EDC Light?
-
Always have the little fauxton clones on my keyrings and I've been carrying the Orb raw or a modded Fenix l2p single cr123.
-
Sure fire G2Led. Best light for me!
-
I still EDC my L2D Q5 and my alternate EDC is Coast LED Lenser 1xAA. Have to defer acquiring a TK10 in favor of a new camera.





-
I carry the Mini-Mags pretty exclusively.I know that there are better brighter lights out there,but the Mini's are cheap,durable,and bright enough to get done what I need.I carry two every night while at work.One with one of the batt's flipped as my spare in my back pocket.The other rides in my Niteieze ToolPockits.
Dtrain
-
@Dtrain said:
I carry the Mini-Mags pretty exclusively.I know that there are better brighter lights out there,but the Mini's are cheap,durable,and bright enough to get done what I need.I carry two every night while at work.One with one of the batt's flipped as my spare in my back pocket.The other rides in my Niteieze ToolPockits.Dtrain
Dtrain, are you carrying incan MiniMags or LED MiniMags?
.
-
I have One MiniMag with the standard bulb,this is My Back-up Light.The Light I rely on for most of my work pre-tripping trailers,illuminating things while I make a quick repair,checking seal numbers,ect is another MiniMag with a Niteize Conversion kit installed.I am pleased with the Niteize LED.My battery consumption has gone down considerably,the difference in the brightness between original bulb and LED is not that bad.I have a second LED unit in one of my son's lights.For some reason that one is not as bright as the first one.The only thing that I did after plugging it in was to pull it back out a bit then put a couple of drops of superglue between the LED Module and the base on the flashlight.I have found that this keeps the module from coming loose when twisting the head of the light to the on position.
When I am dressed up a bit or have no need for what I normally carry during the week I wioll drop a Solitaire in my pocket to supliment my SwissChamp.
There are brighter lights out there in this size,but they are once again....
Cheap
Durable
Easily Replaceable/ServiceableIn my wife and I's bedroom I keep a 6 D-Cell on duty for blackouts,or Self-Defense
.I keep a 2-D Cell in my car,my Wife keeps a Mini-Mag in her purse.I like the AA's over the AAA Mini-Mag.Nothing against the AAA Mini,but it seems like the batteries go pretty quick,but the do fit in a shirt pocket quite nicely.
Unfortunatley,every time I pick one up for this purpose it vanishes or some other misfortune occurs.The last one I had slipped out of my back pocket while I was checking the slack adjusters on the truck I drive.I ended up backing over the rascal :'(before I realized it was gone.Even without a trailer hooked up my DayCab still pushes 5 ton or so.
I do not expect any flashlight to hold up to that

I might try one of the 3 AA LED Models from Maglight.It will not fit in my Niteize ToolPockits,but I figure I can jam it in a back pocket when out doing my thing then stash it in my bag when I am rolling.
Dtrain
-
@Dtrain said:
There are brighter lights out there in this size,but they are once again....Cheap
Durable
Easily Replaceable/Serviceable
...
I might try one of the 3 AA LED Models from Maglight.It will not fit in my Niteize ToolPockits,but I figure I can jam it in a back pocket when out doing my thing then stash it in my bag when I am rolling.I agree completely. There are better, brighter lights available (Streamlight, Fenix, etc.) but they're not as widely available, they cost more, and they aren't as easily modable as the humble MagLites.
MagLites are plenty "good enough" for most people.
The MagLED lights are vastly superior to flashlights the vast majority of non-flashaholics are used to making do with. Whenever I let a non-flashaholic borrow one of my MagLEDs they are always amazed by its performance.
Any reason for you not to try a MiniMagLED 2AA? They're fairly decent IMHO. The 2AA output isn't that much less than the longer 3AA MiniMagLED, but they're enough shorter to make for easy pocketability. Plenty bright enough for outdoor tasks at close to medium distances. And, their throw isn't bad at all - Mag knows how to design decent reflectors.
.
-
The only gripe I have about the AA MagLEDs is their regulation curve. The regulation is flat, but when the batteries expire they do so VERY QUICKLY, and don't give the user a "moon mode" to work with while he finds replacement batteries. This is fine for day-to-day use, but would be a very poor option in an emergency situation.
-
@NutSAK said:
The only gripe I have about the AA MagLEDs is their regulation curve. The regulation is flat, but when the batteries expire they do so VERY QUICKLY, and don't give the user a "moon mode" to work with while he finds replacement batteries. This is fine for day-to-day use, but would be a very poor option in an emergency situation.I agree, but some people actually claim to prefer this style of regulation: flat output right up until a sharp cutoff.
There are often arguments over this topic on CPF, so I'd have to say it's a matter of personal preference.
.
-
There are brighter lights out there in this size,but they are once again....
Cheap
Durable
Easily Replaceable/Serviceable
...
