New love for the Pocketwrench II
-
@JAfromMn said:
Pocket wrench 2 ownersI want to highly recommended Chapman bits for your pw2
http://www.chapmanmfg.com/AboutChapmanTools.html#anchor_274
They stay in place and won't fall out.
scroll down the page to learn about the bits

I find it works very well with the philips keyring I have, in between the philips end and the keyring end there is a hex section, which fits the pocketwrench driver exactly. Enhances the functionality of both keyring tools.

-
-
-
@enki_ck said:
Never seen the tubular one.
@enki_ck said:
[quote author=Cogito link=topic=45219.msg869549#msg869549 date=1396237570]
Is there a reason to go with a pocket wrench 2 vs the pocket wrench 3?Yes the reason to go with the PWII is because the PWIII doesn't exist yet. At least that I'm aware of at the moment.

Unless you count the PW Slim, but that's more of a MTO special.

How did that mod hold up in the long run?

Don't know, never did it. Maybe a bump of that thread might get you answers from the guys who did. I think Sparky still carries his.
[/quote]@sparky415 said:
^^^
I use mine for light prying, scraping and nut tightening and had no problems so far

I am going to use the fake pwII from the DX to try this out.

-
-
-
-
-
-
I tried to tighten a screw in the gap between baby car seat and it's base, first I use the mini surge, not enough room for the tool to work ( the driver doesn't lock at 90*) ; and not enough level age for just using the bit. Here comes in the new PWII!
I use it's bit driver to turn the bit. Worked great! That is something Croc can not do.Never thought I need a bit driver but I was wrong.


-
-
-
@nate j said:
I've always had trouble keeping the bit in place in my PW and my Croc.
Special bits are available for the PWII with stops and ball detents to hold them in place. They are on the expensive side though.
Chapman bits are great for that and not that expensive. And the mini ratchet is great.

http://www.amazon.com/s/ref=bl_sr_hi?ie=UTF8&field-brandtextbin=Chapman&node=228013


-
-
-
-
-
@enki_ck said:
This thread is one year old today. Here is a new pic of the different pocketwrenches over time
Great looking line up.

Didn't realize until now that the McFeely's was stamped upside down. Both the text and the teeth of the wrench. Strange.

David, that is an amazing collection. Thanks for sharing that picture.

-
I like the Pocketwrench II, as well, but I wish it was more useful for prying.
Earlier this month, I conducted an informal test using a few of my one hand multitools to remove staples from an envelope. The Pocketwrench II was the worst of the bunch because both ends are rounded and I couldn't get the tapered end to fit underneath the staple.
The Nite-Ize DoohicKey worked well because I was able to fit a sharp corner of its "screwdriver" end underneath the staple. The Gerber Artifact and Schrade titanium keychain tool worked better than the Pocketwrench II, too.
Was thinking about whether I should cut a V-shaped slot in the end of the Pocketwrench II as found in the Gerber Artifact and other pry type tools.


-
Thank you enki_ck and Mr W. The McFreely stamping and teeth are backwards or reversed to the others. It also has different style lettering.
Parnass that might be a good mod. I've thought of several different types of mods but cant seem to make a decision as what I really want to do yet.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login