Alox scale removal?
-
Completely doable. No trick. But you will be completely breaking down the knives and reassembling the new tool loadout in the Alox scales.
The Alox knives don't have clip on scales like the cellidor ones, the scales take the place of the outer liners.
So be prepared for some drilling and peening.I did exactly this a week or two back to make my own Alox MiniChamp type knife
<a href="http://s1309.photobucket.com/user/Peter_Thorpe/media/output_zpsmok08ukd.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/output_zpsmok08ukd.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Yes.
You'll need a drill press, 1.5mm drill bit, and 1.5mm brass rod to reassemble.
There are plenty of more in depth how to's in the mod section...Good luck.
-
@PTRSAK said:
Completely doable. No trick. But you will be completely breaking down the knives and reassembling the new tool loadout in the Alox scales. The Alox knives don't have clip on scales like the cellidor ones, the scales take the place of the outer liners. So be prepared for some drilling and peening.Thanks very much, PTRSAK. That is exactly what I needed to know. By the way, your conversion looks great! Enjoy!
-
Yep as Peter said, all the parts are compatible, you just need to be careful drilling out the pins.
Ive got a few tear down pics in this thread too.
</topic/43286
I combined an alox slim usb and cellidor mini champ to make this one.

-
@Fattsgalore said:
Yes.
You'll need a drill press, 1.5mm drill bit, and 1.5mm brass rod to reassemble.
There are plenty of more in depth how to's in the mod section...Good luck.
Did you use 1.5mm rod? I used 1.6mm though.

Sent from my HTC One X using Tapatalk
-
@Glofindel, if it worked you can't argue with results. The factory uses 1.5 on the 58mm's...I'm almost positive. Like 93ish% sure.
-
1/16 slides into the holes of the liners freely...
Center drill will make pin removal easier. I no longer clamp the knife and just do this free hand.
-
@PTRSAK said:
Completely doable. No trick. But you will be completely breaking down the knives and reassembling the new tool loadout in the Alox scales.
The Alox knives don't have clip on scales like the cellidor ones, the scales take the place of the outer liners.
So be prepared for some drilling and peening.I did exactly this a week or two back to make my own Alox MiniChamp type knife
<a href="http://s1309.photobucket.com/user/Peter_Thorpe/media/output_zpsmok08ukd.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/output_zpsmok08ukd.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Someone from Spain with similar idea?
-
@Fattsgalore said:
@Glofindel, if it worked you can't argue with results. The factory uses 1.5 on the 58mm's...I'm almost positive. Like 93ish% sure.yep it works fine. I think it is just a hair away on small space it won't make any different.
Sent from my HTC One X using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