I might try one of the 3 AA LED Models from Maglight.It will not fit in my Niteize ToolPockits,but I figure I can jam it in a back pocket when out doing my thing then stash it in my bag when I am rolling.I agree completely. There are better, brighter lights available (Streamlight, Fenix, etc.) but they're not as widely available, they cost more, and they aren't as easily modable as the humble MagLites.
MagLites are plenty "good enough" for most people.
The MagLED lights are vastly superior to flashlights the vast majority of non-flashaholics are used to making do with. Whenever I let a non-flashaholic borrow one of my MagLEDs they are always amazed by its performance.
Any reason for you not to try a MiniMagLED 2AA? They're fairly decent IMHO. The 2AA output isn't that much less than the longer 3AA MiniMagLED, but they're enough shorter to make for easy pocketability. Plenty bright enough for outdoor tasks at close to medium distances. And, their throw isn't bad at all - Mag knows how to design decent reflectors.
.
That is an option.I have been reading about regulation and stuf.I guess that is why I carry a back up light.
I drive at night,and rely on my lights to keep myself and those who share the roads with me safe.
This is a really fascinating thread.
Dtrain
-
There are brighter lights out there in this size,but they are once again....
Cheap
Durable
Easily Replaceable/Serviceable
...
I might try one of the 3 AA LED Models from Maglight.It will not fit in my Niteize ToolPockits,but I figure I can jam it in a back pocket when out doing my thing then stash it in my bag when I am rolling.I agree completely. There are better, brighter lights available (Streamlight, Fenix, etc.) but they're not as widely available, they cost more, and they aren't as easily modable as the humble MagLites.
MagLites are plenty "good enough" for most people.
The MagLED lights are vastly superior to flashlights the vast majority of non-flashaholics are used to making do with. Whenever I let a non-flashaholic borrow one of my MagLEDs they are always amazed by its performance.
Any reason for you not to try a MiniMagLED 2AA? They're fairly decent IMHO. The 2AA output isn't that much less than the longer 3AA MiniMagLED, but they're enough shorter to make for easy pocketability. Plenty bright enough for outdoor tasks at close to medium distances. And, their throw isn't bad at all - Mag knows how to design decent reflectors.
.
That is an option.I have been reading about regulation and stuf.I guess that is why I carry a back up light.
I drive at night,and rely on my lights to keep myself and those who share the roads with me safe.
This is a really fascinating thread.
Dtrain
Try replacing your backup MiniMag 2AA incandescent with a MiniMagLED 2AA. It should fit in your NiteIze pouch and basically anywhere else your old MiniMag 2AA fits.
If you use the 2AA MiniMagLED very much, it'll pay for itself eventually. How? In terms of cash saved not buying so many AA cells and never buying replacement bulbs.
.
-
Hmmm GrassHopper have much to learn from Masters of Illumination.
Dtrain
-
@Dtrain said:
Hmmm GrassHopper have much to learn from Masters of Illumination.Dtrain
I use a 2AA l.e.d Minimag for work and find it ideal it's bright but not blindingly so for use at close quarters it will light up an average backyard in this countryand I only need to replace the batteries every 2-3 months depending on use
-
Fenix lod-ce, fits nice in the sheat of my LM wave. Not much lights do, diameter and lenght wise. I do like all my EDC stuff in one package (safes time in the morning getting dressed :D). And this little light gives enough light for my needs, not that expensive, nicely build, high and low settings and runs on a everywere avalible aaa.
-
@Dtrain said:
What is the average price for the 2 and 3 AA Led for Mag.Dtrain
Amazon lists it for 18 to 22 bucks:
http://www.amazon.com/Instrument-Maglite-Flashlight-Holster-SP2201H/dp/B000HFBR1O/ref=pd_bbs_sr_5?ie=UTF8&s=hi&qid=1213977413&sr=8-5Most of the big box stores (WalMart, Lowes, Target, etc.) usually have it for a price at the higher end of the Amazon listings, unless you catch in on sale.
But, I wouldn't mess with ordering a Mag online to save a few bucks.
A big advantage of Mags is that you can walk into any of thousands of stores all across the USA and just grab one.
Instant gratification. Plus, if you don't like it for any reason you can easily exchange or return it.
.
-
I EDC a 2 AA maglite. Mine is the incan. with a niteize replacement. Niteize makes two types of replacements. One is a single cell, and the other is a cluster of 3. I used the cluster for over a year, and recently upgraded to the single cell. The single cell is also a bit warmer than the cluster. It is such a great improvement that I'll likely carry my mag for a long time. Total cost of a mag + a single cell Niteize: $25. I do own a 2 AA magLED, and while the field is smoother than the niteize single cell, and the focus is a bit more adjustable, the length is just a bit longer than I would like. One cool thing Niteize makes is colored LED retrofits. These come in the form of the 3 cell clustered version, and are available in red, green and blue. I just got a blue one for backstage work, and the output is rather impressive for what it is.
I do want a Surefire, I know I want one that is LED with a high output and a compact package, nothing larger than a 2 aa minimag, I just can't decide/determine what I want.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login