going to break it.
I normally wouldn't take this small of a tool to work.
That's why it'll be interesting ;) I'm curious if it'll be able to handle your daily work. I'm looking forward to it for sure...heck, I'm looking forward to summer period ;)
I love the Rebar but it remains to be seen if it can handle the abuse. It's a lot smaller and I fear its implements may not hold up to as much stress.

That's what I worry about as well. While it is likely a tough little tool, I'm not sure how much hard use it was designed to handle...
[/quote]I guess we are going to find out. He's on my belt today.
-
[quote author=JAfromMn link=topic=49288.msg883014#msg883014 date=1398648424]
[quote author=Monrogue link=topic=49288.msg883012#msg883012 date=1398648166]
I look forward to the summer of the little boy :Dit should be interesting.
I think I am going to break it.
I normally wouldn't take this small of a tool to work.
That's why it'll be interesting ;) I'm curious if it'll be able to handle your daily work. I'm looking forward to it for sure...heck, I'm looking forward to summer period ;)
I love the Rebar but it remains to be seen if it can handle the abuse. It's a lot smaller and I fear its implements may not hold up to as much stress.

That's what I worry about as well. While it is likely a tough little tool, I'm not sure how much hard use it was designed to handle...
[/quote]I guess we are going to find out. He's on my belt today.
[/quote] -
Sweet

-
Little boy just got his first use at work. Pulling coder pins
it worked just fine.I feel 10 pounds lighter.
I do miss my skinith though. I feel like I should be back on edcf with my loaded pockets lol.
PS edcf sucks

-
Here's my edc for this summer.

plus my bag full of gear.
-
The little boy worked out ok one his first day at work
although it was a easy day.
I was putting down plastic in a home thats going on display most of the day.
he cut a bunch of plastic, pulled a few staples, cut some carpet"to make door stops" tightened a few screws on a door frame and I used the wire cutters on some hard plastic straps that hold appliance doors closed.
all and all a good first day.

-
@JAfromMn said:
The little boy worked out ok one his first day at workalthough it was a easy day.
I was putting down plastic in a home thats going on display most of the day.
he cut a bunch of plastic, pulled a few staples, cut some carpet"to make door stops" tightened a few screws on a door frame and I used the wire cutters on some hard plastic straps that hold appliance doors closed.
all and all a good first day.

If you were able to cut carpet with it then that says a lot for the thin blades

-
The little boy worked out ok one his first day at work
although it was a easy day.
I was putting down plastic in a home thats going on display most of the day.
he cut a bunch of plastic, pulled a few staples, cut some carpet"to make door stops" tightened a few screws on a door frame and I used the wire cutters on some hard plastic straps that hold appliance doors closed.
all and all a good first day.

If you were able to cut carpet with it then that says a lot for the thin blades

I thought it was a good test.
The serrated blade made quick work cutting doubled up carpet.

It also held its edge.
The blade is a little short for my liking but worked well.I can use it hard because I got a spare :)
I'm going to try push this tool to its limits without breaking it.
I hope I don't. I really like my Bo rebar.
-
I found I could no longer carry both my MP600 and Rebar, it was just too much weight. So... I will now be alternating between the two. Currently it's the MP600 but I'll definitely be carrying the Rebar some days. I wear shorts (I live in Florida) with side pockets all year round so I use all pockets for my various gear. Whereas, you use a skinth, I just find pockets better to evenly distribute the weight.
-
@sawman said:
I found I could no longer carry both my MP600 and Rebar, it was just too much weight. So... I will now be alternating between the two. Currently it's the MP600 but I'll definitely be carrying the Rebar some days. I wear shorts (I live in Florida) with side pockets all year round so I use all pockets for my various gear. Whereas, you use a skinth, I just find pockets better to evenly distribute the weight.lol
I got to get a skinith for my summer set up.
Il fill my pockets with more stuff after I get one im sure.
Il be in cargo pants all summer. My edc gets heavier the more pockets I have to put stuff in.
-
This topic has past 15000 views.
thanks for following everyone.
I'm glad you all find my ramblings about my tools interesting.
we got about 60 days left. :)
January 1 till July 1
-
You keep it interesting Joel, so we can't help it ;) Keep up the good work bud

-
Thank you Kyle .
I'm proud of this one.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login