My first ...
-
Well, ... work in progress

First of all I would like to thank all of you guys. Then some special thanks for pro & rookie modders and their mod topics (Gareth, Syph007, Fattsgalore, detron ...) who are the most guilty that I'm doing ...
:DGot the idea, and still persist, to mod kinda of updated Troubleshooter - new file, serrated blade and corkscrew of course :D
Then I realized that an up to date sak "need" newer pliers (with crimper >:D) ... still waiting ...
In the mean time I "found out"
what are the missing tools on those troubleshooter ("missing" means that those tools are on Champ, of course :D) and so the decision was made: have to make a let's say 3-layer with those missing tools :ahhh

But then remorse occur, can't leave aside just one Champ's tool, which is actually very useful for french fries, mozzarella stuff like that, as jerseydevil expertly pointed out several times 8)
And so the "no name" 4-layer has seen the light of day, well not quite yet fully:

Because, because there is always because, the last pin was almost perfect, almost, so it happened that was
over peened 
:ahhh :ahhh :ahhhAt the same time evolved another piece - "golfpassenger" or perhaps "forkpassenger" (not yet complete, of course) :D but at least I made a few shoots:

This first two attempts were started on openers side:

At this point, when Gareth's technique was used, turned out that the best tool for lever the spring away from the pin is the small screwdriver


Fork-layer

After that I prepared for peening :D another one - kinda Modeler

To be continued ... :ahhh ;)
-
There looking good!!! Nice job so far!!
live from Nate's mobile
-
Thanks. Desperately need incentive for final steps ... :ahhh :D:D
-
good work, and nice to see a couple of original tool load outs.

Remember, there is nothing stopping you getting some more brass rod and pulling these apart and putting them back together again in different combinations. All good practice.
Mod on.

-
Cool! Good for you man!
I forgot there was a divot tools for 91mm. Ive never seen one yet in person.
-
Glad you jumped aboard the mod train, it's a time (and money) consuming hobby but so rewarding...
Never thought to use the fine screw driver for the assembly. Will try that next time.Two days ago I built a 6 layer from various SAKs. A piece from here a spring from there and voila...Handyman!
Still thinking of putting some Ruby+ scales on it to make it pop, but I'm not sure since it's purpose it to be a hard worker/beater.
What are your mods purposes, and what scales will be going on each???
-
And for your next mod you may want to think about my tool load out of choice.
Big blade, combo tool, scissors with or without hook, and pliers.Getting pliers is a pain. Not the easiest tool to find on the cheap.
-
Nice looking work so far
Once you get this down, you should get into Alox and make yourself a black and red color scheme custom like my Rogue
;) Good luck in your modding endeavors 
-
Awesome, inspires me to take the plunge.
Swiss Army knives .
-
Good stuff.

-
@Caranthanus said:
Got the idea, and still persist, to mod kinda of updated Troubleshooter - new file, serrated blade and corkscrew of course :DThen I realized that an up to date sak "need" newer pliers (with crimper >:D)
Great idea

I swapped a corkscrew into an original Troubleshooter to make a Deluxe Mountaineer, but I like your idea of updating the whole thing. A serrated main blade and new style file will be excellent. Maybe the perfect 5 layer 91mm! Good luck with the peening.

-
@PTRSAK said:
good work, and nice to see a couple of original tool load outs.
Remember, there is nothing stopping you getting some more brass rod and pulling these apart and putting them back together again in different combinations. All good practice.
Mod on.

Thanks
and You're absolutely right, so it was and so will be :D -
@Fattsgalore said:
Glad you jumped aboard the mod train, it's a time (and money) consuming hobby but so rewarding...
Never thought to use the fine screw driver for the assembly. Will try that next time.Two days ago I built a 6 layer from various SAKs. A piece from here a spring from there and voila...Handyman!
Still thinking of putting some Ruby+ scales on it to make it pop, but I'm not sure since it's purpose it to be a hard worker/beater.
What are your mods purposes, and what scales will be going on each???
The main purpose was troubleshooter, as said. Then those mod which complete the troubleshooter "missing" tools vs SwissChamp. Then a fork :D :D
And a lot of fun and troubleshooting
-
@Monrogue said:
Nice looking work so far
Once you get this down, you should get into Alox and make yourself a black and red color scheme custom like my Rogue
;) Good luck in your modding endeavors 
:D :D
Who knows, but for now I will not be doing the competition to master Syph007 :D
Now, when you say, I might have really started to think about :ahhh
-
@hiraethus said:
Good stuff.
Thank you. Slowly, but will go, as PTRSAK already said

-
Got the idea, and still persist, to mod kinda of updated Troubleshooter - new file, serrated blade and corkscrew of course :D
Then I realized that an up to date sak "need" newer pliers (with crimper >:D)
Great idea

I swapped a corkscrew into an original Troubleshooter to make a Deluxe Mountaineer, but I like your idea of updating the whole thing. A serrated main blade and new style file will be excellent. Maybe the perfect 5 layer 91mm! Good luck with the peening.

Exactly what I was going too, but then realized as you sad, and the rest is history ... :D
And Exactly what I was thinking about 5-layer

-
And here it is the "first one"

This one comes out in the first attempt
Let's say Modeler plus



-
Very useful looking SAK, nice work!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login